Dual Universe Creators

PYRAMID STORAGE ROOM: DONT WANT TO LINE UP 100 CONTAINERS? DONT WANT TO MESS WITH SCREEN LUA? THIS MIGHT BE THE THING FOR YOU! 100 L CONTAINERS PERFECTLY STACKED AND LINKED IN STACKS OF 10 TO HUBS WITH CONTAINER MONITOR LUA. ONLY 1MIL QUANTA ENJOY!

Medium core variant of the Deluxe pads at the store location they use the same type of voxels the ones that where built where in a different color to show the flexability of the pads as far as matching whatever you want to use them for. The pads in the pictures are a grouping of 6 pads set to a center 7th core that a customer wanted. Enjoy!!! p.s. bottom stem can be deleted if not wanted so just the walkway and pad underneath up to you! VR ADMI temporary store to get location and dont buy in vr.

Mining Outpost with independent fuel production. VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A1 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura X8 Pro is our most ambitious rig yet! All the features of the X8 with a new look and larger landing pad. M Core design for extending the landing pad even more if needed. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

L core Modular Space station with a Atlas L core Elevator docking cradle (it can dock other elevators with small modification) , you can easily expand the station with additional modules like the SKY Aegis SPC Dual PAD Visit at VR: SKY Aegis SPC Core Atlas Blueprints available at Alioth: ::pos{0,2,54.7335,109.8047,69.0288}

VR "VO Factory Sales" Materials cost on the market was about 6 mil. The cost of BP is $6 mil and that includes me deploying it. You can supply materials and i supply BP and deployment and you just pay me $6mil or i supply everything and you pay $12 mil. The price includes x3) Basic Containers L per section (x9 total). THIS Does Not Include Mining Units. Tri Hex Mining Structure allows you to mine from 3 hexes in 1 building. Equipped with a Surrogate Pod, VR and Motion for container hub. Has Landing pad design ontop with elevator access to main floor. Set up to x8 MUs on each section and room for more if needed. Has Hideaways for up to 10 L containers for each section. I do not have a setup to show anyone step by step. I have this set for token deployment only due to the hard to get ppl to understand the setup. I can place it way faster than the time to walk anyone thru the process.

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

The X50 is the big brother of the X40. It is uppgraded with a L container and 8 L MU´s, you can mine all that you need. And with the X50 there are coming a an uppgrade that will blow you mind so keep an eye out on this one!

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

- A large core outpost building, with landing pad for medium core sized ships. - A platform to set up your mining operation on 3 adjacent territories, for convenient access to mining units and storage from a single location. - Storage: 6 Basic Containes L (2 per territory totalling 384 kl when fully buffed, more can be added) - Placement space for 12 mining units (4 per territory) 3 blueprints are provided - one for the main large core building, and two additional small core constructs that integrate to the main building. It is important and strongly advised that you refer to the Deploy Setup Manual, as precise deployment of the 3 BPs is essential to enable miners working properly on the 3 territories. Get the manual here: https://drive.google.com/file/d/1VQ1bRl1KgdTca1cO-hZctLboFwJC_NwA/view?usp=sharing Material list: https://docs.google.com/spreadsheets/d/1fYWNOhXSlhMM0Ky4PHIrxpxwJlIues0a5YV4HOhcObg/edit?usp=sharing VR: DSPI Outpost Sales dispenser: ::pos{0,2,41.7116,89.5775,34.7921}

A simple Mine site with a Large container and 4 MU, a screen and a keyboard. Token is a full package that you can deploy where you want. Version exist without Script.