Dual Universe Creators

Greetings! I present to you a warp cell factory that produces 240 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 15m Quanta 2 - Blueprint + Buffs/Help setting up, 30m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 50m Quanta

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Full L core space station perfect for your space factory. With 4 landing places (M cores) that perfect Align with the main factory. I can help install everything. The inside is empty. Discount if u buy more 2 for 15 mill 3 for 20 mill 4 for 25 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Will be updating store location for release in weekish atm emladra#8532 is available if you wish to purchase anything. Hoping to be setup with new store on madis in a week possibly 2 depending on resources lol. By popular request i have made a medium core based landing pad ideal for small and xs cores in space fits up to fits 2 small core ships and 4ish xs ships plus depending on the size and box these pads help keep ships apart and in there own area nicely! enjoy! questions ask emladra#8532 discord thanks! vr is (ADMI SALES ships and pads) and cords for base are ::pos{0,1,-53.2259,-47.4236,827.1160}

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The X8 marks the largest X series made by Locura. Like all other X Series units, the X8 brings all the features you could expect from a Locura X Series rig. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

VR "VO Factory Sales" Materials cost on the market was about 6 mil. The cost of BP is $6 mil and that includes me deploying it. You can supply materials and i supply BP and deployment and you just pay me $6mil or i supply everything and you pay $12 mil. The price includes x3) Basic Containers L per section (x9 total). THIS Does Not Include Mining Units. Tri Hex Mining Structure allows you to mine from 3 hexes in 1 building. Equipped with a Surrogate Pod, VR and Motion for container hub. Has Landing pad design ontop with elevator access to main floor. Set up to x8 MUs on each section and room for more if needed. Has Hideaways for up to 10 L containers for each section. I do not have a setup to show anyone step by step. I have this set for token deployment only due to the hard to get ppl to understand the setup. I can place it way faster than the time to walk anyone thru the process.

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

This M Core Factory Shell will fit Tier 1-3 ore refiners and product plus assembly lines. Fits 1 XL Assembly lines. 1 basic or 1 uncommon. Plus a mix of any lines you want. Makes organizing your production easy. Room for all your containers in the ceiling. BP Requires M Core 1 Basic container XS (schematic container) 1 Detection Zone M 4 Elevator XS 1 Relay XS 2 Screen XS 2 Sliding Door M You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000} 6 Square Light M 6 Square Light S 9 Vertical Light M 7 Vertical Light XS 4 Window M

Last few months I have been working on this Market Replica. It worked out pretty well. Just check it out in VR. (Market Replica East and Market Replica West) Note: No market machines included. ;-) Place your dispensers there or do what you like. Beneath the base there is a ton of space to make a factory or anything you like. Currently available @ Drack shipshow. Later available @ Kosmos showroom.

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

Deluxe pads in space on a Large core took a min but its now done the current configuration is red lum glass and black carbon fiber witch is totally epic looking! These 2 colors can be easily swapped when placing to your choice of colors. ( if you see orange steel and lum glass also switch kept trying to find and couldnt) Available at admi temporary store until i finish the official admi store thanks !

From the mind of our long-term Shadow Union member, Legate, and all-around good guy hailing from the South of London may I present Alethion's "CITADEL OF DOOM". Put a factory in it, put a showroom in it, try to summon Skeletor for the ashes in there, come on down, and pick yours up today. not guaranteed to summon Skeletor, or any other, devil, demon, wraith, specter, phantasm, ghoul, spector, spooks, or ghosts. From this dimension or any others. Good day. ::pos{0,2,45.8846,92.0773,15.9071} Vr/ is Shadow Union Alioth Showroom 26km north of Market 6

Note: Some furnishings in this blueprint require the Art Deco (Silver Backer Rewards) Features: 600kl of storage Once a simple house for servants at the Ivory Island Resort. After new management took over servants were evicted and the housing upgraded to include luxury amenities, staff now commute to work from the mainland. This house includes a new custom art piece that is AI Generated through the use of variables and prompts. Furnishings also include Art Deco pieces from old Earth, that are limited to the most affluent of clients. (Tokens will not be made available)

Pyramid Container Factory: OUR TOP SELLER Can run 2 L schematics or 2 M schematics or 1 L 1 M simultaneously. producing 16L or 32 M per day. or 12 L and 24 M. At the same time it will produce S, XS containers @ 48 and 96 per day simple design. Ore in, waste out, product out. everything is container hubbed for easy expansion. READ OUR BIO FOR MORE INFO

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!