Dual Universe Creators

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got less lag! Sometimes, you just need a big space to set up storage or your own customizable factory layout. I got you. Big wide open modular with tons of space inside. Containers, sure. Factory, sure, dead noveans from your pvp conquests...sure. I'm using mine as a nice place to store my voxel libraries so they're not just out in the open cluttering all my pretty space views. Big L size space on top for landing too. Come see it in VR at "Czar in Space Showroom" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155}

We Create Voxels presents "Diglett" - a voxelised rendition inspired from the original Pokemon series. Available in both Static and Dynamic blueprints, Diglett is a hollow hull and makes the perfect mining outpost for Pokemon fans. Available for purchase at: ::pos{0,2,36.9091,101.8558,144.5942}

This Is a Ore to Fuel Refinery. Makes all Fuel types (One fuel per core) 20 Refiners. 10 Chemical Industry. 14 Expanded Container XXL. Transfer units very on fuel type. Concrete can be replaced with brick for almost same effect.

PYRAMID SCREEN FACTORY: Tired of paying 8k for an XS screen? We were too. So here it is, a screen manufacturing beast. This factory can make a literal ton of screens a day. with 10 assembly lines, this factory is capable of making xs,s,m screens and xs,s,m,l transparent screens. all 10 assembly lines can produce screens of your choosing since they all use the same parts. Just put whatever sized screen schematic you want in any of the assembly lines. they can run one of each type or all of the same type. makes well over 1000 screens per day! XL screen factory coming soon! READ OUR BIO FOR MORE INFO

M-Core factory shell.

Ikara Industries presents the "Ikara Landing Pad KIT T1 (DRM Free)". You have a nice ship but you don't want to land on earth. Then the Ikara Landing Pad KIT T1 is just what you need. The landing pad kit includes - DRM Free - Staircase to the landing pad - 2 different designs - Recess for two screens Placement rules: Hold SHIFT, If you set the modules. What else you should know: Examples: Building a S Core version 4 x Modules Variant 1 Building a M Core version (one side) 4 x Module Variant 1 (4 voxels remain, just move the panels by 2 voxels in each direction) to Buy, Questions? - Message @Ikara2184#2629 on discord.

Moved to Alioth, 7km north of Market 6. ::pos{0,2,39.2832,101.0451,299.8752} VR to "Pagoda".

Here it is! The Kombat Extendable Mining Rig, Landing and Launch Pad system. Build with the custom, patented landing deck. This one does not use fussy zero-G technology but relies instead on trusty steel and concrete to keep everything upright. On deployment you can chose your own building material honeycombs (Primary, Contrast, Metal and Lumi). Comes in four flavours with each it's own distinct role: Barrier - (Bp: 0.9M Token: 2.7M) The basic variant is used as a simple but elegant landing platform that allows any M-core or smaller ship to land safely on it. Guided by landing lights and having a nice elevator down to the ground. Corsar* - (Bp: 1.8M Token: 3.6M) This one comes with a hole in the top! But in that hole fits a Medusa Y-Lift capable of lifting around 600tons on Alioth and up to 2Kt on places like Madis without talents. It comes with a nice ramp that allows you to walk up right to the Elevator seat. Kombat - (Bp: 1.8M Token: 3.9M) Ah, the trusty workhorse of the lot. Why not have you landing pad AND do three tile mining all from the same spot? Comes with 3x basic and 1x uncommon mining units but can be extended or swapped out to any configuration. Comes with all the luxuries of both the Barrier and the Corsar but also spots an Large Container to hold all your ore. Can be deployed to service 1, 2 or 3 adjacent tiles from one location. Stugna* (Bp: 2.4M Token: 4.9M) The big boss. Why not combine EVERYTHING? Have a decent landing pad, a launch pad for your elevator AND have access to three mining rigs all at the same time? Place one of these in the middle of a super-flower, add a few containers and do your weekly mining run with your pocket-speeder, dumping all ores straight into the elevator storage, ready for lift-off. Why spend any more time on dusty rocks while you could be sipping a Pan-Galactic Gargle-Blaster back at home and let the Kombat Rig do it's work? * Comes without the Medusae S-Core Elevator that fits the exact dimension. Can be bought separately (Bp: 17M Token: 24.5M). In order to dock in space we highly recommend the Bogdan Space Dock L-core landing (Bp: 3.8M Token: 15.8M). This doubles as an L-core space landing pad and space station. As nice as pictures are, a visit is worth more than 1000 of them. VR over to SVEA Elevator Showroom and cross it to the North, can't miss it. The Bogdan can be viewed at VR: NSS MADIS VR (this one is being developed right now) Please discuss order and installation. I want to do a first installment myself and discuss all the details, then hand over extra blueprints when needed.

The X50 is the big brother of the X40. It is uppgraded with a L container and 8 L MU´s, you can mine all that you need. And with the X50 there are coming a an uppgrade that will blow you mind so keep an eye out on this one!

This is a modular showroom allowing you to make it your own - Each panel is available at the corners in the showroom so you can change up the outside as you see fit. There are 4 pads on the edges to show off 4 S/XS cores and plenty of space in the middle to show off an M core. Hallways underneath are leveraging the "DF Firestorm Hallways & Decor" voxel library which is also for sale (voxel library is DRM Free!!). How to find: - VR - Search for "DSI Dark Forge HQ" (do NOT buy a BP in VR!!) - ::pos{0,2,21.9994,107.1816,6.5935} - Dispenser is in front of the building, near Alioth DM7 Cronus#2214 or Firestorm#4004 on Discord if you have any questions!

M core Outpost with T1 pure material production, fuel and honeycomb Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store XS Core size Elevator dock on top

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

Modern, spacious and affordable accommodation. The balcony style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony of the 2nd floor provides a great cover for several personal speeders, protecting against casual collisions and weather, should the environment be a little rough. Built on the lowest of the constructs grid structure, this spacious condo provides ample opportunity for further expansion upwards, should the new owners wish to add on a 3rd floor. With big windows and a front and back balcony, one can always enjoy spectacular views, while resting in comfort. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}