Dual Universe Creators

In the process of moving, blueprints are available to Kosmos Exchange. It's Honeycomb...in space! No longer will you need to make element only ships deep in space, put some voxels on it and style that thing up! PvPers, come on, put a skin on that naked hot dog you're shooting with. You can even dress it up as an actual hot dog with the right voxels at your fingertips. Factory is built on my Fidget station technology and features T1-T3 honeycombing capabilities. Easy to use LUA control for the honeycomb machines (html needs to be enabled for T3 due to a technical issue with Aerogics honeycomb script so using SilverZero's older script that still works like a champ). Come see it in VR at "Czar in Space Showroom" either fly outside or head to the small unmarked door on the end with the landing pad sets. Located in person here ::pos{0,0,-41989.3752,202219.7557,33651.8498}

Back by popular demand! My #1 selling space factory shell. Ample room to run any type of industry and plenty of room for storage. The base is a full L core footprint, and there is a full L core landing pad on the roof for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

Hey, you! Yes, you need a small and efficant scrap and fuel factory?? And some good script as well? Well check this one out !

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

50% off blueprint price at the moment on dispenser This is the standalone outpost style pad, built on a large core placement rules are just 3 clicks down when your blueprint is flush with the core your stood on once you have it lined up, if your flush on soil/ground just do 2 clicks down you can view at the location written on the right of the screen or view in VR search for loaded industries showroom and your find the structure at the end of the runway, dispenser is located on the structure any question please message me on discord

XS Core Bunker. At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} More Comming Soon!

If you're like me, you love Dual Universe and the amazing freedom it gives us to build whatever we want. However, some of us are more inclined to fantasy settings over Sci-fi. Others might just want a change of scenery for some of their buildings. If this is you, then check out Stormsteel's Fantasy Building Kit. This kit uses almost entirely t1 honeycomb by default, with the tiniest bit of lumi glass. The Fantasy building kit includes pillars and several wall stylings to build a castle or cathedral-like structure. Various doors and windows allow you to differ your indoor vs. outdoor styling or just have a nice variation all around. The kit also includes several decorative voxel pieces such as crystals and hanging banners. This Kit will continue to be updated, and as it improves the price may rise. However, once you own it, you will never have to pay more to receive the updated versions. See below for current version and Changelog. VR to "Stormhold" to see the Fantasy Building Kit in person, as well as Stormsteel's personal hanger build with it. Blueprints can be purchased via Dispenser at ::pos{0,2,51.3456,99.1264,-0.0000} - BPs can also be delivered to you at any of the District Markets (especially 6). The BP dispenser at the entrance of the hangar. At the top of the stairs pictured above. Current Version: 1.1 Change Log: 1.1 -Basic Blue Ceiling Added (inluding diagonal section) -Added floor tiles to go over diagonal wall peices -Added parapets to go on top of pillars

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

2B Designs Hangar L Core Size Hangar - Plenty of Workspace - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - Good Size Landing pad - Elevator / Hole Access to floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) VR: "2B Hangar 2B01 Display" For a display of the Hangar Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

MK logo. 184x184 voxels/46x46 meters VR: The Syndicate Shop BP can be purchased on Alioth near market 6. ::pos{0,2,31.6129,108.1439,2.4078}

BP dispenser located on Alioth at ---> ::pos{0,2,24.6416,120.5044,3.8850} That building is in an L Core. I don't like the huge factory blocks at all, so I took an L Core and gave myself free rein in the dimensions and design of the building. From my point of view, the entire core does not always have to be used. It is important to me that buildings fit in well with their surroundings, be it in the city or in the country. The building is an empty shell! Setting up the factory or your office in the building is entirely up to you. Below the asphalt there is enough space for you to build your own cellar with containers and industry. you can find the core in the center below the floor if you have any questions or suggestions for improvement, please let me know! VR: "Calpone Showroom" dispenser ---> ::pos{0,2,24.6416,120.5044,3.8850}

In the process of moving, blueprints are available to Kosmos Exchange. What we have here is the brand-new warp cell factory from Czars Workshop. Making up to 280ish cells a day, this is the perfect addition to any of my modular space stations or space landing pads. Let Czar help you live in space! See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

DPS Pads - built as building area pads, also usable as showroom and parking pads. Single static XS 2,500,000) and S (3,000,000) BPs DRM protected. DRM free BIY kit and space versions available soon. VR: Deeh Store (dispenser + preview -> basement) If you have questions, don't be shy - contact me on Discord!

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}