Dual Universe Creators

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

Sick of building in the dark? Our Work Shop is fully Illuminated for any time of the day building. Stop by on Alioth and take a look. Dispensers on site,

This makes all size Advanced Optimized Containers EXXL - x2 every 7 days 9 hours XL - x2 every 3 day 16 hours L- x1 every 44 hours M- x1 every 22 hours S- x5 every 24 hours XS- x8 every 24 hours Our factories are as friendly user as we can make them. Everything is labeled for easy start up. All factories are setup to drop in raw ore and let it do the work!! Other than putting in schematics which everything is also labeled to let you know what units require what schematics!! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

Designed by AtmoCorp, a subsidiary of Infinity Corporation. The AtmoCorp T2 Outpost is the next step up from your Starter outpost. Designed to be deployed on any terrain, the T2 Outpost comes with a personal landing pad, two floors of living space, and an outdoor terrace and jacuzzi. With a Container Hub and up to ten large containers pre-installed, with T5 talents included it has a storage capacity of 1920kl. *NEW updated version includes four Basic Mining Units and a rack to hold them. If you don't plan on mining, it can be deleted. The Outpost is built on the top half of a Medium Core. It can be placed with the lower door at ground level, with half the core below the ground to allow for an underground factory. Or the core can be raised up as high as you want, and the lower door and support structure can be copy and pasted to extend it to the ground. Blueprint for sale for 5M 7km south of Market 7 ::pos{0,2,19.3915,97.2582,147.7494} Or in VR search for "AtmoCorp Alioth" DM [IC]Atmosph3rik#6658 on DISCORD with any questions.

Container Cover DRM free available in "Hagbards Marina" ::pos{0,2,38.3245,62.6634,4.6699} VR: "Hagbards Marina" it comes with a recolor kit, so you can easy paint it the way you want it please find the parts/Materials List in the picture gallery. Important notice: some of the Voxels are in Offset, i have placed some adjustors xs as handles, to make it easier to grab them.

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

A landing pad on L core. Built on top of core, with a bit of margin so you can still place biggest elements and / or build a bit, and expand underground. Easy to place with its big pillars Can be seen on VR: Aerogics L Core Landing Pad *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Yellow Plastic: lines on landing area Luminescent White Glass: inside lights Luminescent Yellow Glass: outside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Vortex Geometry has developed a mining platform. The platform is called "DREDGER" and is very easy to operate and has an awesome futuristic look and feel. The container is located at the top of the structure, a hub container is connected to it, for convenient access to the ore at the level of the character's height. By the same principle, the mining units themselves. The platform is designed for 4 L Mining Units ____________________________________________________________________________________________________ NOTICE!!! * Blueprints what we are sold it is non core blueprints. ** When ordering more than one BP, you get a discount 15%(BP). If you have any questions, or want make order - please contact me on the discord.

Designed to be an entry for the NQ Build Your Legacy contest. Feature an all-in-one outpost for a good start and a safe place on heaven.

PYRAMID SELF-REPLICATOR THE PYRAMID CO. SELF-REPLICATOR is an M core factory, a real monster that makes every type of basic and uncommon industry units. All assembly line sizes, and transfer units. It can produce about 20 uncommon units and 30 basic units a day! Simultaneously! and 16 transfer units a day. Easily add, or upgrade with all the sub components available from this factory. Like all our factories, this beast has everything labeled, making it easy to go around and take items for nano crafting. The list of nano craftable parts this thing produces is too long to list, and I keep finding more! Be sure to pick up a Container factory and Screen factory to complete the set and be on the path to creating everything you will ever need to build factories and industry!! We also have an assembly line factory coming soon to make additional elements from all the components faster than nano crafting. So come on by and check out DU's biggest factory BP supplier!! READ OUR BIO FOR MORE INFO

Mining Outpost with independent fuel production. VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

BP dispenser located on Alioth at ---> ::pos{0,2,24.6416,120.5044,3.8850} That building is in an L Core. I don't like the huge factory blocks at all, so I took an L Core and gave myself free rein in the dimensions and design of the building. From my point of view, the entire core does not always have to be used. It is important to me that buildings fit in well with their surroundings, be it in the city or in the country. The building is an empty shell! Setting up the factory or your office in the building is entirely up to you. Below the asphalt there is enough space for you to build your own cellar with containers and industry. you can find the core in the center below the floor if you have any questions or suggestions for improvement, please let me know! VR: "Calpone Showroom" dispenser ---> ::pos{0,2,24.6416,120.5044,3.8850}

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Simple' version, a lower cost entry into the Omnifactory with minimal industry elements required to deploy. This does mean expanding capacity is a little more involved than the up-coming 'Expanded' version, requiring each new industry machine to be linked to each component storage directly. However, the layout configuration and open structure allow this to be accomplished with minimal effort. BP dispenser is set up inside the Omnifactory for a extremely reasonable price of 25Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

In the process of moving, blueprints are available to Kosmos Exchange. What we have here is the brand-new warp cell factory from Czars Workshop. Making up to 280ish cells a day, this is the perfect addition to any of my modular space stations or space landing pads. Let Czar help you live in space! See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}