Dual Universe Creators

PYRAMID LUMEN GLASS FACTORY This factory can make a ton of luminescent glass in a day! 12000m3 per day! Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Pays for its self on day one! READ OUR BIO FOR MORE INFO

A fully set up fuel and warp cells space module. 72 cells per day without any talent, Kergon, Nitron and Xeron fuels Custom LUA to manage and monitor production Uses two main hub with each 10x containers L: Ore & schematics hub: Input hub for all schematics and ores except pyrite Fuel / Pyrite / Catalyst3: Output hub for fuel and cells. Also used as input for pyrite and catalyst (optional and only used to speed up initialization) To start production, go down to bottom level and run each board (7) until screens go green. Those will set up each machine by selecting recipes and start them with correct maintain values. Special thanks to Captain Ardan and RyanPryde for their voxel kits and Jericho and SilverZero for LUA resources https://github.com/Krengus/DU_ASTco/blob/main/Warp%20%26%20Fuel%20Space%20Module/monitor.json

Large Hanger Pick your accent color or Luminescent color glass of your choice when you deploy your hanger. Build Comes Standard with Blue Luminescent Glass. The build is sized to accommodate the XL Gates when you are ready to add hanger doors, admire the magnetic gantry cranes. location: ::pos{0,2,5.1035,163.8590,28.5577} POC: Puunene#4859 VR: Puunene Hangers

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

Built in the same theme as my #1 selling L Core Factory. 3x's the room and still includes the full L core landing pad on top for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

50% off blueprint price at the moment on dispenser This is a complete kit of my landing pad without basement, you can make any size landing pad you like even connect 4 cores together for extra large one or even larger, ive tried to make the instructions as simple as i can but hopefully if your interested in this kit you already know how to copy and paste and rotate etc please check out the pictures for more info and if you need any questions answered dm me on discord loaded#2378, location on your right in the info and the dispensor is in front on the landing pad, i also added a base part with no wiring details also u will want plenty of medium glass panel to go over the wiring detail, can also change the colour to your what ever you like. PS no need to press shift when adding the leg stands

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

ETA Mining Platform Easy Cheep and better then nothing. BP requires 4L containers 1 Hubs 8 Square light s 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

VR: "VO Factory Sales" 24 Hour production with no talents Advanced Atmospheric Engine XS - x80 Advanced Atmospheric Engine S - x20 Advanced Atmospheric Engine M - x5 Advanced Atmospheric Engine L - x2.5 Advanced Space Engine XS - x80 Advanced Space Engine S - x20 Advanced Space Engine M - x5 Advanced Space Engine L - x2.5 Advanced Space Engine XL - x0.6 Advanced Hover Engine S - x21.2 Advanced Hover Engine M - x5.3 Advanced Hover Engine L - x2.6 Advanced Flat Hover Engine L - x2.6 Advanced Vertical Booster XS - x80 Advanced Vertical Booster S - x21.2 Advanced Vertical Booster M - x5.3 Advanced Vertical Booster L - x2.6

Greetings! I present to you a warp cell factory that produces 240 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 15m Quanta 2 - Blueprint + Buffs/Help setting up, 30m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 50m Quanta

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom

Designed to be an entry for the NQ Build Your Legacy contest. Feature an all-in-one outpost for a good start and a safe place on heaven.

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got all that and the chips! L Core Space Factory shell. Lots of space to make your factory look pretty cool. Getting tired of stacking machines your machines on voxel landing pads? Well stop doing that and factory in style. Tons of hidden storage space. Easily see your machines, lay it out as you like. Center command platform with multiple levels and even decorative hangers (hydroponics look is my set up). Modular set up makes it easy to set up with additional modules including hangars, landing pads, storage modules, elevator modules and more. Come see it in VR at "Czar in Space Showroom" or directly "Czars Space Factory" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155} (Please note that VR and in person is an active factory and may have changes made that are not included in the blueprint, please ask if you have any questions)