Dual Universe Creators

My old demon statue. Full M core. VR: The Syndicate Shop BP can be purchased on Alioth near market 6. ::pos{0,2,31.6129,108.1439,2.4078}

This is my entry for the 'Build Your Legacy' competition and while I think it fits the requirements I do not like it as much as the speeder I submitted. I think it is mainly due to the colours as I have not built with Tier 1 ore (Except concrete) for a long time so I only really had the colours provided to work with. It does feature a pad for parking your speeder underneath the structure. My favourite aspect of this design was the stands I setup for the mining units.

Hadron Mining Platform 8 Designed around our signature Hadron theme, the Mining Platform 8 delivers style and function to any outpost or mining operation. Comes equipped with 4x L Basic Containers and each mining unit housing includes markers for quick and easy placement. Utilizing Jericho’s Mining script, you’ll have all the information you need to keep on top of your mining game. From timers to calibration percentages, miner up time and more at a glance. A single detection zone activates the mining script and lighting so no more running around in the dark with a pen and paper. The centralized VR station provides instant access to all mining units on the platform without the need to move from the spot. When deploying the platform, make sure the stairs and the voxel square at the bottom of the platform are above the surface of the terrain. This will ensure you have access to the containers if you choose to swap them out. The raised platform and circular arrangement of the mining units allow the bonus ore to spawn in a ring around the construct allowing for ease of access when collecting. Check it out in our showroom! ---- Available after release. ----

UPDATE now available in new release. Just came back to the game, prices may be negotiable contact me in game or on discord Vazrik#6937 *4,000,000 per core, Not including materials. Recommended Galvanized gray aluminium and Luminescent White glass. 4100 honeycomb single voxel thick per core 8200 honeycomb double voxel thick per core 1 L core per core Roughly 200 Luminescent glass per core (may vary but its a good starting guestimate) *Custom built to match your current setup. *Accurate runway measurements and markings(doubled in size to increase visual and utility) *Recommended at least 16 cores in length, 13 cores in length is minimum for this design. Redesigns are necessary for anything smaller, this may be possible to achieve but will be at additional cost. *Can add taxiway's or possibly parking pads if needed, should be no change in price per core depending on the request.

Tiered of not having a good spot to park your ship? Want to have a cool platform to display your creations on to sell? Or u just want a cool looking landing platform for your base. This landing platform could be the solution. It is the full size of an L core, whit room below to place at least a big EXL container. -Big enough to park or showcase multiple ships -Stairs for easy access to the platform -Lights for decoration set to blinking in a neat pattern ;) -Highly detailed -Comes whit a re-color kit The Landing Pad is available as BluePrint from a dispenser located near the platform. U can take a look through VR, search for "CCU Voxel Library" Location >Alioth ::pos{0,2,34.8012,72.5860,258.3008} Whit our all in one service we offer u the following options: BP from dispenser 10M All honeycombs needed from dispenser 1.25M All lights if u want those from dispenser 1.4M Take care Noveans and enjoy your day!

This makes every size Vertical Lights! --- 24 Hour Production with no boosting talents --- Vertical Lights XS - 960 Vertical Lights S - 240 Vertical Lights M - 240 Vertical Lights L - 240 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

Make a feature of your unsightly DSAT and turn it into an observatory. Voxel shapes only... pls decorate it in your own style... dm me if you want the image and i'll link it. Available to view on my Alioth Base to the left of the hangar behind my Yacht's dock. DRM FREE.... so you can copy and paste it onto an existing core. BP's available in the lil BP shop on my Alioth base HERE ::pos{0,2,2.4733,104.9278,1.5932} You can view all of my creations in vr....Orri Alioth Base... and you will arrive in the airport arrivals hall thanks for looking :-)

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Back by popular demand! My #1 selling space factory shell. Ample room to run any type of industry and plenty of room for storage. The base is a full L core footprint, and there is a full L core landing pad on the roof for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

Introducing the Consolidated Fuel Refinery MKI This small core refinery is designed to produce Nitron and Kergon- X2 fuel. Featuring a small waiting area with 2 dispensers for fuel or other goods, 4 Large basic miners, An industrial themed interior and a roof top seating area. There is also another space in the building for storage or more dispenser, or even toilets if you fancy. *Elevator no installed in BP

This voxelmancy masterpiece was developed for GTF and Alioth Railway Company as a good looking structure that contains one large mining unit and two large Containers. VR: Oil Well It can be bought at a dispenser at ::pos{0,2,-3.7357,-20.6963,37.7172}. If you want to purchase more then 5 blueprints, please message me on discord for a discount. When placing the blueprint, place it like 1m underground.

This is the first construct I designed in beta. (Almost) free blueprint with No DRM. That means you can deploy one copy, then create your own core blueprint to make as many more as you require. Classic "Brutalist" style in concrete, iron and glass. Space for up to 8 miners. Surrogate pod for VR calibrating. Luminescent glass! Chimneys! Dispenser at Hadron HQ Alioth ( ::pos{0,2,-21.7618,122.5465,114.3602} ) When placing, the opening at the base faces away and to your right, 45 degrees from straight ahead. Rotate so that corner faces you and the opening will be facing you. The concrete foundation is 7 voxels high and can be set down to accommodate most terrain on Alioth with minimal or no flattening.

*Updated 11/1/22* Now includes Jericho's MU-Monitor Pre-Installed. Simply add MUs and link them to the programming board to see all info on one screen!! New BPs Available at D4nkWorks Showroom These are Long-Term Mining Towers with space for 8 Auto-Miners Designed to fit ANY terrain. The bottom of the tower can be sunken into the land as far as needed and has ladders for access from the ground. Add a surrogate pad and you can easily VR there to calibrate your off-world tiles. The landing pad on top fits S core ships easily and provides EZ access to all 8 miners and the Hub. Landing activates the screen which shows how much ore is currently available. LUA included. Basic Mining Towers have space for your Org name on the side to let people know who's mining in style!

Own a Warp Beacon of your own - Then make one , in this faithful recreation of the must have strategic element. Get the Bacon cooking ! With DIA customised industry, storage and schematics monitoring and IC industry AR HUD scripts, incorporated into a modern stylish command room, you'll know precisely what you need and when you'll get your coveted beacon. Configured to be able to produce two beacons per month, all machines and storage are linked and signed with what to produce and appropriate maintain levels. Come see the wonder at the DIA Plaza and find the BP dispensers in our Showroom display. For those not interested in cooking bacon, but other tasty treats, get the voxel shell to build your own factory into - only 20Mq

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO