Dual Universe Creators

This Is a Ore to Fuel Refinery. Makes all Fuel types (One fuel per core) 20 Refiners. 10 Chemical Industry. 14 Expanded Container XXL. Transfer units very on fuel type. Concrete can be replaced with brick for almost same effect.

Blueprints are now available for purchase at Hadron HQ Alioth. ( ::pos{0,2,-21.7618,122.5465,114.3602} ) Extra low cost! Buy as many as you need to deploy. MC Industries presents the Basic Platform S, a multi-purpose S core platform that is designed for low cost and maximal utility while presenting a heavy-duty industrial aesthetic reminiscent of offshore drilling platforms. The tall pillars upon which the platform rests allows for the most flexibility for placement on uneven terrain with minimal terraforming, that a small core would allow. Only tier1 materials are used, so it could be deployed quite soon after launch. It can easily be used as a remote mining platform. Six openings in the floor allow mining beams to penetrate and the raised platform allows plenty of room for ore to spawn beneath the mining units for easy collection. The interior features a display stand with space for two large transparent screens and shelves for placing container hubs, programming boards, detection zones and all the other elements needed to support mining and factory LUA applications. There is enough space for 10 Container L inside, plus the mining units and even a few industry units for ore or fuel refining. The roof of the structure can be used as a landing pad for small craft with a ladder providing access. If you don't want the mining unit holes in the floor, a simple copy-paste operation can be done to replace them with a floor segment that is solid. Though the photos show some elements placed, the blueprint is supplied without any elements. Just voxels. You can grow and expand the amenities like LUA and larger containers as Noveans manufacturing capabilities expand after launch. So if you want a mining or industry platform that is cheap to build but looks better than a flat piece of silicon honeycomb and can grow with your Novean talents, take a look at the Basic Platform S from MC Industries.

A nice looking space shipyard (Big L core) with a lot of lights!! perfect for ship building in space. The bridge on the side are for u voxel liberies u can get to them realy fast with elevators on the ground. If u have any questions ask me on discord Jasper_1. Are u looking for space stations space hangars space factory look no further!! and dm Jasper_1 discount if u buy more: 2 for 12 mil 3 for 15 mill 4 for 20 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

PYRAMID OF KHUFU PERFECT SCALE REPLICA OF THE GREAT PYRAMID OF GIZA LARGEST POSSIBLE ON AN L CORE PERFECT 3-4-5 TRIANGLE 20,000 M3 VOXELS 2 ELEVATORS 50 M3 LUMIN GLASS THERE IS AN OPENING ON THE LEFT THAT ALLOWS EASY ACCESS FOR BUILDING WHICH CAN EASILY BE CLOSED WITH THE LINE TOOL. THERE IS ALSO A SECOND CAPSTONE INSIDE NOT MADE OF LUMEN GLASS TO AID IN GETTING CREATIVE WITH THE COLORS THE PYRAMID TOP CAN BE.

drm free VR: "Alioth Marina"

Space Core pad large. vr ADMI build store or visit ::pos{0,2,-24.6313,16.8071,150.4663}. large landing zone (large space core). questions ask emladra#8532.

Make a feature of your unsightly DSAT and turn it into an observatory. Voxel shapes only... pls decorate it in your own style... dm me if you want the image and i'll link it. Available to view on my Alioth Base to the left of the hangar behind my Yacht's dock. DRM FREE.... so you can copy and paste it onto an existing core. BP's available in the lil BP shop on my Alioth base HERE ::pos{0,2,2.4733,104.9278,1.5932} You can view all of my creations in vr....Orri Alioth Base... and you will arrive in the airport arrivals hall thanks for looking :-)

The IC Citadel Station is an all-purpose single core space station designed with future PVP in mind. Currently we are only selling Blueprints. The blueprint does not include the Warp Beacon or weapons to make it easier to place. Armor: 4 to 12 meters of Nickel, Copper, and Steel armor. Weapons: 8 Gunner seats with a total of 64 hardpoints for weapon placement Storage: 80 Large containers linked to 8 hubs. Industry: Warp Cell Production ~550 warp cells per 24 hours Fuel Production - Kergon X1, X2, and X3 (or change schematics to make whatever you want) Scrap Production - Tier1 - Tier5 Repair: 4 Repair stations, each linked to 5 large containers

A Fuel and Cell Station Module on M core Small landing pad on top for S core size ship Control tower with 360° view! 4 corridors to connect other modules / space elevator No machine on the blueprint Lower area has several spots for various industry machines, ie: - rounded area can hold up to 20 containers L - 36 refiners / smelters in angled corners - 16 chemicals / glass furnaces in center can be seen on VR: Aerogics Space Station

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura X8 Pro is our most ambitious rig yet! All the features of the X8 with a new look and larger landing pad. M Core design for extending the landing pad even more if needed. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/TB2ecEd5rs --- Buy Locations --- ::pos{0,2,12.8827,97.8847,-0.0001} VR : Locura Distribution Sales

"Techo Advance" is a luxury villa, complete with various unique voxel elements, like cooker, pots & pans, shield art, weapon displays, and so much more. Showcase video https://www.youtube.com/watch?v=AxA3Km_OhAI This modern art work consists of a functional S core elevator to move personal vessels into an underground hangar. It also has a personnel elevator at the entrance to the villa which acts as a permanent barrier when not in use. Lastly, a vault door to secure your most valuable possessions! For the interior there is a fully kitted kitchen with fridge, countertops, cooker and two basin sinks. Dining, lounge, meeting, cinema and bar all beautifully designed with ancient artefacts! Contact: Actimist#4020 Primary designer: IEYESI Contributors: Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Simple' version, a lower cost entry into the Omnifactory with minimal industry elements required to deploy. This does mean expanding capacity is a little more involved than the up-coming 'Expanded' version, requiring each new industry machine to be linked to each component storage directly. However, the layout configuration and open structure allow this to be accomplished with minimal effort. BP dispenser is set up inside the Omnifactory for a extremely reasonable price of 25Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

The X50 is the big brother of the X40. It is uppgraded with a L container and 8 L MU´s, you can mine all that you need. And with the X50 there are coming a an uppgrade that will blow you mind so keep an eye out on this one!

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}