Dual Universe Creators

For reference, please also see "Anisoptera v1" on this website (the previous version, internal code name: "Poor Man's Speedboat"). The Anisoptera V2 (internal code name: "Businessman's Speedboat") is the latest version of this famous dragonfly-alike designer speedboat. The original designs called for a fast boat that could fit many different types of ship hangars, thus the resulting conceot was that of a very slender ship hull. That in return resulted in a low drag amount and therefore high possible speeds if powered asequatly. The version 2 has the following improvements over V1: - on-board storage (1,000 l) - even higher speed - longer flight duration - slightly increased wing lift capacity - more airbrake power - more forward engine braking power - more fuel capacity - easier access to fuel tanks And the best is: from the outside there is almost no difference! NOTICE All versions avalable: - NEW! Anisoptera v3 (suborbital superspeeder one-seater) - NEW! Anisoptera v3 (suborbital superspeeder two-seater) - Anisoptera v2 (atmospheric speeder one-seater, THIS version) - Anisoptera v1 (atmospheric speeder one-seater, Poor Man's edition) AVAILABLLE NOW FOR A LIMITED TIME ON "Tropico" (VR), ALIOTH

The Eclipse Large Core Hauler - 7680KL Cargo Capacity 25+ KT Cargo off Alioth with 45.5 G's of atmo brake power (so that you can land that heavy load easily) Come see us in person at Captain’s showroom 12km Southwest of Alioth Market 16 ::pos{0,2,19.3636,110.1164,13.5872} or visit Captain’s Customs Ship Showroom in VR Ask about token prices! Markets are changing fast.

Use this ship for those quick market runs or helping a buddy on the other side of the planet repair their broken ship. I personally use it going between Alioth and Haven using the shuttle and transporting ore using my nanopack. If you want something that's simply a blast to fly around the atmosphere, look no further. Its quick and agile motion makes it one of the most enjoyable ships I've ever taken to the skies. - High Speed (no talents) (1100km/h) - High Maneuverability - Pocketable - Extra, Extra Small - Razor thin Wings Tokens will be available after the factory is operational. Different colors will be available after the factory operational.

BP dispenser located on Haven at - ::pos{0,27,6.9482,-70.8985,249.7016} To view in person, visit VR: "TobiwanKenobi Showroom" The Beltalowda is an optimized space-only roid runner, built for cheapness, speed, and endurance. Unburdened by the useless mass of atmo elements, it has a solid ~7g of space thrust and a max speed of about 39,000kmh, which lets it race to asteroids quickly to beat the competition. It comes with only two M containers inside, but there are eight racks on the exterior to attach extra containers - giving it a storage volume of up to 1.7ML. These racks are also a good place to attach other elements, such as a shield. The DSAT is built into the BP, but it's easy to remove and reinsert at will with an indicator for precise placement. There's also a slot for a warp drive at the tail of the ship, but it's optional. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NOTES: • The Beltalowda comes with a DRM-free BP of a XS space station so that you can have a place to park the ship when not in use. You'll need another atmo-capable ship to haul the ore down to dirt. • For obvious reasons, don't spawn the Beltalowda in atmosphere. First place a XS space platform or two, then spawn the ship. The platform is DRM free, so you can make a core BP of it after spawning to make more of them. • If you want to convert the Beltalowda into a regular hauler, just remove the DSAT and replace it with 6 L containers, for a total of up to 14 L containers(2.7ML). Recommended max cargo mass is 2000t to keep the thrust above 1g. Listed stats are with level 4 technician/piloting talents and basic elements.

A small, good looking and cheap XS Hauler for beginners and small loads. It is available on the Goas Ship Shop 9 km away from M6 ::pos{0,2,39.2300,104.6832,111.8387} or you can look at it in VR at Goas Ship Shop (don't buy in VR) All statements without guarantee

