Dual Universe Creators

PYRAMID GLASS PANEL FACTORY: Produces nearly 1000 Large panels a day 2000M 3000S Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Easily adjust to make more or less of each type READ OUR BIO FOR MORE INFO

L core tower with Hangar and lots of space for Industry VR: SKY Blueprint Store ::pos{0,2,54.1655,109.9058,46.1828}

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

makes all the basic elements and XL uncommon space engines ,vr MAGIC ELEMENTS FACTORY . location: ::pos{0,2,40.7473,91.6040,93.7875}

This factory is perfect for starting a mega factory in space from scratch. All T1 setup is already in BP with all products and parts. You can easy start to build everything you need with this setup. 5 floors T1 to T5 and a big space with view on planet with glass panel You only need puts ores and schematics to begin. To visit the factory in VR, contact me on discord : kromen New Alioth Dispenser ::pos{0,2,41.7148,93.8707,74.8080} Visit Factory ::pos{0,0,-13786.3354,203690.3859,55550.9950} VR : Space Factory Beginner Credits for scripts : https://github.com/LocuraDU/DU-Locura-Storage-Info https://github.com/codeinfused/Indy-Hud Credits for Landing pad and wall : https://du-creators.org/makers/Loaded%20Industries

XS Core Bunker. At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} More Comming Soon!

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

A nice looking space shipyard (Big L core) with a lot of lights!! perfect for ship building in space. The bridge on the side are for u voxel liberies u can get to them realy fast with elevators on the ground. If u have any questions ask me on discord Jasper_1. Are u looking for space stations space hangars space factory look no further!! and dm Jasper_1 discount if u buy more: 2 for 12 mil 3 for 15 mill 4 for 20 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Simple' version, a lower cost entry into the Omnifactory with minimal industry elements required to deploy. This does mean expanding capacity is a little more involved than the up-coming 'Expanded' version, requiring each new industry machine to be linked to each component storage directly. However, the layout configuration and open structure allow this to be accomplished with minimal effort. BP dispenser is set up inside the Omnifactory for a extremely reasonable price of 25Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

PYRAMID STORAGE ROOM: DONT WANT TO LINE UP 100 CONTAINERS? DONT WANT TO MESS WITH SCREEN LUA? THIS MIGHT BE THE THING FOR YOU! 100 L CONTAINERS PERFECTLY STACKED AND LINKED IN STACKS OF 10 TO HUBS WITH CONTAINER MONITOR LUA. ONLY 1MIL QUANTA ENJOY!

Does your organization/guild have frequent requests for random batches of voxels? Do you find it time-consuming to process all of these orders manually? Enter the Vox in a Box! This is an M-core deployable factory that your org can use to make any kind of voxel, of any tier, whenever they want, independent of the member's talents and without involving Legates or factory managers. Members just place the order with the ordering terminal at their own convenience, return a few minutes later, and collect their voxels in the output bin. Delivers with L5 industry talents. Want to limit the factory usage to just guild members? Want to limit the maximum size of the orders? Or disable one or more tiers entirely? No problem - You have control over the orders placed. Please inquire with any questions! (This version is better suited to guild requests; a larger version for volume industry sales is scheduled for release later) Thanks! GwennieAerlin (in DU) / gwennie_aerlynn#0 (on Discord) Pink Flamingo Industries / Shadow Union Available on Alioth at: ::pos{0,2,45.8947,92.0805,15.8965} VR Pod name: "Shadow Union Alioth Showroom" (Don't buy in VR!) Setup instructions/parts list: http://shadowpublic.kitsune.cc

Pyramid mega container factory: Makes every size container xs s m l xl xle makes every size ammo container xs s m l makes two of each size at a time all machines labeled to make schematic placement a breeze schematic lists for all our M core factories can be found on our discord like all our factories comes with in game and discord support

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

The X50 is the big brother of the X40. It is uppgraded with a L container and 8 L MU´s, you can mine all that you need. And with the X50 there are coming a an uppgrade that will blow you mind so keep an eye out on this one!