Dual Universe Creators

At daytime a fairly normal looking tower, but at night it seems to be burning. 5,000,000 quanta for a batch of 8 blueprint copies. Dispenser is in the penthouse underneath the landing pad in the top of the tower. Deploying strategy: 1. deploy the base core 2. deploy the North core, then the East, then the South and then the West core 3. deploy the first floor on the base core 4. deploy the second floor on the first floor 5. the second floor bp copy is DRM free so you can mulitply it to make your Lotus tower higher 6. deploy the top floor on the final second floor core NOTE! Possible problems: while connecting the North, East, South and West cores to the base core you may have to remove glass panels from the base (4 in the center) and then place them back when the core is placed. Check out the tower in VR: The Burning Lotus or visit at location: ::pos{0,2,40.7757,116.8397,0.0000} Have fun!

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

PYRAMID SELF-REPLICATOR THE PYRAMID CO. SELF-REPLICATOR is an M core factory, a real monster that makes every type of basic and uncommon industry units. All assembly line sizes, and transfer units. It can produce about 20 uncommon units and 30 basic units a day! Simultaneously! and 16 transfer units a day. Easily add, or upgrade with all the sub components available from this factory. Like all our factories, this beast has everything labeled, making it easy to go around and take items for nano crafting. The list of nano craftable parts this thing produces is too long to list, and I keep finding more! Be sure to pick up a Container factory and Screen factory to complete the set and be on the path to creating everything you will ever need to build factories and industry!! We also have an assembly line factory coming soon to make additional elements from all the components faster than nano crafting. So come on by and check out DU's biggest factory BP supplier!! READ OUR BIO FOR MORE INFO

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

L core Static Statue of a pretty Lady on the Beach for myDU 260k Marble voxel Full L core size. https://drive.google.com/drive/folders/1yCTheMroiOu6hF4MHFkQ50AvXtcQAoVl?usp=sharing

•The first and only Warp Cell Factory provided on the most compact of cores! (XS) •Blank design, customise its facade to match your environment! •Easy display & management system! •Every Element accessable without space wasting walkways! •*Provides up to 173 Warp Cells per 24 hours! • Use either Pures or Ores! Or a combination of both! • Available as Static or Space version! [UPDATED 2024] The bottom (Catalyst overflow) can be used as the Schematics Container, requiring no additional construction edits. [UPDATED 2023] No overlap - Future update ready! Optimised to hold 3 days production in Ores AND Pures! (over 300kl storage!) "SWARM Flotilla Shop" Surrogate Pad available for preview of working display! * Based on Talent application. Talent application and setup provided upon request for an additional 8,000,000ħ Contents: Basic 3D Printer 2 Basic Chemical Industry 2 Basic Electronics Industry 3 Basic Glass Furnace 6 Basic Recycler 2 Basic Refiner 7 Basic Smelter 2 Canopy Windshield flat M 4 Canopy Windshield flat S 8 Container Hub 7 Container M 2 Container S 11 Container XS 14 Long Light M 2 Manual Switch 2 Programming Board 2 Static Core Unit XS 1 Transfer Unit 1 Transparent Screen M 1 Transparent Screen XS 2 Uncommon 3D Printer 2 Uncommon Checmical Industry 1 Uncommon Electronics Industry 12 Uncommon Glass Furnace 8 Uncommon Refiner 3 Uncommon Smelter 1 Vertical Light S 5 Glavanized Dark Gray Aluminium 402 Schematics Required: (Cost of 35,407,939ħ) Al-Fe Alloy 1 Calcium Reinforced Copper 1 Cu-Ag Alloy 1 Glass 1 Advanced Glass 1 Ag-Li Reinforced Glass 1 Polycarbonate Plastic 1 Polycalcite Plastic 1 Polysulfide Plastic 1 Basic Component 1 Basic Connector 1 Uncommon Connector 1 Basic LED 1 Uncommon LED 1 Basic Antimatter Capsule 1 Uncommon Antimatter Capsule 1 Advanced Antimatter Capsule 2 Basic Quantum Core 1 Uncommon Quantum Core 1 Advanced Quantum Core 2 Advanced Antimatter Core 6 Advanced Quantum Alignment Unit 6 Warp Cell 5 Pure Hydrogen 1 Pure Oxygen 1 Pure Aluminium 1 Pure Carbon 1 Pure Iron 1 Pure Silicon 1 Pure Calcium 1 Pure Copper 1 Pure Sodium 1 Pure Lithium 1 Pure Silver 1 Pure Sulfur 1

This makes all size Advanced Optimized Containers EXXL - x2 every 7 days 9 hours XL - x2 every 3 day 16 hours L- x1 every 44 hours M- x1 every 22 hours S- x5 every 24 hours XS- x8 every 24 hours Our factories are as friendly user as we can make them. Everything is labeled for easy start up. All factories are setup to drop in raw ore and let it do the work!! Other than putting in schematics which everything is also labeled to let you know what units require what schematics!! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

A simple Mine site with a Large container and 4 MU, a screen and a keyboard. Token is a full package that you can deploy where you want. Version exist with Script to display MU Statistic on screen.

Does your organization/guild have frequent requests for random batches of voxels? Do you find it time-consuming to process all of these orders manually? Enter the Vox in a Box! This is an M-core deployable factory that your org can use to make any kind of voxel, of any tier, whenever they want, independent of the member's talents and without involving Legates or factory managers. Members just place the order with the ordering terminal at their own convenience, return a few minutes later, and collect their voxels in the output bin. Delivers with L5 industry talents. Want to limit the factory usage to just guild members? Want to limit the maximum size of the orders? Or disable one or more tiers entirely? No problem - You have control over the orders placed. Please inquire with any questions! (This version is better suited to guild requests; a larger version for volume industry sales is scheduled for release later) Thanks! GwennieAerlin (in DU) / gwennie_aerlynn#0 (on Discord) Pink Flamingo Industries / Shadow Union Available on Alioth at: ::pos{0,2,45.8947,92.0805,15.8965} VR Pod name: "Shadow Union Alioth Showroom" (Don't buy in VR!) Setup instructions/parts list: http://shadowpublic.kitsune.cc

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

New pads from The Gray Order (changed name from ADMI to Gray) Large core fully detailed with easy to use placement the footings are a basic voxel shape so if you need to make it taller is super easy! There are 2 dispensers one for regular 6mil and other is for discount option if you want 10 for 10mil off ( 50mil instead of 60mil) thanks for shopping cords for base are same VR "ADMI build store" position ::pos{0,2,-24.6313,16.8071,150.4663} name subject to change soon will alter here too.

This L Core Silo is great for extra storage space with room for 10 Expanded XXL containers. Place this in the middle of your flower and start filling. Room for parcels containers and more. You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

PYRAMID LUMEN GLASS FACTORY This factory can make a ton of luminescent glass in a day! 12000m3 per day! Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Pays for its self on day one! READ OUR BIO FOR MORE INFO