Dual Universe Creators

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

Roads for the ADMI Deluxe Pads easy to place and easy to change colors for! Location is the same ::pos{0,2,-24.6313,16.7490,95.7777} as the pads and vr.

A nice looking space shipyard (Big L core) with a lot of lights!! perfect for ship building in space. The bridge on the side are for u voxel liberies u can get to them realy fast with elevators on the ground. If u have any questions ask me on discord Jasper_1. Are u looking for space stations space hangars space factory look no further!! and dm Jasper_1 discount if u buy more: 2 for 12 mil 3 for 15 mill 4 for 20 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

As the Rock Raiders continued their expanse they started finding, stealing, and then revamping UEF designs. One of their hauls was a sub orbital platform. Given their ingenuity they were able to drop off a haul of T1 ore and have it automatically processed into Nitron and Kergon X5 at the same time. The only maintenance to this system is the occasional purge of oxygen and hydrogen once in a while while there to fuel up Rock Raider ships. Features: - 300KL of storage for Fuel & Ore - 150KL of storage for Pure T1 & Oxy/Hydro - Remote control and Status & Inventory checks. (VR) - Remote ability to move Raw Ore from Parcel to Processing Storage - Shipments of ore by contract haulers. (Parcel XL) - Higher Tier Ore shipments down to surface market to sell (Parcel XL) Top Hub: Ore & Fuel Access Bottom Hub: Pure T1 & storage Oxy/Hydro for purging.

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

50% off blueprint price at the moment on dispenser Loadeds industries presents large core space station with landing pad and open hangar space, blue print dispensor can be found at my base location, any questions please dm me on discord

This mining platform was designed to mine up to 4 ore types using L mining units. While the mining platform will default to one mining unit per T1 ore, this can easily be changed to mine different ore with upgraded mining units. To expand the number of mining units, just link to the additional units to the mining PB and to one of the containers. To modify the ore type, rename the container element and replace the ore with the new ores full name. Adding/modifying the mining units or containers will require the programing boards to be restarted. This is an early release version of the platform, so some of the items have been reduced or removed due to availability or cost. To further save on deployment cost, you can change the honeycomb type to fit your available ore type.

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

The Terrans are at it again. With the Terran Offworld mining OP, (OmO), you will get a plattform with a custom LUA script. Were you will know how mutch money your tiles cost you a week/12 weeks by adding the quanta they cost. So that means that you have controll on the tile cost out in the cosmos. There are room for 7 L MU´s AND a small manufactering capability, like fuels och convert the ore directly to pures and so on. And the best part is that there are 8 L containers for the ore your gathering, and 1 L container for fuel storage and 2 L containers for other storage. With this large amount of L containers you will not need to travel that often to empty out the ore.

50% off blueprint price at the moment on dispenser This large landing area covers the floor space of a Large static core its a must visit you can visit in vr search: loaded industries showroom and head across the runway to check it out, heres also a quick video link https://www.youtube.com/watch?v=SrIdpuqcb9s

The Terran X40 MP is a mining plattform for new players. An easy plattform to build and maintain. And easy to check the miners if and when they need to be calibrated. The X40 has 8 basic mining units S. And a M basic container for the ore to store in. This means you can craft the most of the blueprint in your nanopack. Glory to the Terran Empire

In the process of moving, blueprints are available to Kosmos Exchange. Space!!!! It's got electrolytes. It's time to upgrade from that voxel thick landing pad with containers strewn about? You'd like some style? You like furniture from Ikea? Look no further, I've got you covered with the new modular series of stations offering you usability and looks in one package. This station features ample landing and hangars for XS-M size ships. A big pass-through hangar for building or parking up to M core ships, 3 XS core hangars and 3 wide XS-S hangars. In addition, there is a ton of storage space, about 2 M cores worth of factory space, and plenty of space for you to customize living spaces. With the new blueprint snap, adding additional modules (coming soon) will be a breeze and seamless to help make your space experience more immersive. All future modules will have connection points with transition stairs or walkways to make moving between cores easy. Moving to space starts here See it in VR at "Czar in Space Showroom" Dispensers are there too

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

A mining rig with style - instead of floating mining units everywhere. Space for eight mining units + L container. Mining unit output accessible via elevator to basement area. Mining units not included in BP - place them separately. VR: Deeh Store (dispenser inside the building, 2nd floor next to elevator; turn left when entering 2nd floor via stairs) If you have questions, don't be shy - contact me on Discord!