Dual Universe Creators

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

UPDATE now available in new release. Just came back to the game, prices may be negotiable contact me in game or on discord Vazrik#6937 *4,000,000 per core, Not including materials. Recommended Galvanized gray aluminium and Luminescent White glass. 4100 honeycomb single voxel thick per core 8200 honeycomb double voxel thick per core 1 L core per core Roughly 200 Luminescent glass per core (may vary but its a good starting guestimate) *Custom built to match your current setup. *Accurate runway measurements and markings(doubled in size to increase visual and utility) *Recommended at least 16 cores in length, 13 cores in length is minimum for this design. Redesigns are necessary for anything smaller, this may be possible to achieve but will be at additional cost. *Can add taxiway's or possibly parking pads if needed, should be no change in price per core depending on the request.

Roads for the ADMI Deluxe Pads easy to place and easy to change colors for! Location is the same ::pos{0,2,-24.6313,16.7490,95.7777} as the pads and vr.

Own a Warp Beacon of your own - Then make one , in this faithful recreation of the must have strategic element. Get the Bacon cooking ! With DIA customised industry, storage and schematics monitoring and IC industry AR HUD scripts, incorporated into a modern stylish command room, you'll know precisely what you need and when you'll get your coveted beacon. Configured to be able to produce two beacons per month, all machines and storage are linked and signed with what to produce and appropriate maintain levels. Come see the wonder at the DIA Plaza and find the BP dispensers in our Showroom display. For those not interested in cooking bacon, but other tasty treats, get the voxel shell to build your own factory into - only 20Mq

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

Will be updating store location for release in weekish atm emladra#8532 is available if you wish to purchase anything. Hoping to be setup with new store on madis in a week possibly 2 depending on resources lol. ( X2 blueprints per purchase!) A small core version of my outpost miner this one is the mini! is a small core design that has room for easy 10 large containers in building the bp only has 2 placed and only 1 basic L autominer placed. Has 6 slots total for the autominers in case you wish to add more later uses just 970m of voxels so easy to construct all aluminum so as to be easy to build and quick to place. the skirt around the edge is rather tall to help place it on uneven terrain and still look right. The 1.5 mil buys you 2 of the mining units bps so just in case you mess up placing one you still have another! thanks for looking and let me know if you have questions about it! emladra#8532 all of my stuff is available on madis at cords- ::pos{0,1,-53.2259,-47.4236,827.1160}

Mining Outpost with independent fuel production. VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

Modern, spacious and affordable accommodation. The balcony style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony of the 2nd floor provides a great cover for several personal speeders, protecting against casual collisions and weather, should the environment be a little rough. Built on the lowest of the constructs grid structure, this spacious condo provides ample opportunity for further expansion upwards, should the new owners wish to add on a 3rd floor. With big windows and a front and back balcony, one can always enjoy spectacular views, while resting in comfort. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

L core Modular Space station with a Atlas L core Elevator docking cradle (it can dock other elevators with small modification) , you can easily expand the station with additional modules like the SKY Aegis SPC Dual PAD Visit at VR: SKY Aegis SPC Core Atlas Blueprints available at Alioth: ::pos{0,2,54.7335,109.8047,69.0288}

Full L core space station perfect for your space factory. With 4 landing places (M cores) that perfect Align with the main factory. I can help install everything. The inside is empty. Discount if u buy more 2 for 15 mill 3 for 20 mill 4 for 25 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

A full functioning Fuel Factory. Just place raw Ores in the containers and add Shemas. And the factory sells the fuel how you adjust the dispensers. Blueprint Dispenser is inside the Fuel Factory to find ::pos{0,2,21.5954,103.3399,0.5821} For futher Updates or bulk interests contact ingame "Olivilo" or "Samsara" or just write in Discord. Have a nice day.

Shop station A nice looking round station that is perfect to build a shop in it. Can also serve as a storage place. And u can make it very easy custom because i dont touch the side of the round parts. -fits 144 L container! Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

We proudly present our first static entry under Prometheus first fire. Made by Vorkan and DotHack, this space station is built on a L space core and has all the accommodations you need to live into space and do all your activities. It also has a lot of space under the large landing pad to suit your factory needs and expand as you like. You want to relax after some asteroid expedition or any PvE/PvP adventures? Go take a breather in your personal sky bar that will surely give you the best view. Comes with: 1 L landing platform 4 S landing platforms 1 fuel factory 1 maintenance unit 1 DSAT 8 Expanded XXL containers as main cargo (plenty of place to put more) 4 L containers for the fuel factory all the factory elements needed for the functioning of the fuel factory All elements included in the BP. BPs available to buy in several locations: ADMI build store VR: ADMI build store (go to the Prometheus first fire floor at the top of the structure) Coordinates - ::pos{0,2,-24.6842,16.8702,151.5735} Paragon Hex showroom VR: Paragon Hex Showroom Coordinates - ::pos{0,2,35.3441,107.0564,-13.1840} Vega Industries (coming soon) VR: Vega Showroom Coordinates - ::pos{0,2,-22.4597,13.9911,-0.0001} For any questions, contact vork on discord