Dual Universe Creators

This M Core Factory Shell will fit Tier 1-3 ore refiners and product plus assembly lines. Fits 1 XL Assembly lines. 1 basic or 1 uncommon. Plus a mix of any lines you want. Makes organizing your production easy. Room for all your containers in the ceiling. BP Requires M Core 1 Basic container XS (schematic container) 1 Detection Zone M 4 Elevator XS 1 Relay XS 2 Screen XS 2 Sliding Door M You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000} 6 Square Light M 6 Square Light S 9 Vertical Light M 7 Vertical Light XS 4 Window M

VR "VO Factory Sales" We are also located at the Alioth Exchange in the Red Isle This makes all size Basic Containers. Everything is labeled with a maintain setting for really easy to setup from bp. I highly recommend letting factory run for 24 hours before starting the assembly lines for containers. 24 hour production rate with no talents that is if you set all machines to run. (The assembly lines that produce the containers do not have a maintain number set on them because i feel its up to the customer to set them as they desire) EXL - 3.75 XL - 7.5 L - 15 M - 30 S - 60 XS - 240 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

Hadron Mining Platform 4 Designed around our signature Hadron theme, the Mining Platform 4 delivers style and function to any outpost or mining operation. Comes equipped with 1x M Basic Containers and each mining unit housing includes markers for quick and easy placement. The centralized VR station provides instant access to all mining units on the platform without the need to move from the spot. When deploying the platform, make sure the stairs and the voxel square at the bottom of the platform are above the surface of the terrain. This will ensure you have access to the container if you choose to swap it out. The raised platform and circular arrangement of the mining units allow the bonus ore to spawn in a ring around the construct allowing for ease of access when collecting.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Can produce atmo & space fuel and several honeycomb materials, depending on ore provided: Brick, Carbon Fiber, Wood Plastic, Steel, Silumin Aluminium, Iron, Silicon, Carbon 4 Hubs for storage: Ore (input) Refined Materials Products Fuel & Honeycombs (output) Storage: 4x Container M on blueprint to make it easier to spawn, can go up to 6x container L total Best used on a tile with all t1 ore and one t2: with mining units it will auto produce both fuels & all T1 honeycombs Comes with several Aerogics scripts configured plus the excellent Jericho Industry HUD https://github.com/Jericho1060/DU-Industry-HUD Screens on every machine to help with first run configuration, it won't take more than a couple of minutes to have your own refinery running!

Note: Some furnishings in this blueprint require the Art Deco (Silver Backer Rewards) Features: 600kl of storage Once a simple house for servants at the Ivory Island Resort. After new management took over servants were evicted and the housing upgraded to include luxury amenities, staff now commute to work from the mainland. This house includes a new custom art piece that is AI Generated through the use of variables and prompts. Furnishings also include Art Deco pieces from old Earth, that are limited to the most affluent of clients. (Tokens will not be made available)

makes all the basic elements and XL uncommon space engines ,vr MAGIC ELEMENTS FACTORY . location: ::pos{0,2,40.7473,91.6040,93.7875}

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got all that and the chips! L Core Space Factory shell. Lots of space to make your factory look pretty cool. Getting tired of stacking machines your machines on voxel landing pads? Well stop doing that and factory in style. Tons of hidden storage space. Easily see your machines, lay it out as you like. Center command platform with multiple levels and even decorative hangers (hydroponics look is my set up). Modular set up makes it easy to set up with additional modules including hangars, landing pads, storage modules, elevator modules and more. Come see it in VR at "Czar in Space Showroom" or directly "Czars Space Factory" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155} (Please note that VR and in person is an active factory and may have changes made that are not included in the blueprint, please ask if you have any questions)

50% off blueprint price at the moment on dispenser Loadeds industries presents large core space station with landing pad and open hangar space, blue print dispensor can be found at my base location, any questions please dm me on discord

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

Welcome to DarkWarp. A S-core warpcell´s factrory. Used by the Terran Empire. If you can fuel the little monster, it gives 16 WC/H. An awesome small factory for personal use, but also for selling warpcells, it will give you aprox. 380 WC/day. And thats more that enoght to earn some quanta. Come on by VR: Dark Forges HQ to check it out.

Designed to be an entry for the NQ Build Your Legacy contest. Feature an all-in-one outpost for a good start and a safe place on heaven.

This is my entry for the 'Build Your Legacy' competition and while I think it fits the requirements I do not like it as much as the speeder I submitted. I think it is mainly due to the colours as I have not built with Tier 1 ore (Except concrete) for a long time so I only really had the colours provided to work with. It does feature a pad for parking your speeder underneath the structure. My favourite aspect of this design was the stands I setup for the mining units.