Borg Cube style Cube, yes! this beast is S-core build, but easily out-performs most M-core and even some L-core builds. It has 2x XL space engines and 12x L atmo engines, with bunch of wings. I did 7.5kt (7500 tons) with this beast and it held together just fine, low alt lift was barely enough, but i managed to get it to 3500m and hold it there just fine, landing can be rough if you dont have enough space, but land it like a plane! just be careful with arch, DO NOT press "G" to land, lower the altitude yourself, because arch does not consider your ship's weight, it will SLAM you into ground. best part is adjustors, it has perfect adjustor placement, because well .. it's a CUBE! it turns better than any other ship (not a joke) and center of mass is almost in center, maybe off by 2%. Container hub is also right in the center, so if you fill it with cargo, then center of mass will be exactly in center. comes with 10x L containers, but there's enough room inside for more stuff. it has basic interior to keep the weight down, but also so its easy to repair the elements in case you damage them. So in atmo it does 7.5kt (including ship's weight), but you can put more hovers on it or replace hovers for vboosters and put more wings on it and i think it will handle 9-10kt in atmo, however i doubt it lifts more than 5kt into space, might get 6kt if you know how to fly, but you might end up taking some heat damage. you can further modify it by adding downwards space engines and it should easily get 6kt into space. This truly is the most powerful S-core ship i have built or seen and it has room for improvements, i just don't like to build ships with too many elements as they start lagging real bad :(

You want to travel in style? Get to your destination rapidly? look no further. The Seraphim is an S core made to be a sporty warp courier and daily driver, beautiful interior, handling like a bird and with enough cargo space to enable you to make good market purchases. The ship has a max speed of 1534 km/h and can withstand the pressure of the atmosphere at high speed without taking significant damage at 1200 km/h. The cargo space will enable you to get out of Alioth atmosphere easily with at least 400t of cargo. You want to see the Seraphim in action? check this review made by RobRantz here: https://youtu.be/8LXz3C8cNwM Come visit us in VR at Paragon Hex Showroom or in person near market 6 at ::pos{0,2,35.3441,107.0564,-13.1840} DM if you have any questions on discord: vork

::pos{0,0,-2364053.1173,527100.5878,101017.6246}

This is the FLYING VERSION with Swoop Garage - *STATIC MODEL available here: https://du-creators.org/makers/MrLightWell/ship/Mos%20Eisley%20Cantina During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. I didn't want static limitations for my next creation: the infamous cantina from Star Wars: Episode 4. I'd make a mobile version, and remembered the various mentions of 'Swoop Racing' from the years of playing games, reading extra lore, etc. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. You can come enjoy 'Lightwells Mos Eisley Cantina' in VR anytime, (Or pick up a copy of your very own!) it and many other builds at LSA INDUSTRIES have been made for the enjoyment of the DU community, Cheers everyone! *Images show the 'bury test' from beta - one consideration people may want to remember is that the unique advantage of DU's terrain allows for realistic application of sand or whatever over top of the build, especially the dynamic version shown in the test- you can effectively bury the flying version, and hollow out a small entrance for the garage. Just one more option for those who may want to dig it out and fly it again in the future.

The Inquisitor MK1-C is the cannon variant of the Inquisitor MK1-R. It is a stylish and affordable S core part of the Confessor series. The ship comes equipped with 2 remote controllers. You can choose which one to activate depending on your situation: - One has ArchHUD installed when you want to autopilot to your destination - The other comes with Deadrank PVP script for when you get into combat and the PvP zone. You can also swap the M shield for an S and add 2 M container if you want to use the ship as a roid runner. GENERAL INFORMATION - Space ship only - S core - 6 Advanced precision cannon S - 1 advanced space phased-array radar - 1 space radar - 4 advanced freight engine L - 1 Advanced Shield Generator M - 1 M space fuel tank STATS (with level 5 talents) - Thrust: 18.6G - Brake force: 19.7G - Max speed: 44 816 km/h - Delta V: 748 956 km/h CROSS SECTION - Vertical: 304 m2 - Frontal: 65.1 m2 - Lateral: 164 m2 If you need a boost for the ship when you deploy it, contact me and we can set up a time so I can come boost it. Come visit us in VR at Paragon Hex Showroom (Ship is in display at the 2nd level of the complex) or in person near market 6 at ::pos{0,2,35.3441,107.0564,-13.1840} DM if you have any questions on discord: vork

Ask me about Token price as the market prices keep changing! The BFF-1 is an updated StarWars freighter replica. It is a space only hauler with 20L containers and 2 XL and 2 L rear engines. It has room for 4 XL's in the rear if you remove the Ls. It has rear propulsion in the form of 4 M space engines. It is outfit on the inside with a bar, sports room, meeting HQ and 2 container rooms. Come see us at ::pos{0,0,-313293.9187,978937.8481,-453302.0252} OR Visit us in VR, Search for "SF1 Showroom". To enter the ship run under the belly to find the door, then use the elevator to get to the main floor. I will place the ship for you if you bring me the parts and the blueprint. I have level 4 placement skills in everything and 5 in a few. I will be at full 5's in February. Feel free to stop back by for handling increases!