Dual Universe Creators

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

Ikara Industries presents the "Ikara Warp Cell Tower S01 V2". Optimized Version of the "Ikara Warp Cell Tower S01 " You want to visit distant planets, but flying takes too long? Then the "Ikara Warp Cell Tower S01 V2" is just the thing for you. With this Warp Cell Tower you can produce up to 528 Warp Cells per day depending on your talents. (testet with level 4 talents on all parts) The Tower includes: - 9 L container for pure ore - 1 L container for the warp cells - Container script (ContainerMonitoring) provided by DU_ASTco - Schematics monitor provided by GcGoat - S core - 2 to 8 units each for the production of the Warp Cell intermediate parts - 16 Uncommon glass furnaces for manufacturing the warp cells. - The outer walls can be replaced with the separately available Ikara Panel Kit S01. What else you should know: - All signs can activate with the manual button underneath the main screens - For efficient and uninterrupted warp cell production, the factory should run for 24 hours without warp cell schematics. VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries or Ikara Industries Exchange (in the Yellow Hall of Alioth Exchange) Any questions? - Message to @Ikara2184#2629 on Discord.

This voxelmancy masterpiece was developed for GTF and Alioth Railway Company as a good looking structure that contains one large mining unit and two large Containers. VR: Oil Well It can be bought at a dispenser at ::pos{0,2,-3.7357,-20.6963,37.7172}. If you want to purchase more then 5 blueprints, please message me on discord for a discount. When placing the blueprint, place it like 1m underground.

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

PYRAMID T1-3 REFINER+FUEL FACTORY This factory does just what it says. Also makes nitron and X1-4 fuel from byproducts and 2 adjustable transfer units to control how much is made. 8 basic refiners to keep up with most schematic demands. Easy use: Ore in, Waste Out, Product Out format All container hubbed for easy expansion! READ OUR BIO FOR MORE INFO

NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 50% off blueprint price at the moment on dispenser loaded industries presents This stylish futuristic showroom with viewing balcony, display your ships in style with this very bright display space, this is my 20th design in dual universe, you can view in VR search (loaded industries showroom) and head straight up the road and your find the showroom, pictures dont do it justice really best to see in person, you can remove the writing and add your own name to the building any questions please message me on discord loaded#2378

PYRAMID CANNON AMMO FACTORY XSSMLTK: Need cannon ammo? Need a lot of it? This factory makes 8 different types of cannon ammo! XS, S, M, L kinetic and thermic makes 1000's of rounds per day! low build cost (approx. 6mil) we sell everything needed to build our factories on site. Happy hunting! read our bio for more info:)

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Tired of pads being too small for your need? Zealot Company has your needs covered with this quadcore landing pad! It has a complete interior for your storage needs and elevators for mobility around the structure. Stop by for an in-game look at ::pos{0,2,-23.5467,16.8591,36.0142}, you can purchase the bp at ADMI Build Store at the Zealot Company dispensers. Note: Due to the snap tool not overlapping element with voxels each pad has its own set of elevators, some will need to be deleted, if you want and then centered.

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Simple' version, a lower cost entry into the Omnifactory with minimal industry elements required to deploy. This does mean expanding capacity is a little more involved than the up-coming 'Expanded' version, requiring each new industry machine to be linked to each component storage directly. However, the layout configuration and open structure allow this to be accomplished with minimal effort. BP dispenser is set up inside the Omnifactory for a extremely reasonable price of 25Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

PYRAMID FUEL FACTORY: MAKES FUEL, AND A LOT OF IT MAKES; NITRON 600KL PER DAY KIRGON X1-X4 300KL PER DAY OF ONE OR APPROX 75KL OF EACH EASY TO SET UP, EASY TO EXPAND STORAGE WE NOW HAVE A MODEL THAT MAKES XERON TOO 100KL PER DAY same price READ OUR BIO FOR MORE INFO

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

makes all the basic elements and XL uncommon space engines ,vr MAGIC ELEMENTS FACTORY . location: ::pos{0,2,40.7473,91.6040,93.7875}

Decorative Element 20 Voxel Diameter drm free VR "Alioth Marina"

Designed by AtmoCorp, a subsidiary of Infinity Corporation. The AtmoCorp T2 Outpost is the next step up from your Starter outpost. Designed to be deployed on any terrain, the T2 Outpost comes with a personal landing pad, two floors of living space, and an outdoor terrace and jacuzzi. With a Container Hub and up to ten large containers pre-installed, with T5 talents included it has a storage capacity of 1920kl. *NEW updated version includes four Basic Mining Units and a rack to hold them. If you don't plan on mining, it can be deleted. The Outpost is built on the top half of a Medium Core. It can be placed with the lower door at ground level, with half the core below the ground to allow for an underground factory. Or the core can be raised up as high as you want, and the lower door and support structure can be copy and pasted to extend it to the ground. Blueprint for sale for 5M 7km south of Market 7 ::pos{0,2,19.3915,97.2582,147.7494} Or in VR search for "AtmoCorp Alioth" DM [IC]Atmosph3rik#6658 on DISCORD with any questions.