Dual Universe Creators

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

Cool looking L sized Landing pad for AGG platforms, it has a decorational pulsor on the bottom and has at least 3 voxel layers. The pad was designed to be a "standalone" placing them close together will need a lot of work... PS: dont mind the voxel LOD artifacts in the photo's, the pad is nice and clean Come take a look at it, VR: Markii's showroom

MK logo. 184x184 voxels/46x46 meters VR: The Syndicate Shop BP can be purchased on Alioth near market 6. ::pos{0,2,31.6129,108.1439,2.4078}

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

Ikara Industries presents the "Ikara Landing Pad KIT T1 (DRM Free)". You have a nice ship but you don't want to land on earth. Then the Ikara Landing Pad KIT T1 is just what you need. The landing pad kit includes - DRM Free - Staircase to the landing pad - 2 different designs - Recess for two screens Placement rules: Hold SHIFT, If you set the modules. What else you should know: Examples: Building a S Core version 4 x Modules Variant 1 Building a M Core version (one side) 4 x Module Variant 1 (4 voxels remain, just move the panels by 2 voxels in each direction) to Buy, Questions? - Message @Ikara2184#2629 on discord.

drm free VR: "Alioth Marina"

M core with landing area on top Identical to the other M landing pad module but without interiors (uses less honeycombs) 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Purple Plastic: replace with color of your choice when customizing 3.5k alu 700 plastic 200 iron 100 carbon fiber / steel

In the process of moving, blueprints are available to Kosmos Exchange. Next up in modular factories is Czars Space Fuel Factory. Making Nitron and up to 2 styles of Kergon. Add it onto one of my Space BigLandyPaddys for full autonomy in space. Command center with Jerichos Storage LUA and My Hub screens. See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

This is a modular showroom allowing you to make it your own - Each panel is available at the corners in the showroom so you can change up the outside as you see fit. There are 4 pads on the edges to show off 4 S/XS cores and plenty of space in the middle to show off an M core. Hallways underneath are leveraging the "DF Firestorm Hallways & Decor" voxel library which is also for sale (voxel library is DRM Free!!). How to find: - VR - Search for "DSI Dark Forge HQ" (do NOT buy a BP in VR!!) - ::pos{0,2,21.9994,107.1816,6.5935} - Dispenser is in front of the building, near Alioth DM7 Cronus#2214 or Firestorm#4004 on Discord if you have any questions!

In the process of moving, blueprints are available to Kosmos Exchange. Get into space quickly and easily with this S core space station. Whether you're new and want to give space a try or a veteran needing to set up a refueling/storage station in orbit, this is for you. Plenty of storage space, room for some industry, clean control center/small hangar and landing on top. Need More landing space? Add on landing pads available. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

XDM tower is a 3 L core tall stack, 258m tall to the roof, and 333m to the very tip. Featured in the outpost museum. Contact: Actimist#4020 Primary designer: MadManWithABlueBox Contributors: Sinjin Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

This is my entry for the 'Build Your Legacy' competition and while I think it fits the requirements I do not like it as much as the speeder I submitted. I think it is mainly due to the colours as I have not built with Tier 1 ore (Except concrete) for a long time so I only really had the colours provided to work with. It does feature a pad for parking your speeder underneath the structure. My favourite aspect of this design was the stands I setup for the mining units.

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Step up your mining ops with a Thumper Mining Laser from Dumboiz United. This S-Core mining unit is here to do some work! 4 mining units converge at a singular point, making gathering your surface harvest easier than ever! One large container is neatly stored up top, with a VR platform and container hub placed conveniently at the ground level. The core itself sits on the floor of the build box, making placement easy, and cleanup a breeze. Quit wasting time at your mining units! Calibrate 3/4 of your mining units from one spot, harvest all of the surface ore from one spot, and find your mining station from from a kilometer away with the scale and light emitted from this laser! Everyone has a platform, now. Everyone's going to have a Thumper. (Currently equipped with Basic Mining Units -- if you want to upgrade your laser, message isyron#4015, bring 4 upgraded units, and he'll do the swap and give you the BP!)

Here it is! The Kombat Extendable Mining Rig, Landing and Launch Pad system. Build with the custom, patented landing deck. This one does not use fussy zero-G technology but relies instead on trusty steel and concrete to keep everything upright. On deployment you can chose your own building material honeycombs (Primary, Contrast, Metal and Lumi). Comes in four flavours with each it's own distinct role: Barrier - (Bp: 0.9M Token: 2.7M) The basic variant is used as a simple but elegant landing platform that allows any M-core or smaller ship to land safely on it. Guided by landing lights and having a nice elevator down to the ground. Corsar* - (Bp: 1.8M Token: 3.6M) This one comes with a hole in the top! But in that hole fits a Medusa Y-Lift capable of lifting around 600tons on Alioth and up to 2Kt on places like Madis without talents. It comes with a nice ramp that allows you to walk up right to the Elevator seat. Kombat - (Bp: 1.8M Token: 3.9M) Ah, the trusty workhorse of the lot. Why not have you landing pad AND do three tile mining all from the same spot? Comes with 3x basic and 1x uncommon mining units but can be extended or swapped out to any configuration. Comes with all the luxuries of both the Barrier and the Corsar but also spots an Large Container to hold all your ore. Can be deployed to service 1, 2 or 3 adjacent tiles from one location. Stugna* (Bp: 2.4M Token: 4.9M) The big boss. Why not combine EVERYTHING? Have a decent landing pad, a launch pad for your elevator AND have access to three mining rigs all at the same time? Place one of these in the middle of a super-flower, add a few containers and do your weekly mining run with your pocket-speeder, dumping all ores straight into the elevator storage, ready for lift-off. Why spend any more time on dusty rocks while you could be sipping a Pan-Galactic Gargle-Blaster back at home and let the Kombat Rig do it's work? * Comes without the Medusae S-Core Elevator that fits the exact dimension. Can be bought separately (Bp: 17M Token: 24.5M). In order to dock in space we highly recommend the Bogdan Space Dock L-core landing (Bp: 3.8M Token: 15.8M). This doubles as an L-core space landing pad and space station. As nice as pictures are, a visit is worth more than 1000 of them. VR over to SVEA Elevator Showroom and cross it to the North, can't miss it. The Bogdan can be viewed at VR: NSS MADIS VR (this one is being developed right now) Please discuss order and installation. I want to do a first installment myself and discuss all the details, then hand over extra blueprints when needed.