Dual Universe Creators

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

PYRAMID SCREEN FACTORY: Tired of paying 8k for an XS screen? We were too. So here it is, a screen manufacturing beast. This factory can make a literal ton of screens a day. with 10 assembly lines, this factory is capable of making xs,s,m screens and xs,s,m,l transparent screens. all 10 assembly lines can produce screens of your choosing since they all use the same parts. Just put whatever sized screen schematic you want in any of the assembly lines. they can run one of each type or all of the same type. makes well over 1000 screens per day! XL screen factory coming soon! READ OUR BIO FOR MORE INFO

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

Greetings! I present to you a warp cell factory that produces 240 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 15m Quanta 2 - Blueprint + Buffs/Help setting up, 30m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 50m Quanta

Cool looking L sized Landing pad for AGG platforms, it has a decorational pulsor on the bottom and has at least 3 voxel layers. The pad was designed to be a "standalone" placing them close together will need a lot of work... PS: dont mind the voxel LOD artifacts in the photo's, the pad is nice and clean Come take a look at it, VR: Markii's showroom

A wall made of 3006 animated lights on a dynamic core to welcome visitors :) You can see it here : ::pos{0,2,-23.9491,-10.5283,119.8070} (Yentico base in front of Alioth Market 13) To visit in VR, search "Light Wall" Peace - YesmanDu974

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

At daytime a fairly normal looking tower, but at night it seems to be burning. 5,000,000 quanta for a batch of 8 blueprint copies. Dispenser is in the penthouse underneath the landing pad in the top of the tower. Deploying strategy: 1. deploy the base core 2. deploy the North core, then the East, then the South and then the West core 3. deploy the first floor on the base core 4. deploy the second floor on the first floor 5. the second floor bp copy is DRM free so you can mulitply it to make your Lotus tower higher 6. deploy the top floor on the final second floor core NOTE! Possible problems: while connecting the North, East, South and West cores to the base core you may have to remove glass panels from the base (4 in the center) and then place them back when the core is placed. Check out the tower in VR: The Burning Lotus or visit at location: ::pos{0,2,40.7757,116.8397,0.0000} Have fun!

Blueprints are now available for purchase at Hadron HQ Alioth. ( ::pos{0,2,-21.7618,122.5465,114.3602} ) Extra low cost! Buy as many as you need to deploy. MC Industries presents the Basic Platform S, a multi-purpose S core platform that is designed for low cost and maximal utility while presenting a heavy-duty industrial aesthetic reminiscent of offshore drilling platforms. The tall pillars upon which the platform rests allows for the most flexibility for placement on uneven terrain with minimal terraforming, that a small core would allow. Only tier1 materials are used, so it could be deployed quite soon after launch. It can easily be used as a remote mining platform. Six openings in the floor allow mining beams to penetrate and the raised platform allows plenty of room for ore to spawn beneath the mining units for easy collection. The interior features a display stand with space for two large transparent screens and shelves for placing container hubs, programming boards, detection zones and all the other elements needed to support mining and factory LUA applications. There is enough space for 10 Container L inside, plus the mining units and even a few industry units for ore or fuel refining. The roof of the structure can be used as a landing pad for small craft with a ladder providing access. If you don't want the mining unit holes in the floor, a simple copy-paste operation can be done to replace them with a floor segment that is solid. Though the photos show some elements placed, the blueprint is supplied without any elements. Just voxels. You can grow and expand the amenities like LUA and larger containers as Noveans manufacturing capabilities expand after launch. So if you want a mining or industry platform that is cheap to build but looks better than a flat piece of silicon honeycomb and can grow with your Novean talents, take a look at the Basic Platform S from MC Industries.

Own a Warp Beacon of your own - Then make one , in this faithful recreation of the must have strategic element. Get the Bacon cooking ! With DIA customised industry, storage and schematics monitoring and IC industry AR HUD scripts, incorporated into a modern stylish command room, you'll know precisely what you need and when you'll get your coveted beacon. Configured to be able to produce two beacons per month, all machines and storage are linked and signed with what to produce and appropriate maintain levels. Come see the wonder at the DIA Plaza and find the BP dispensers in our Showroom display. For those not interested in cooking bacon, but other tasty treats, get the voxel shell to build your own factory into - only 20Mq

Introducing the Consolidated Fuel Refinery MKI This small core refinery is designed to produce Nitron and Kergon- X2 fuel. Featuring a small waiting area with 2 dispensers for fuel or other goods, 4 Large basic miners, An industrial themed interior and a roof top seating area. There is also another space in the building for storage or more dispenser, or even toilets if you fancy. *Elevator no installed in BP

A simple Mine site with a Large container and 4 MU, a screen and a keyboard. Token is a full package that you can deploy where you want. Version exist without Script.

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.