Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Looking for a good start to your gigafactory? This L Static Core balances detail with function - Three floors stretch across the majority of the core giving you the space needed to expand over time. Save yourself the trouble of moving your factory from one core to the next and get started with Cronnus' Large Factory Shell. Example Layout: Floor 1 - Refineries/Smelters/Storage Floor 2 - Intermediary Parts Floor 3 - Assembly Lines Or make this a hybrid and use the first floor as a showroom for a couple ships or dispensers for your products! How to find: - VR - Search for "DSI Dark Forge HQ" (do NOT buy a BP in VR!!) - ::pos{0,2,21.9994,107.1816,6.5935} - Dispenser is here Near Alioth DM7 - Alioth Exchange Market (pending submission - stay tuned!). Cronus#2214 or Firestorm#4004 on Discord if you have any questions!

Warp Cell Cube Design inspired by the famous Mario Bros Warp Cube, this XS Core is packed to the bone with industrial machines and design to have a production capacity of 520 warp cells per day, needing only to feed with the 10 ores required for warp cell production, Pure Hydrogen and the 6 schematics needed for warp cell production. Features: - Capacity: 520 warp cells per day with moderate T1/T2 production talents - Feeds from Ores and Hydrogen, so no need for additional machines (refiners e.g.) - Easy setup: when powered on, all machines will be calibrated to produce the right amount of intermediate products to feed into the 16 Glass furnaces for Warp Cell production - Easy maintenance: elaborate monitoring screen, showing the status of each (sub)assembly being produced as well as the inventory levels of the Ores, blueprints and Hydrogen. - Token available on request, please do expect some time needed for the production of the machines - Support during setup on request (although should work straight from the box) No more need for giant setups for warp cell manufacturing! This XS core is probably all you need for your personal warp cell needs! Location for watching the cube in action: ::pos{0,2,7.7358,80.4968,220.3335} visitable in VR though: Warp Cell Cube Demo

Marina Walkway Set Walkways with handles: - straight - 22.5° - 45° Stairs 45° (Z-axis) Industrial Pillar with attachment for the Walkways drm free VR: "Alioth Marina"

Ikara Industries presents the "Ikara Factory M1" - Elemetns and Script Rework. Produce and rest, then the Ikara Factory M1 is for you. The M core includes - 5 floors for space up to XL machines - 1 basement with the possibility to integrate up to 84 L containers - 1 factory control center with 4 L screen - Door script (RestrictedAccessDoor) provided by Davemane42 - Light Control (ScreenLightControl) script provided by DU_ASTco - Screen Script to set Text to the Lounge and Entry Screen - Large window front - 2 lounges with benches and snack machines. When the production takes longer. - 15 L screens with the Entropy Effect to chill on the top. What else you should know: - Building has DRM - All screens must be turned on once manually. VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got less lag! Sometimes, you just need a big space to set up storage or your own customizable factory layout. I got you. Big wide open modular with tons of space inside. Containers, sure. Factory, sure, dead noveans from your pvp conquests...sure. I'm using mine as a nice place to store my voxel libraries so they're not just out in the open cluttering all my pretty space views. Big L size space on top for landing too. Come see it in VR at "Czar in Space Showroom" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155}

Here it is! The Kombat Extendable Mining Rig, Landing and Launch Pad system. Build with the custom, patented landing deck. This one does not use fussy zero-G technology but relies instead on trusty steel and concrete to keep everything upright. On deployment you can chose your own building material honeycombs (Primary, Contrast, Metal and Lumi). Comes in four flavours with each it's own distinct role: Barrier - (Bp: 0.9M Token: 2.7M) The basic variant is used as a simple but elegant landing platform that allows any M-core or smaller ship to land safely on it. Guided by landing lights and having a nice elevator down to the ground. Corsar* - (Bp: 1.8M Token: 3.6M) This one comes with a hole in the top! But in that hole fits a Medusa Y-Lift capable of lifting around 600tons on Alioth and up to 2Kt on places like Madis without talents. It comes with a nice ramp that allows you to walk up right to the Elevator seat. Kombat - (Bp: 1.8M Token: 3.9M) Ah, the trusty workhorse of the lot. Why not have you landing pad AND do three tile mining all from the same spot? Comes with 3x basic and 1x uncommon mining units but can be extended or swapped out to any configuration. Comes with all the luxuries of both the Barrier and the Corsar but also spots an Large Container to hold all your ore. Can be deployed to service 1, 2 or 3 adjacent tiles from one location. Stugna* (Bp: 2.4M Token: 4.9M) The big boss. Why not combine EVERYTHING? Have a decent landing pad, a launch pad for your elevator AND have access to three mining rigs all at the same time? Place one of these in the middle of a super-flower, add a few containers and do your weekly mining run with your pocket-speeder, dumping all ores straight into the elevator storage, ready for lift-off. Why spend any more time on dusty rocks while you could be sipping a Pan-Galactic Gargle-Blaster back at home and let the Kombat Rig do it's work? * Comes without the Medusae S-Core Elevator that fits the exact dimension. Can be bought separately (Bp: 17M Token: 24.5M). In order to dock in space we highly recommend the Bogdan Space Dock L-core landing (Bp: 3.8M Token: 15.8M). This doubles as an L-core space landing pad and space station. As nice as pictures are, a visit is worth more than 1000 of them. VR over to SVEA Elevator Showroom and cross it to the North, can't miss it. The Bogdan can be viewed at VR: NSS MADIS VR (this one is being developed right now) Please discuss order and installation. I want to do a first installment myself and discuss all the details, then hand over extra blueprints when needed.

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

The Terran X40 MP is a mining plattform for new players. An easy plattform to build and maintain. And easy to check the miners if and when they need to be calibrated. The X40 has 8 basic mining units S. And a M basic container for the ore to store in. This means you can craft the most of the blueprint in your nanopack. Glory to the Terran Empire

Available at Coords: ::pos{0,2,38.9120,109.2847,89.6767} is this beautiful 8-bay mining station! - Plenty of room below to collect ore processed from calibrations - Basic Container M to collect ore, with a beautiful shroud to cover - Shrouded mining units - Easy Access - Up to 8 Mining Units to place, no matter their size - Feel free to VR to MATTENASH INDUSTRIES to take a look before buying Friendly reminder to not buy in VR. Happy Mining!

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

In the process of moving, blueprints are available to Kosmos Exchange. It's Honeycomb...in space! No longer will you need to make element only ships deep in space, put some voxels on it and style that thing up! PvPers, come on, put a skin on that naked hot dog you're shooting with. You can even dress it up as an actual hot dog with the right voxels at your fingertips. Factory is built on my Fidget station technology and features T1-T3 honeycombing capabilities. Easy to use LUA control for the honeycomb machines (html needs to be enabled for T3 due to a technical issue with Aerogics honeycomb script so using SilverZero's older script that still works like a champ). Come see it in VR at "Czar in Space Showroom" either fly outside or head to the small unmarked door on the end with the landing pad sets. Located in person here ::pos{0,0,-41989.3752,202219.7557,33651.8498}