Dual Universe Creators

The Scissorswift Courier is a light personal transport made for speed and aesthetics. Built around a medium rocket, it can bust out some serious acceleration and speed for as long as your xeron lasts. It can carry a little bit of cargo if you need to pick up a few things from market(33kL). The 'Scout' version is a space-only patrol ship with 18-22g accel (space thrust - no rocket) and 48,000kmh max speed. With only a XS shield, a couple of S cannons, and a S stasis weapon, it's not going to be winning any fights. But it could pop a XS miner no problem. ;) BP dispenser located on Haven at - ::pos{0,27,6.9482,-70.8985,249.7016}

Silver Bee is the ship I made to run around in PVP space (its the ship I can loose) its not really finished as it needs some balancing however, we are at the end of Beta and I'll probably make an xs ship variant instead of finishing this ship off. Despite not being finished it is quite a fast ship able to exceed 40,000Kmph in space, in the atmosphere it can reach speeds of up to 1050 Kmph without burning up in the atmosphere (Angle dependant). This is also the second revision of the ship as it started out looking more like a normal plane before I decided to make it look more like a Bee, though my voxel skills are not really up to the task.

Dot Interplanetary presents the original Dot Hermes v1 that was produced, two years ago and is finally released to the public. Ship is equipped with 58 large atmo engines and 6 XL space engines. Because we are releasing the Dot Hermes v2 the same time, we are only charging for the cost to create the BP. Pick up your Dot Hermes today!

This is the FLYING VERSION with Swoop Garage - *STATIC MODEL available here: https://du-creators.org/makers/MrLightWell/ship/Mos%20Eisley%20Cantina During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. I didn't want static limitations for my next creation: the infamous cantina from Star Wars: Episode 4. I'd make a mobile version, and remembered the various mentions of 'Swoop Racing' from the years of playing games, reading extra lore, etc. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. You can come enjoy 'Lightwells Mos Eisley Cantina' in VR anytime, (Or pick up a copy of your very own!) it and many other builds at LSA INDUSTRIES have been made for the enjoyment of the DU community, Cheers everyone! *Images show the 'bury test' from beta - one consideration people may want to remember is that the unique advantage of DU's terrain allows for realistic application of sand or whatever over top of the build, especially the dynamic version shown in the test- you can effectively bury the flying version, and hollow out a small entrance for the garage. Just one more option for those who may want to dig it out and fly it again in the future.

Support-1 is designed for mid-air rescue and salvage operations. It has vertical thrusters to be able to hover in one place without using anti-gravity generator, because those are expensive, huge and heavy! It's M core, so you can easily tow S and XS core ships with it. There's a nice landing pad that can fit most S core ships easily.

A nice looking decently balanced warp shuttle weighing around 770t with full fuel load; cargo capacity is relatively average. Comes equipped with a bench over the warp drive for passengers as well as VR and res facilities.

Ikarus industries presents the XS core Jumper MK3 Small and cheap jumper to get you around the system. At 113T full of fuel it will only cost 4 cells to get to Madis from Alioth. The jumper is equipped with two medium uncommon military Atmo engines and 1 med uncommon military Space engine. 2 XS space engines to help you land on asteroids and space stations. 4xs basic containers to have a little cargo if you need. All stats are with tier 4 put downs and pilot skills. Atmo put down at tier 5. Come and check out the Jumper MK3 in VR at Ikarus ship showroom. Showroom is on Madis will get a Alioth outlet store up in a couple of days.

Happy Valentine's day! Limited Time Valentine's Day ship. February only! Pocket Ship. VR: DJ Showroom. ::pos{0,2,22.4361,87.0590,117.7624}

2 L container cargo ship

In Gold and Black this Hauler is beautifull to look at and also does have the power to pack a lot and bring it to wherever you want it to. It goes up to 26 036km/h in Space It can be eqiped with a AGG, Warpdrive, Shields or a DSAT. Just reach out to me if you are interested. Or use the VR Port "16t"

Smal starter Ship for Savezone Hauling and Travel Basic Engines Most Items and Honeycomp easy to craft in Your Nanopack!! Low Fuelcost with LvL5 applied Engines/Brakes usw. Additional: M-FuelTanks M-Container in the Front (+64kl) Warp can be Installed Wepons and Shield On Sanctury MTI Factory: ::pos{0,26,-31.3143,-55.1762,-0.0000} On Alioth: comming Soon

Space Ark Industries [SAIN] Introducing the first ship in the fleet, the Pocket Racer MK1. The Pocket Racer MK1 is based on the Finglider MK1 ship. The difference can not only be seen in the design but also that everything can be built in the nanopack. Quickly manoeuvrable and also compactifiable, so it can simply be checked in in your luggage if you fly to another planet with the shuttle. To the data At around 500km/h, the 100L tank lasts around 20 minutes It's just for the atmosphere cheap to build No cargo BP price 100k

The "Crane VarA Mk I" is an atmospheric Pocket Ship. It travels with up to 1,700 km/h, depends on Elements and skills. The ship contains: 1x Atmospheric Engine M 2x Atmospheric Engines S You can look at the ship in the Surrogate VR "LUF Showroom".

Tiny disposable asteroid hopper matching the design philosophy of The Ray (https://du-creators.org/makers/mark-o-solo/ship/The%20Ray%20Executive%20Edition). The hopper comes with all necessary equipment for asteroid mining sessions, all while remaining minimalistic to the core to allow quick reassembly when unplanned spontaneous disassembly might occur. In particular, it is equipped with a Archhud autopilot, VR pod, radar and good lighting. A large space engine allows for rapid recovery of the mined goods. Where to find: The Hopper is currently exposed alongside The Ray at the Dome, with AngryDad's kind permissions ::pos{0,2,35.9876,105.1131,0.0000} VR: The Ray Executive Serenity Shipyards also offers customization and individualized Editions, please contact CEO mark-o-solo (Discord: god#0275) for development. Yours truly -mark-o-solo, CEO Serenity Shipyards

Build by Knight-Sevy#6239 The TIE Fighter was an starfighter that was part of the TIE line manufactured at the Sentinel shipbuilding industries. It is built in such a way as to be as close as possible to the real scale while adding the "DU" dough and as detailed as possible. Real cockpit accessible through a hatch at the top. Sold with 400 L of fuel and 400 XS Tier 3 ammo. You need "Control Unit Capacity Handling" at lvl 2 to use the 2 laser (Weapons => Seat Capacity Handling => Control Unit Capacity Handling) And then apply them on your construct (Right clic => Construct => Reapply talents on construct) BP dispenser located on Moon 4 at - ::pos{0,22,-24.0681,158.4720,64.3307} To view in person, visit VR: " SNS Showroom Public DSAT" The TIE fighter is ideal for fun / trolling in space combat in Dual Universe with your friends. All Star Wars fans should at least own one ! https://youtu.be/g9l4cbuoh7w No talent max stats : 5.70g MAX THRUST 12.2g BRAKE FORCE