Dual Universe Creators

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 my latest static building is a large factory you can visit in vr seacrh for loaded industries showroom and exit that building and your find this factory across runway, this large core factory pretty much takes up the full height of a large static core and comes with 5 floors, you can copy and paste more racks and place as you need them or you can even delete all racks and turn in to a showroom or anything you like, there are 2 different blueprints one with and one without a expanded small gate so you can build without spending millions on a door that you can add later if you wished, any questions please message me on discord, location to your right for dispensers and please dont buy in VR

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

In the process of moving, blueprints are available to Kosmos Exchange. Get into space quickly and easily with this S core space station. Whether you're new and want to give space a try or a veteran needing to set up a refueling/storage station in orbit, this is for you. Plenty of storage space, room for some industry, clean control center/small hangar and landing on top. Need More landing space? Add on landing pads available. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

Developed by Consolidated Aerospace's infrastructure and Industry Command [I.I.C] this very basic functional factory is designed to make and maintain 8000L if Atmospheric fuel and 8000L of Kergon X2, As long as materials and schematics are fulfilled Required Ore for 8000L of fuels [Estimated] Quartz 2,129.40 Coal 2,059.20 Limestone 3,903.90 totals 8,093

This is a one large core showroom, one big open space with viewing balcony this was made from the panel showroom kit, has small enternace and large enterance and has a flat roof for easy parking, comes with detailed panel flooring and sign space to add lettering/logo, i havnt placed any glass panels in this building as i see no point as they are totally clear now, they lost there blue tint in last update, you can get complete honeycomb kit aswell at my location for easy hassle free deployment when placing its 1 click down if your stood on another cores voxel when you deploy the blueprint, no need to do the 1 click down if your standing on the ground and the small enterance is facing you when you deploy the blueprint any other questions please dm me on discord loaded#2378

M core with landing area on top, and one level of rooms below for decorating / small industry / storage 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Blue Plastic & Luminescent Icy Blue Glass: replace with color of your choice when customizing 4k alu 1.5k plastic 500 iron 100 carbon fiber / steel

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

When not crashing into the ground at 5000km, perhaps you'd like a place to land nicely with a touchy of style on something that's super easy to put together? Sounds like CzarsLandyPad might work for you. I like the looks, my mom likes the looks, my dog thinks it's stylish, and my goldfish can put it together. Customizable from XS size all the way to custom multiple core sizes. As a perk, when assembled, a landing pad can also house all kinds of stuff inside....yes, inside! Tall enough for a large container which we all know can house many dead bodies from your pvp conquests or imagination. DRM free It's on an XS dynamic core so you can put it anywhere and even dock and transport. Come see them in action: Alioth Space VR coming soon

Greetings Noveans. Introducing my first upload..... my S Core fuel station. It's DRM free so you can move it onto a larger core if you wish to scale up the container storage or place it at the end of your L core runway. 3 Fuel pumps with dispensers which can be configured to your own requirements, and space to expand to 5 pumps if necessary. Shop area with cash machine , refreshment vending machines, shelving for spare ship parts (Supplied empty due to upcoming beta wipe), 4 dispenser slots to sell scrap and warp cells, and a cashiers office. The rear of the office has a small empty stock room with an elevator to the fuel refinery upstairs (Again.,there is space to house the industry units to support 5 fuel pumps.) Special thanks to my Kosmos Org Mates for your help & encouragement: Scourgy (for the pump design), Captain Harlock (for voxelmancy lessons), Lunarzkii & fridaywitch Please note: The inside may be very bright if you play with "shadows off" on your graphics settings... if this is the case, you may wish to remove some of the internal light fixtures. Please contact me on my discord to rectify any problems, or if the dispenser needs refilling. I appreciate your feedback (17th Nov 22) - dispenser is placed at Kosmos Showroom. (Alioth) ::pos{0,2,2.9117,105.4578,53.1729}

Originally designed in Alpha 1, this stalwart Logistics Centre is a great benefit to most serious solo players, and small to medium Organisations. Boasting a whopping 201 Large Containers, managed over 68 Hubs to provide 576kl each at Basic level, this Logistics Centre can really help ensure you keep organised and well stocked! Featuring two Storage zones (one above, one below ground), two large offices for Lua projects, entertaining guests or providing a dispenser store front, with two smaller offices for personal use, a loading bay for small haulers and 2 landing pads on the roof, capable of handling smaller M core ships. Please note: Decorative elements are used only for advertisement / suggestion. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Moved to Alioth, 7km north of Market 6. ::pos{0,2,39.2832,101.0451,299.8752} VR to "Pagoda".

Landfall pads large core landing zone. vr ADMI Build Store or visit ::pos{0,2,-24.6313,16.8071,150.4663}. (Large static core) questions emladra#8532

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"