Dual Universe Creators

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

Large core easy to place landing pads very detailed and also very easy to change the colors! The style is setup for the steel and the lum glass to be swapped to different colors to create a color pattern for any area DRM is locked as this is how i fund my habits! VR ADMI Deluxe Temporary to look at and locate on alioth will have a proper store here in a bit after i make more money lol. Located 50ish km from market 13 at cords ::pos{0,2,-24.6313,16.7490,95.7777}. Thanks for looking! I have made roads that are very easy to place and dont get in the way of taking off! will have more styles later.

A Fuel and Cell Station Module on M core Small landing pad on top for S core size ship Control tower with 360° view! 4 corridors to connect other modules / space elevator No machine on the blueprint Lower area has several spots for various industry machines, ie: - rounded area can hold up to 20 containers L - 36 refiners / smelters in angled corners - 16 chemicals / glass furnaces in center can be seen on VR: Aerogics Space Station

Note: Some furnishings in this blueprint require the Art Deco (Silver Backer Rewards) Features: 600kl of storage Once a simple house for servants at the Ivory Island Resort. After new management took over servants were evicted and the housing upgraded to include luxury amenities, staff now commute to work from the mainland. This house includes a new custom art piece that is AI Generated through the use of variables and prompts. Furnishings also include Art Deco pieces from old Earth, that are limited to the most affluent of clients. (Tokens will not be made available)

S Core Storage building Clean up your tile. Place Containers or a small factory inside Pb Requires 1 Sliding door M 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Pyramid Container Factory: OUR TOP SELLER Can run 2 L schematics or 2 M schematics or 1 L 1 M simultaneously. producing 16L or 32 M per day. or 12 L and 24 M. At the same time it will produce S, XS containers @ 48 and 96 per day simple design. Ore in, waste out, product out. everything is container hubbed for easy expansion. READ OUR BIO FOR MORE INFO

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

M core Outpost Pad, the perfect companion for the Outpost Building Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store

Deluxe pads in space on a Large core took a min but its now done the current configuration is red lum glass and black carbon fiber witch is totally epic looking! These 2 colors can be easily swapped when placing to your choice of colors. ( if you see orange steel and lum glass also switch kept trying to find and couldnt) Available at admi temporary store until i finish the official admi store thanks !

Tired of hanging your ship in between the mining units every few days you visit your gold mine? Why not land in style on this luxury M-core landing pad? The top is flat for easy landing but below the real magic happens. On a lower deck, connected with two smaller cores your mining units will be waiting for you. Easily accessible with two ramps from the flight deck or by teleporter from the ground below. Be in absolute control as you calibrate up to 15 mining units without moving a single step, and before you leave have three Large containers at your fingertips to gather you hard earned ores. If you feel like getting your hands dirty you can use the access hatch to drop down to the bonus ores awaiting pickup. A quick elevator up will take you directly to the the flight deck, onwards to the next stop. If you are really in a hurry, all containers and Mining Units are also in reach from one area on the flight deck. The long and stable legs will make placing these cores a breeze, even on hilly ground. Instructions: Place M-core with the middle edge of the mining platform in the exact middle of three tiles. Then place the Left hand S-core, finally the Right hand S-core. If you mix up the order, it will give a nasty one voxel gap. No returns. VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

makes all the basic elements and XL uncommon space engines ,vr MAGIC ELEMENTS FACTORY . location: ::pos{0,2,40.7473,91.6040,93.7875}

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

12 Large (static) core runway 2x6. full built with skirt runway is all at the top of the cores so can make skirt taller if desired to put stuff under it. Will be making another much larger version in the future after i make more quanta! vr Admi build store or visit at ::pos{0,2,-24.6842,16.8702,151.5735} runway is outside the landing zone for display will eventually put the landfall pads around it as they are built for it. Thanks for looking and buying and all that stuff!!!!!