Dual Universe Creators

Medium core variant of the Deluxe pads at the store location they use the same type of voxels the ones that where built where in a different color to show the flexability of the pads as far as matching whatever you want to use them for. The pads in the pictures are a grouping of 6 pads set to a center 7th core that a customer wanted. Enjoy!!! p.s. bottom stem can be deleted if not wanted so just the walkway and pad underneath up to you! VR ADMI temporary store to get location and dont buy in vr.

BP dispenser located on Alioth at ---> ::pos{0,2,24.6416,120.5044,3.8850} That building is in an L Core. I don't like the huge factory blocks at all, so I took an L Core and gave myself free rein in the dimensions and design of the building. From my point of view, the entire core does not always have to be used. It is important to me that buildings fit in well with their surroundings, be it in the city or in the country. The building is an empty shell! Setting up the factory or your office in the building is entirely up to you. Below the asphalt there is enough space for you to build your own cellar with containers and industry. you can find the core in the center below the floor if you have any questions or suggestions for improvement, please let me know! VR: "Calpone Showroom" dispenser ---> ::pos{0,2,24.6416,120.5044,3.8850}

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

Will be updating store location for release in weekish atm emladra#8532 is available if you wish to purchase anything. Hoping to be setup with new store on madis in a week possibly 2 depending on resources lol. By popular request i have made a medium core based landing pad ideal for small and xs cores in space fits up to fits 2 small core ships and 4ish xs ships plus depending on the size and box these pads help keep ships apart and in there own area nicely! enjoy! questions ask emladra#8532 discord thanks! vr is (ADMI SALES ships and pads) and cords for base are ::pos{0,1,-53.2259,-47.4236,827.1160}

This M Core Factory Shell will fit Tier 1-3 ore refiners and product plus assembly lines. Fits 1 XL Assembly lines. 1 basic or 1 uncommon. Plus a mix of any lines you want. Makes organizing your production easy. Room for all your containers in the ceiling. BP Requires M Core 1 Basic container XS (schematic container) 1 Detection Zone M 4 Elevator XS 1 Relay XS 2 Screen XS 2 Sliding Door M You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000} 6 Square Light M 6 Square Light S 9 Vertical Light M 7 Vertical Light XS 4 Window M

Large Hanger Pick your accent color or Luminescent color glass of your choice when you deploy your hanger. Build Comes Standard with Blue Luminescent Glass. The build is sized to accommodate the XL Gates when you are ready to add hanger doors, admire the magnetic gantry cranes. location: ::pos{0,2,5.1035,163.8590,28.5577} POC: Puunene#4859 VR: Puunene Hangers

- A large core outpost building, with landing pad for medium core sized ships. - A platform to set up your mining operation on 3 adjacent territories, for convenient access to mining units and storage from a single location. - Storage: 6 Basic Containes L (2 per territory totalling 384 kl when fully buffed, more can be added) - Placement space for 12 mining units (4 per territory) 3 blueprints are provided - one for the main large core building, and two additional small core constructs that integrate to the main building. It is important and strongly advised that you refer to the Deploy Setup Manual, as precise deployment of the 3 BPs is essential to enable miners working properly on the 3 territories. Get the manual here: https://drive.google.com/file/d/1VQ1bRl1KgdTca1cO-hZctLboFwJC_NwA/view?usp=sharing Material list: https://docs.google.com/spreadsheets/d/1fYWNOhXSlhMM0Ky4PHIrxpxwJlIues0a5YV4HOhcObg/edit?usp=sharing VR: DSPI Outpost Sales dispenser: ::pos{0,2,41.7116,89.5775,34.7921}

ALL PRICED CUT FOR THE NEXT 2 MONTHS FOR BP'S NO TOKENS AVAILABLE FOR THE TIME BEING "Some vermit alien stole!!!!??? my gas station and dragged it up into space!!!" Its a labor of fun really a simply easy to run gas station with all fuel types ready to pump out for your use in space. No lua no mad scripts just put in your ore and let the machines run and it all just simply works no need to make a large crazy factory for gas. Just keep this beast fed it will keep you flying. I'm not doing tokens and the schematics needed are below. Hope everyone likes it and comes and gets one for themselves. VR to Broken Skull Ship Shop

THE FACTORY EVERYONE IS GOING TO WANT PYRAMID T123 MINING BOT FACTORY THIS FACTORY MAKES T1 T2 & T3 MINING BOTS 6 T1 BOTS EVERY 2 HOURS 5 T2 BOTS EVERY 6 HOURS 5 T3 BOTS EVERY 24 HOURS NUMBERS PER HOUR CAN IMPROVE WITH HIGHER TALENTS LIKE ALL OUR FACTORIES; COMES WITH INGAME AND DISCORD SUPPORT BOOSTING TO LVL 5 AVAILABLE TOO DISCOUNTS ON PURCHASES OF 3 OR MORE FACTORIES TOTALING OVER 20MIL HAPPY MINING!

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Are you looking for a space adventure that combines comfort, productivity and security? Then look no further than the SKY Aegis M core space station from SKY Industries! This is the ultimate space home for you and your crew, featuring: - A spacious and cozy living area with a panoramic view of the stars - A fully equipped office space with high-speed communication and data storage - A small factory area that lets you craft and repair your own equipment and vehicles - A XS core elevator dock The SKY Aegis M core space station is designed to be modular, customizable and expandable, so you can add more rooms, modules and features as you wish. You can also connect with other SKY Aegis stations to form a larger base. The SKY Aegis M core space station is available now for a limited time offer of only 2.2 million! Don’t miss this opportunity to own your own piece of the final frontier. VR: Aegis Haven Space Station Visit ::pos{0,2,54.7335,109.8047,69.0288} to get your Blueprint today!

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

A Lighthouse.... Illuminates your way back home. VR to "Alioth Marina" Drm free in case you want to transfer the Lighttower to your own static core, there are full instructions for configuring the lighting included on an info button

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.