Dual Universe Creators

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

Ikara Industries presents the "Ikara Static Cores Factory". You want to build something, but you don't have the cores. The way to the market is too far for you! Then the "Ikara Static Cores Factory" is just what you need. With this Cell Tower factory you can produce the following cores per day depending on talents. XS up to 847 S up to 384 M up to 34 L up to 16 (tested with level 4 talents on all parts) The tower contains: - 9 L container for pure ore - 2 L containers for core output - Container script (ContainerMonitoring) provided by DU_ASTco - Schematics Monitor provided by GcGoat - S-Core - 1 to 4 per core production - Open and light flooding design - Exterior walls can be added with a little customization using the Ikara Panel Kit S01, sold separately What else you should know: - All signs can be activated with the manual button next to the elevator - To ensure efficient and uninterrupted core production, the factory should run 24 hours without main core schemes. VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries Any questions? - Message to @Ikara2184 on Discord

In the process of moving, blueprints are available to Kosmos Exchange. Next up in modular factories is Czars Space Fuel Factory. Making Nitron and up to 2 styles of Kergon. Add it onto one of my Space BigLandyPaddys for full autonomy in space. Command center with Jerichos Storage LUA and My Hub screens. See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

Hadron Landing Pad Medium ---Features:--- Detailed voxelwork. Only Tier 1 voxel used. 800m3 Plastic 200m3 Brick 16 easy to place L-Container storage. Plenty of space for adding additional industry like a fuel refinery. With the voxel preview and the coming core snap feature, the pad will easily integrate with your base. Centered to the build box of the M core to allow for more storage or industry below. Visit our showroom in VR (outside area).

Pyramid mega container factory: Makes every size container xs s m l xl xle makes every size ammo container xs s m l makes two of each size at a time all machines labeled to make schematic placement a breeze schematic lists for all our M core factories can be found on our discord like all our factories comes with in game and discord support

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!

Decorative Element drm free VR "Alioth Marina"

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

In the process of moving, blueprints are available to Kosmos Exchange. What we have here is the brand-new warp cell factory from Czars Workshop. Making up to 280ish cells a day, this is the perfect addition to any of my modular space stations or space landing pads. Let Czar help you live in space! See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

Does your organization/guild have frequent requests for random batches of voxels? Do you find it time-consuming to process all of these orders manually? Enter the Vox in a Box! This is an M-core deployable factory that your org can use to make any kind of voxel, of any tier, whenever they want, independent of the member's talents and without involving Legates or factory managers. Members just place the order with the ordering terminal at their own convenience, return a few minutes later, and collect their voxels in the output bin. Delivers with L5 industry talents. Want to limit the factory usage to just guild members? Want to limit the maximum size of the orders? Or disable one or more tiers entirely? No problem - You have control over the orders placed. Please inquire with any questions! (This version is better suited to guild requests; a larger version for volume industry sales is scheduled for release later) Thanks! GwennieAerlin (in DU) / gwennie_aerlynn#0 (on Discord) Pink Flamingo Industries / Shadow Union Available on Alioth at: ::pos{0,2,45.8947,92.0805,15.8965} VR Pod name: "Shadow Union Alioth Showroom" (Don't buy in VR!) Setup instructions/parts list: http://shadowpublic.kitsune.cc

A landing pad on L core. Built on top of core, with a bit of margin so you can still place biggest elements and / or build a bit, and expand underground. Easy to place with its big pillars Can be seen on VR: Aerogics L Core Landing Pad *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Yellow Plastic: lines on landing area Luminescent White Glass: inside lights Luminescent Yellow Glass: outside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

50% off blueprint price at the moment on dispenser This large landing area covers the floor space of a Large static core its a must visit you can visit in vr search: loaded industries showroom and head across the runway to check it out, heres also a quick video link https://www.youtube.com/watch?v=SrIdpuqcb9s

50% off blueprint price at the moment on dispenser Welcome to my latest static build, Im really happy how this came out, build all your future ships in style or just store them, has storage space on balcony and also comes with landing pad on roof top not really much else to say i think the pictures says it all :), you can view in VR search loaded industries, This hangar is also available in kit form please check my other posts any question please Dm me on discord or add me in game loaded

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.