Dual Universe Creators

Own a Warp Beacon of your own - Then make one , in this faithful recreation of the must have strategic element. Get the Bacon cooking ! With DIA customised industry, storage and schematics monitoring and IC industry AR HUD scripts, incorporated into a modern stylish command room, you'll know precisely what you need and when you'll get your coveted beacon. Configured to be able to produce two beacons per month, all machines and storage are linked and signed with what to produce and appropriate maintain levels. Come see the wonder at the DIA Plaza and find the BP dispensers in our Showroom display. For those not interested in cooking bacon, but other tasty treats, get the voxel shell to build your own factory into - only 20Mq

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

This makes every size Vertical Lights! --- 24 Hour Production with no boosting talents --- Vertical Lights XS - 960 Vertical Lights S - 240 Vertical Lights M - 240 Vertical Lights L - 240 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

(Contains empty open spaces for starter industry placement.) Due to the hostile environment they live in the Dune Dwellers of Haven are not discrete in their willingness to steal materials and technology from the UEF. While they may not hide from other factions they do make great efforts in shielding themselves from the hot punishing sun. Note: Does not include Mining Silo, Sand Raptor, or Dune Hauler. (Tokens will not be made available) Featured by: - Landmark Explorer Twitch Channel

This Large Warp Cell Factory will produse 1440 warp cells every 24 hours with no industry boosting talents It 5 time more in production then my M core warp cell factory I do not have this up for display. I built this for a customer that supplied the industry for me to build. I tore it down for him to pickup after i completed it. This factory is built in my L core Factory Shell. Has plenty of room to add more into this building as you desire. For future reference if you add more into this factory and decide to move your location, i will create you a bp of it under certain circumstances: i would need to see the factory before you tear it down as i will create the core bp at that time, then when you tear it down i will need to come back to the same location and see it no longer exist then i will make you a bp of it at the cost it takes to make the L core BP print. We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

This is my vision of Mining Rig Outpost Whit 5 mining units and one Refiner room 1 Ore Container and 1 Pure Container you have a small landingpad on top for your small cargo ships Discord: https://discord.gg/cTU9sPtnsR VR: this will come BP Cords ::pos{0,2,-1.1524,178.6534,54.5918} VR: Dark Forges HQ

No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

The plan was to test out how to make a space station about 65KM from the planet. Assuming I'd succeed the idea behind the station was to use it for making fuel and basic scrap without having to land on the planet. So I obviously succeeded at making the space station however, the location was completely wrong for the job. It turns out you need to make the space stations away from where your bases are and stock them with resources you need at those locations. That said it was fun doing it for the first time and the views are super.

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI

This Station kit comes in multiple options. It cost 5m per BP. If your purchase in bulk the price will go down. Options Empty = Just the Shell. Standard = 2 x S core shelves, 6 XS core shelves, 20 L containers Standard With elevators for display = 2 x S core shelves, 6 XS core shelves, 20 L containers Standard with Ports = 2 x S core shelves, 6 XS core shelves, 20 L containers with Port access designed to work with the station kit you can have for free. Landing Pad = This is a flat landing pad designed to be placed at the end of the tunnels or on top. They are designed to be flexable and allow for uncovered parking for guest or extreamly large ships. " Landing Pad BPs are 1m each" Gate = This comes in 2 sides L and R with an XL gate in the center when connectect making a double XL gate opening. Aswell as Medium doors at the bottom for access to the landing pads outside. The gates are on Recievers to use with emitters. Just set the channel you want. Storage = No shelves 10XXL containers, 20 XL containers, Ability to copy and paste storage racks to add 50 additional XL containers and 20 aditional XXL containers Please contact me on discord for sales Seripis#0466 and Seripis in game. Dispensors will be up soon working on showroom. You can see the station at ::pos{0,0,361822.9769,97685.1034,174037.2009} Above Alioth or VR to Seripis Station

PYRAMID FUEL FACTORY: MAKES FUEL, AND A LOT OF IT MAKES; NITRON 600KL PER DAY KIRGON X1-X4 300KL PER DAY OF ONE OR APPROX 75KL OF EACH EASY TO SET UP, EASY TO EXPAND STORAGE WE NOW HAVE A MODEL THAT MAKES XERON TOO 100KL PER DAY same price READ OUR BIO FOR MORE INFO

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)