Dual Universe Creators

Cool looking L sized Landing pad for AGG platforms, it has a decorational pulsor on the bottom and has at least 3 voxel layers. The pad was designed to be a "standalone" placing them close together will need a lot of work... PS: dont mind the voxel LOD artifacts in the photo's, the pad is nice and clean Come take a look at it, VR: Markii's showroom

12 Large (static) core runway 2x6. full built with skirt runway is all at the top of the cores so can make skirt taller if desired to put stuff under it. Will be making another much larger version in the future after i make more quanta! vr Admi build store or visit at ::pos{0,2,-24.6842,16.8702,151.5735} runway is outside the landing zone for display will eventually put the landfall pads around it as they are built for it. Thanks for looking and buying and all that stuff!!!!!

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

PYRAMID CANNON AMMO FACTORY XSSMLTK: Need cannon ammo? Need a lot of it? This factory makes 8 different types of cannon ammo! XS, S, M, L kinetic and thermic makes 1000's of rounds per day! low build cost (approx. 6mil) we sell everything needed to build our factories on site. Happy hunting! read our bio for more info:)

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

This factory is perfect for starting a mega factory in space from scratch. All T1 setup is already in BP with all products and parts. You can easy start to build everything you need with this setup. 5 floors T1 to T5 and a big space with view on planet with glass panel You only need puts ores and schematics to begin. To visit the factory in VR, contact me on discord : kromen New Alioth Dispenser ::pos{0,2,41.7148,93.8707,74.8080} Visit Factory ::pos{0,0,-13786.3354,203690.3859,55550.9950} VR : Space Factory Beginner Credits for scripts : https://github.com/LocuraDU/DU-Locura-Storage-Info https://github.com/codeinfused/Indy-Hud Credits for Landing pad and wall : https://du-creators.org/makers/Loaded%20Industries

No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Modern, luxurious and affordable accommodation. The luxury style condo is designed to provide big open plan areas for hosting your friends and displaying your trophies, while still providing a large private apartment room above. There is a moderate size shelter area for a personal vehicle to be parked, allowing for off-street parking and mild protection against the weather, should the environment be a little rough. Built on the lowest of the constructs grid structure, this spacious condo provides ample opportunity for further expansion outwards & upwards, should the new owners wish to add on a 3rd floor or simply add another room over the sheltered parking. With big windows all around and luxury interior decoration, one can always enjoy spectacular views, while resting in comfort. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

•The first and only Warp Cell Factory provided on the most compact of cores! (XS) •Blank design, customise its facade to match your environment! •Easy display & management system! •Every Element accessable without space wasting walkways! •*Provides up to 173 Warp Cells per 24 hours! • Use either Pures or Ores! Or a combination of both! • Available as Static or Space version! [UPDATED 2024] The bottom (Catalyst overflow) can be used as the Schematics Container, requiring no additional construction edits. [UPDATED 2023] No overlap - Future update ready! Optimised to hold 3 days production in Ores AND Pures! (over 300kl storage!) "SWARM Flotilla Shop" Surrogate Pad available for preview of working display! * Based on Talent application. Talent application and setup provided upon request for an additional 8,000,000ħ Contents: Basic 3D Printer 2 Basic Chemical Industry 2 Basic Electronics Industry 3 Basic Glass Furnace 6 Basic Recycler 2 Basic Refiner 7 Basic Smelter 2 Canopy Windshield flat M 4 Canopy Windshield flat S 8 Container Hub 7 Container M 2 Container S 11 Container XS 14 Long Light M 2 Manual Switch 2 Programming Board 2 Static Core Unit XS 1 Transfer Unit 1 Transparent Screen M 1 Transparent Screen XS 2 Uncommon 3D Printer 2 Uncommon Checmical Industry 1 Uncommon Electronics Industry 12 Uncommon Glass Furnace 8 Uncommon Refiner 3 Uncommon Smelter 1 Vertical Light S 5 Glavanized Dark Gray Aluminium 402 Schematics Required: (Cost of 35,407,939ħ) Al-Fe Alloy 1 Calcium Reinforced Copper 1 Cu-Ag Alloy 1 Glass 1 Advanced Glass 1 Ag-Li Reinforced Glass 1 Polycarbonate Plastic 1 Polycalcite Plastic 1 Polysulfide Plastic 1 Basic Component 1 Basic Connector 1 Uncommon Connector 1 Basic LED 1 Uncommon LED 1 Basic Antimatter Capsule 1 Uncommon Antimatter Capsule 1 Advanced Antimatter Capsule 2 Basic Quantum Core 1 Uncommon Quantum Core 1 Advanced Quantum Core 2 Advanced Antimatter Core 6 Advanced Quantum Alignment Unit 6 Warp Cell 5 Pure Hydrogen 1 Pure Oxygen 1 Pure Aluminium 1 Pure Carbon 1 Pure Iron 1 Pure Silicon 1 Pure Calcium 1 Pure Copper 1 Pure Sodium 1 Pure Lithium 1 Pure Silver 1 Pure Sulfur 1

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

VR "VO Factory Sales" We are also located at the Alioth Exchange in the Red Isle This makes all size Basic Containers. Everything is labeled with a maintain setting for really easy to setup from bp. I highly recommend letting factory run for 24 hours before starting the assembly lines for containers. 24 hour production rate with no talents that is if you set all machines to run. (The assembly lines that produce the containers do not have a maintain number set on them because i feel its up to the customer to set them as they desire) EXL - 3.75 XL - 7.5 L - 15 M - 30 S - 60 XS - 240 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 my latest static building is a large factory you can visit in vr seacrh for loaded industries showroom and exit that building and your find this factory across runway, this large core factory pretty much takes up the full height of a large static core and comes with 5 floors, you can copy and paste more racks and place as you need them or you can even delete all racks and turn in to a showroom or anything you like, there are 2 different blueprints one with and one without a expanded small gate so you can build without spending millions on a door that you can add later if you wished, any questions please message me on discord, location to your right for dispensers and please dont buy in VR

Roads for the ADMI Deluxe Pads easy to place and easy to change colors for! Location is the same ::pos{0,2,-24.6313,16.7490,95.7777} as the pads and vr.

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}