Dual Universe Creators

A landing pad on L core. Built on top of core, with a bit of margin so you can still place biggest elements and / or build a bit, and expand underground. Easy to place with its big pillars Can be seen on VR: Aerogics L Core Landing Pad *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Yellow Plastic: lines on landing area Luminescent White Glass: inside lights Luminescent Yellow Glass: outside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

XDM tower is a 3 L core tall stack, 258m tall to the roof, and 333m to the very tip. Featured in the outpost museum. Contact: Actimist#4020 Primary designer: MadManWithABlueBox Contributors: Sinjin Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

ETA Mining Platform Easy Cheep and better then nothing. BP requires 4L containers 1 Hubs 8 Square light s 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Back in beta I began piecing together a static L-core for my large Tatooine city project based on Star Wars Galaxies/Battlefront - Now you can enjoy it as well! Everything is an original version or elaboration based on the old school style. FEATURES: • Main trading hub building • 3 Custom workshops/houses • Speeder/podracer parking • Two XS-sized landing pads • Negotiator's Patio/Lounge • Junkyard • Defense Turret (Has 1 M, 2 S containers within) • Unique decorations: moisture vaporators, display carts full of commodities, (Entry sign reads 'Trading Post' in Aurebesh-font) • Space for additional buildings, alleys, yard decorations, the possibilities are endless! ***SWAPPABLE DYNAMIC PIECES: Blueprint includes most everything shown in the sample pictures but the central 'City Shuttleport', 'Bazaar', and 'Vehicle Garage' are optional sold-separate dynamic (or static) cores. This gives you even greater power over your city as you can change out the look/feel of different areas on the fly without having to copy/paste things. ***Screen images, Art, Logos -Hutt Clan Logo assets.prod.novaquark.com/54643/5f222890-c181-4cb6-8e41-921b6e3fa1a3.png -Flag of Tatooine (twin suns) assets.prod.novaquark.com/54643/897fa331-4dd1-4635-9f97-1803b38385c6.jpg *Blueprint will include extra 'fluff' details on the carts, dispensers, or additional polishes as they're added. I can't remove dispensers from main hub due to a bug NQ is trying to fix so for now what I have is what everyone else gets but you can choose to not spawn dispensers in now with the optional system.

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

Deluxe pads in space on a Large core took a min but its now done the current configuration is red lum glass and black carbon fiber witch is totally epic looking! These 2 colors can be easily swapped when placing to your choice of colors. ( if you see orange steel and lum glass also switch kept trying to find and couldnt) Available at admi temporary store until i finish the official admi store thanks !

PYRAMID T1-3 REFINER+FUEL FACTORY This factory does just what it says. Also makes nitron and X1-4 fuel from byproducts and 2 adjustable transfer units to control how much is made. 8 basic refiners to keep up with most schematic demands. Easy use: Ore in, Waste Out, Product Out format All container hubbed for easy expansion! READ OUR BIO FOR MORE INFO

This will Produce with no indy boosting talents every 24 hours: Uncommon Assembly Line XS 240 Uncommon Assembly Line S 60 Uncommon Assembly Line M 15 Uncommon Assembly Line L 3.75 Uncommon Assembly Line XL 2 Uncommon 3D Printer M 15 Uncommon Chemical Industry M 15 Uncommon Electronics Industry M 15 Uncommon Glass Furnace M 15 Uncommon Honeycomb Refinery M 15 Uncommon Metalwork Industry M 15 Uncommon Recycler M 15 Uncommon Refiner M 15 Uncommon Smelter M 15 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

A mining rig with style - instead of floating mining units everywhere. Space for eight mining units + L container. Mining unit output accessible via elevator to basement area. Mining units not included in BP - place them separately. VR: Deeh Store (dispenser inside the building, 2nd floor next to elevator; turn left when entering 2nd floor via stairs) If you have questions, don't be shy - contact me on Discord!

When not crashing into the ground at 5000km, perhaps you'd like a place to land nicely with a touchy of style on something that's super easy to put together? Sounds like CzarsLandyPad might work for you. I like the looks, my mom likes the looks, my dog thinks it's stylish, and my goldfish can put it together. Customizable from XS size all the way to custom multiple core sizes. As a perk, when assembled, a landing pad can also house all kinds of stuff inside....yes, inside! Tall enough for a large container which we all know can house many dead bodies from your pvp conquests or imagination. DRM free It's on an XS dynamic core so you can put it anywhere and even dock and transport. Come see them in action: Alioth Space VR coming soon

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

Simple Mining Outpost VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}