Dual Universe Creators

Small core mining rig with space for up to 10 L mining rigs, containers and refiners. Added hatches for easy access to the surface ore. Mostly all aluminum honeycomb for easy placement.

A mining rig with style - instead of floating mining units everywhere. Space for eight mining units + L container. Mining unit output accessible via elevator to basement area. Mining units not included in BP - place them separately. VR: Deeh Store (dispenser inside the building, 2nd floor next to elevator; turn left when entering 2nd floor via stairs) If you have questions, don't be shy - contact me on Discord!

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

M core with landing area on top Identical to the other M landing pad module but without interiors (uses less honeycombs) 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Purple Plastic: replace with color of your choice when customizing 3.5k alu 700 plastic 200 iron 100 carbon fiber / steel

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 my latest static building is a large factory you can visit in vr seacrh for loaded industries showroom and exit that building and your find this factory across runway, this large core factory pretty much takes up the full height of a large static core and comes with 5 floors, you can copy and paste more racks and place as you need them or you can even delete all racks and turn in to a showroom or anything you like, there are 2 different blueprints one with and one without a expanded small gate so you can build without spending millions on a door that you can add later if you wished, any questions please message me on discord, location to your right for dispensers and please dont buy in VR

Step up your mining ops with a Thumper Mining Laser from Dumboiz United. This S-Core mining unit is here to do some work! 4 mining units converge at a singular point, making gathering your surface harvest easier than ever! One large container is neatly stored up top, with a VR platform and container hub placed conveniently at the ground level. The core itself sits on the floor of the build box, making placement easy, and cleanup a breeze. Quit wasting time at your mining units! Calibrate 3/4 of your mining units from one spot, harvest all of the surface ore from one spot, and find your mining station from from a kilometer away with the scale and light emitted from this laser! Everyone has a platform, now. Everyone's going to have a Thumper. (Currently equipped with Basic Mining Units -- if you want to upgrade your laser, message isyron#4015, bring 4 upgraded units, and he'll do the swap and give you the BP!)

This factory is perfect for starting a mega factory in space from scratch. All T1 setup is already in BP with all products and parts. You can easy start to build everything you need with this setup. 5 floors T1 to T5 and a big space with view on planet with glass panel You only need puts ores and schematics to begin. To visit the factory in VR, contact me on discord : kromen New Alioth Dispenser ::pos{0,2,41.7148,93.8707,74.8080} Visit Factory ::pos{0,0,-13786.3354,203690.3859,55550.9950} VR : Space Factory Beginner Credits for scripts : https://github.com/LocuraDU/DU-Locura-Storage-Info https://github.com/codeinfused/Indy-Hud Credits for Landing pad and wall : https://du-creators.org/makers/Loaded%20Industries

We are thrilled to announce the launch of the Double L Core Hangar. This hangar is designed to provide you with the ultimate storage solution for your ships. With its Double L Core design, it offers ample space for your ships while keeping them safe and secure. The Double L Core Hangar is built to last, with a sturdy construction that can withstand even the toughest of conditions. It is equipped with the latest technology to ensure that your ships are always in top condition, with advanced climate control systems that regulate temperature and humidity levels. Whether you’re a seasoned pilot or just starting out, the Double L Core Hangar is the perfect choice for all your storage needs. So why wait? Get your hands on the Double L Core Hangar today and take your flying experience to the next level! 2 Blueprints included VR: SKY Blueprint Store ::pos{0,2,54.1655,109.9058,46.1828}

This is the first construct I designed in beta. (Almost) free blueprint with No DRM. That means you can deploy one copy, then create your own core blueprint to make as many more as you require. Classic "Brutalist" style in concrete, iron and glass. Space for up to 8 miners. Surrogate pod for VR calibrating. Luminescent glass! Chimneys! Dispenser at Hadron HQ Alioth ( ::pos{0,2,-21.7618,122.5465,114.3602} ) When placing, the opening at the base faces away and to your right, 45 degrees from straight ahead. Rotate so that corner faces you and the opening will be facing you. The concrete foundation is 7 voxels high and can be set down to accommodate most terrain on Alioth with minimal or no flattening.

PYRAMID LUMEN GLASS FACTORY This factory can make a ton of luminescent glass in a day! 12000m3 per day! Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Pays for its self on day one! READ OUR BIO FOR MORE INFO

Greetings! I will build you a customized factory based off of the layout I use for my own personal factory. My factories are always easy to understand and to expand upon. You're welcome to check it out in VR at "PvP Shop". Pictures are from another build I am currently selling. Reach out to me on discord for more information. TMA#0001

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

Looking for a good start to your gigafactory? This L Static Core balances detail with function - Three floors stretch across the majority of the core giving you the space needed to expand over time. Save yourself the trouble of moving your factory from one core to the next and get started with Cronnus' Large Factory Shell. Example Layout: Floor 1 - Refineries/Smelters/Storage Floor 2 - Intermediary Parts Floor 3 - Assembly Lines Or make this a hybrid and use the first floor as a showroom for a couple ships or dispensers for your products! How to find: - VR - Search for "DSI Dark Forge HQ" (do NOT buy a BP in VR!!) - ::pos{0,2,21.9994,107.1816,6.5935} - Dispenser is here Near Alioth DM7 - Alioth Exchange Market (pending submission - stay tuned!). Cronus#2214 or Firestorm#4004 on Discord if you have any questions!