Dual Universe Creators

This mining factory is suitable for 8 Mining Units and 2 M Size Container or 1 L Container for Ore Storage. Build on cheap rescources it can be almost hand-crafted in your Nanocrafter. The blueprint do not contain any Mining Units or Containers. Feel free to place yourself. Get your blueprint at the dispenser. If you want to have the honeycomb and elements too, have a look on the second dispenser. You can also write me an message if blueprint is not available at the dispenser

Full L core space station perfect for your space factory. With 4 landing places (M cores) that perfect Align with the main factory. I can help install everything. The inside is empty. Discount if u buy more 2 for 15 mill 3 for 20 mill 4 for 25 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

PYRAMID GLASS PANEL FACTORY: Produces nearly 1000 Large panels a day 2000M 3000S Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Easily adjust to make more or less of each type READ OUR BIO FOR MORE INFO

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/TB2ecEd5rs --- Buy Locations --- ::pos{0,2,12.8827,97.8847,-0.0001} VR : Locura Distribution Sales

Welcome to Digital engeneering Are you someone that like to do LUA, but do not like to build? Or you just need a nice building to work in with your LUA scrips, and then show a new script for the consumer? And even sell the scrips on the main floor. Then is something for you.

Tired of pads being too small for your need? Zealot Company has your needs covered with this quadcore landing pad! It has a complete interior for your storage needs and elevators for mobility around the structure. Stop by for an in-game look at ::pos{0,2,-23.5467,16.8591,36.0142}, you can purchase the bp at ADMI Build Store at the Zealot Company dispensers. Note: Due to the snap tool not overlapping element with voxels each pad has its own set of elevators, some will need to be deleted, if you want and then centered.

Another Star Wars Galaxies tribute build dedicated to the countless hours spent waiting for the shuttle. Comes in two versions, dynamic is Tatooine coloring, Static has Imperial (dark). Pairs perfect with the 'Tatooine Trading Post' https://du-creators.org/makers/MrLightWell/ship/SWG%20Tatooine%20Trading%20Post

Tired of hanging your ship in between the mining units every few days you visit your gold mine? Why not land in style on this luxury M-core landing pad? The top is flat for easy landing but below the real magic happens. On a lower deck, connected with two smaller cores your mining units will be waiting for you. Easily accessible with two ramps from the flight deck or by teleporter from the ground below. Be in absolute control as you calibrate up to 15 mining units without moving a single step, and before you leave have three Large containers at your fingertips to gather you hard earned ores. If you feel like getting your hands dirty you can use the access hatch to drop down to the bonus ores awaiting pickup. A quick elevator up will take you directly to the the flight deck, onwards to the next stop. If you are really in a hurry, all containers and Mining Units are also in reach from one area on the flight deck. The long and stable legs will make placing these cores a breeze, even on hilly ground. Instructions: Place M-core with the middle edge of the mining platform in the exact middle of three tiles. Then place the Left hand S-core, finally the Right hand S-core. If you mix up the order, it will give a nasty one voxel gap. No returns. VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

Landfall pads as used in beta (large static core) has small and xs core landing zones lined out. Located on alioth at new store. VR "ADMI build store" position ::pos{0,2,-24.6313,16.8071,150.4663} for landing zone at store. thanks for looking updating builds as i can questions ask emladra#8532

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

ETA Mining Platform Easy Cheep and better then nothing. BP requires 4L containers 1 Hubs 8 Square light s 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

50% off blueprint price at the moment on dispenser A stylish workshop for building XS,S,M core's, plenty of room for deploying your voxel library cores with storage on platform and plenty of freedom to customise your workshop inside like copy and past all your voxel librarys to the inner walls and corners of the workshop for easy access for when your building, placement rules are 1 click down and the enterances are facing you when u deploy the BP you can check it out in VR search for loaded industries showroom for anyone that purchased before 7th may please let me know and i come and release the drm on your building

This is the IC small core storage and industry building. There is enough room in the bottom for 6 10 stacks of large containers and some refiners or other industry. It includes 4 hub stations and screens and programming boards up to for easy inventory (Lua not included). It also includes a mesh floor for easy moving and linking of elements from the hub area.

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.