Dual Universe Creators

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura L6 is part of our Lightweight Series. Designed to have a lot fewer elements and also cut down on Honeycomb usage. The L Series is a cheap, lightweight alternative for those needed fast deployment of rigs. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/TB2ecEd5rs --- Buy Locations --- Locura Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura Alpha Base -- Other VR Locations -- Locura Exchange

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}

2B Designs Duo Hangar 2x L Core Size Hangar - Plenty of Workspace (Can fit L core ship) - Plenty of light - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - 2xL Core Size Landing pad - Elevator / Hole Access to the floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) Make sure to over lap the middle of the cores to fit together VR: "2B Hangars Display" Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Landfall pads (large static core) medium and xs core marked landing zones on pads. VR ADMI build store or position ::pos{0,2,-24.6313,16.8071,150.4663} on alioth. questions emladra#8532.

•The first and only Warp Cell Factory provided on the most compact of cores! (XS) •Blank design, customise its facade to match your environment! •Easy display & management system! •Every Element accessable without space wasting walkways! •*Provides up to 173 Warp Cells per 24 hours! • Use either Pures or Ores! Or a combination of both! • Available as Static or Space version! [UPDATED 2024] The bottom (Catalyst overflow) can be used as the Schematics Container, requiring no additional construction edits. [UPDATED 2023] No overlap - Future update ready! Optimised to hold 3 days production in Ores AND Pures! (over 300kl storage!) "SWARM Flotilla Shop" Surrogate Pad available for preview of working display! * Based on Talent application. Talent application and setup provided upon request for an additional 8,000,000ħ Contents: Basic 3D Printer 2 Basic Chemical Industry 2 Basic Electronics Industry 3 Basic Glass Furnace 6 Basic Recycler 2 Basic Refiner 7 Basic Smelter 2 Canopy Windshield flat M 4 Canopy Windshield flat S 8 Container Hub 7 Container M 2 Container S 11 Container XS 14 Long Light M 2 Manual Switch 2 Programming Board 2 Static Core Unit XS 1 Transfer Unit 1 Transparent Screen M 1 Transparent Screen XS 2 Uncommon 3D Printer 2 Uncommon Checmical Industry 1 Uncommon Electronics Industry 12 Uncommon Glass Furnace 8 Uncommon Refiner 3 Uncommon Smelter 1 Vertical Light S 5 Glavanized Dark Gray Aluminium 402 Schematics Required: (Cost of 35,407,939ħ) Al-Fe Alloy 1 Calcium Reinforced Copper 1 Cu-Ag Alloy 1 Glass 1 Advanced Glass 1 Ag-Li Reinforced Glass 1 Polycarbonate Plastic 1 Polycalcite Plastic 1 Polysulfide Plastic 1 Basic Component 1 Basic Connector 1 Uncommon Connector 1 Basic LED 1 Uncommon LED 1 Basic Antimatter Capsule 1 Uncommon Antimatter Capsule 1 Advanced Antimatter Capsule 2 Basic Quantum Core 1 Uncommon Quantum Core 1 Advanced Quantum Core 2 Advanced Antimatter Core 6 Advanced Quantum Alignment Unit 6 Warp Cell 5 Pure Hydrogen 1 Pure Oxygen 1 Pure Aluminium 1 Pure Carbon 1 Pure Iron 1 Pure Silicon 1 Pure Calcium 1 Pure Copper 1 Pure Sodium 1 Pure Lithium 1 Pure Silver 1 Pure Sulfur 1

This L Core Silo is great for extra storage space with room for 10 Expanded XXL containers. Place this in the middle of your flower and start filling. Room for parcels containers and more. You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

VR "VO Factory Sales" This will make every type and every size screen on the market! Screen and Sign Factory 24 Hour Production with no Talents x 3.75) Expanded Modern Screen XXL x 3.75) Expanded Modern Transparent Screen XXL x 60) Modern Screen L x 240) Modern Screen M x 240) Modern Screen S x 15) Modern Screen XL x 240) Modern Screen XS x 60) Modern Transparent Screen L x 240) Modern Transparent Screen M x 240) Modern Transparent Screen S x 15) Modern Transparent Screen XL x 240) Modern Transparent Screen XS x 240) Screen M x 240) Screen S x 1) Screen XL x 240) Screen XS x 240) Sign L x 240) Sign M x 240) Sign S x 240) Sign XS x 3.75) Super Expanded Modern Screen XXXL x 1) Super Expanded Modern Transparent Screen XXXL x 240) Transparent Screen L x 240) Transparent Screen M x 240) Transparent Screen S x 240) Transparent Screen XS x 240) Vertical Sign L x 240) Vertical Sign M x 240) Vertical Sign XS If you have any questions please feel free to reach out to me on Discord: theOmega28.36#1869

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Make a feature of your unsightly DSAT and turn it into an observatory. Voxel shapes only... pls decorate it in your own style... dm me if you want the image and i'll link it. Available to view on my Alioth Base to the left of the hangar behind my Yacht's dock. DRM FREE.... so you can copy and paste it onto an existing core. BP's available in the lil BP shop on my Alioth base HERE ::pos{0,2,2.4733,104.9278,1.5932} You can view all of my creations in vr....Orri Alioth Base... and you will arrive in the airport arrivals hall thanks for looking :-)

Warp Cell Cube Design inspired by the famous Mario Bros Warp Cube, this XS Core is packed to the bone with industrial machines and design to have a production capacity of 520 warp cells per day, needing only to feed with the 10 ores required for warp cell production, Pure Hydrogen and the 6 schematics needed for warp cell production. Features: - Capacity: 520 warp cells per day with moderate T1/T2 production talents - Feeds from Ores and Hydrogen, so no need for additional machines (refiners e.g.) - Easy setup: when powered on, all machines will be calibrated to produce the right amount of intermediate products to feed into the 16 Glass furnaces for Warp Cell production - Easy maintenance: elaborate monitoring screen, showing the status of each (sub)assembly being produced as well as the inventory levels of the Ores, blueprints and Hydrogen. - Token available on request, please do expect some time needed for the production of the machines - Support during setup on request (although should work straight from the box) No more need for giant setups for warp cell manufacturing! This XS core is probably all you need for your personal warp cell needs! Location for watching the cube in action: ::pos{0,2,7.7358,80.4968,220.3335} visitable in VR though: Warp Cell Cube Demo

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

This M Core Factory Shell will fit Tier 1-3 ore refiners and product plus assembly lines. Fits 1 XL Assembly lines. 1 basic or 1 uncommon. Plus a mix of any lines you want. Makes organizing your production easy. Room for all your containers in the ceiling. BP Requires M Core 1 Basic container XS (schematic container) 1 Detection Zone M 4 Elevator XS 1 Relay XS 2 Screen XS 2 Sliding Door M You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000} 6 Square Light M 6 Square Light S 9 Vertical Light M 7 Vertical Light XS 4 Window M

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

2B Designs Hangar L Core Size Hangar - Plenty of Workspace - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - Good Size Landing pad - Elevator / Hole Access to floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) VR: "2B Hangar 2B01 Display" For a display of the Hangar Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

This makes all size Advanced Optimized Containers EXXL - x2 every 7 days 9 hours XL - x2 every 3 day 16 hours L- x1 every 44 hours M- x1 every 22 hours S- x5 every 24 hours XS- x8 every 24 hours Our factories are as friendly user as we can make them. Everything is labeled for easy start up. All factories are setup to drop in raw ore and let it do the work!! Other than putting in schematics which everything is also labeled to let you know what units require what schematics!! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions