Dual Universe Creators

ON SALE!!! Presenting the space biome. VR vanherck space biome (ive dropped it with black alu and red lumi) BP for only 3 million quanta (token about 15 mil depending on market prices) Dispenser at ::pos{0,2,34.7446,86.1685,223.8382} Stock is low cause bp costs. But you can always give me a shout A Single L core spacestation that is perfect for space station newbies or veterans. The open interior was made so the buyer can fill in the space with whatever he or she pleases. There is enough room since the structure spans the entire L core. It is also symetrical on all 4 sides (not top and bottom) for easy deployment. The Building is mostly made out of carbon honeycomb(matte and glossy) and only some decorational elements like lights and windows. If you want it or have anny questions dont hesitate to contact me Vanherck(ingame) and vanherck#7572(discord)

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

Hadron Mining Platform 4 Designed around our signature Hadron theme, the Mining Platform 4 delivers style and function to any outpost or mining operation. Comes equipped with 1x M Basic Containers and each mining unit housing includes markers for quick and easy placement. The centralized VR station provides instant access to all mining units on the platform without the need to move from the spot. When deploying the platform, make sure the stairs and the voxel square at the bottom of the platform are above the surface of the terrain. This will ensure you have access to the container if you choose to swap it out. The raised platform and circular arrangement of the mining units allow the bonus ore to spawn in a ring around the construct allowing for ease of access when collecting.

In the process of moving, blueprints are available to Kosmos Exchange. It's Honeycomb...in space! No longer will you need to make element only ships deep in space, put some voxels on it and style that thing up! PvPers, come on, put a skin on that naked hot dog you're shooting with. You can even dress it up as an actual hot dog with the right voxels at your fingertips. Factory is built on my Fidget station technology and features T1-T3 honeycombing capabilities. Easy to use LUA control for the honeycomb machines (html needs to be enabled for T3 due to a technical issue with Aerogics honeycomb script so using SilverZero's older script that still works like a champ). Come see it in VR at "Czar in Space Showroom" either fly outside or head to the small unmarked door on the end with the landing pad sets. Located in person here ::pos{0,0,-41989.3752,202219.7557,33651.8498}

In the middle of a move, contact me via discord to arrange a sale. Need easy to set up landing pad in space? Look no further! M core landing pad with 2 tiers and plenty of hidden storage capabilities. Fits together with my fidget stations and other landing pads for a seamless space experience. Too Big? Try my S core landing pad. Too Small? Try my L core BigLandyPad set See it in VR at "Czar in Space" or in person here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

A full functioning Fuel Factory. Just place raw Ores in the containers and add Shemas. And the factory sells the fuel how you adjust the dispensers. Blueprint Dispenser is inside the Fuel Factory to find ::pos{0,2,21.5954,103.3399,0.5821} For futher Updates or bulk interests contact ingame "Olivilo" or "Samsara" or just write in Discord. Have a nice day.

50% off blueprint price at the moment on dispenser loaded industries presents large core space landing pad, this is the same as my ground version with basement thanks to daddyshark for doing the conversion for me, you can easily add these to any other building you have in space just square up the blueprint and do 2 clicks down when level on the core your stood on or just place in space any where you like, dispensor can be found at my base

A Fuel and Cell Station Module on M core Small landing pad on top for S core size ship Control tower with 360° view! 4 corridors to connect other modules / space elevator No machine on the blueprint Lower area has several spots for various industry machines, ie: - rounded area can hold up to 20 containers L - 36 refiners / smelters in angled corners - 16 chemicals / glass furnaces in center can be seen on VR: Aerogics Space Station

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

Built in the same theme as my #1 selling L Core Factory. 3x's the room and still includes the full L core landing pad on top for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

PYRAMID SHIP PARTS FACTORY: A SHIP BUILDER'S DREAM! MAKES EVERY SHIP ELEMENT EXCEPT ENGINES ENGINE FACTORY COMING SOON ALSO MAKES PROGRAMMING BOARDS AND DATA BANKS HAS EXTRA ASSEMBLY LINES TO ADD YOUR OWN EXTRA PARTS THIS FACTORY IS A BEAST! DONT MISS OUT! OUR SCREEN FACTORY IS A GREAT COMPLIMENT TO THIS FACTORY LIKE ALL OUR FACTORIES; COMES WITH: INGAME AND DISCORD SUPPORT. ALL MACHINES ARE LABELED TO MAKE SCHEMATIC PLACEMENT A BREEZE. ALL CONTAINERS ARE HUBBED TO MAKE ADDING STORAGE CAPACITY A BREEZE TOO! ENJOY! CHECK OUT OUR BIO FOR MORE PYRAMID CO INFO

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.