Dual Universe Creators

Hi ;) I present you the bpac, full atmo compactable vessel BP dispencer at this position ::pos{0,27,13.7133,23.1457,54.8997} U can visit me with this VR baxtonAeronotics have fun

Designer: Destrin ODY's classic everyman ship. Capable of carrying 500+ tons to orbit, this hybrid ship flies like a dream. Get a Rat to call your own! Contact an ODY Staff member in the #trading-public channel of our Discord discord.gg/4CYKDhM8Jq to buy your ships. Disclaimer: As always, performance can vary based on pilot skills. Tests for this ship were performed with tier 4-5 pilot talents and tier 4-5 buffs.

The Swooping Swallow is a tailored autopilot mission runner. Carry up to 5 packages for the 160kℏ Ailerons mission. Flight time 4m 30s for a single package, 4m 55s for 5 packages. Pickup, Dropoff, Home, and altitude are customizable and precise. Blueprint available at ::pos{0,2,42.5991,94.4443,189.7354}

//!WARNING!// //File System Error// //Unexpected Link Termination// //Recovering ... ... ... ...Recovery OK// //Opening File//

The Belovator is a lightweight shaftless space elevator that flies along a gravity line to transport your cargo and players into space. You can comfortably transport your assets from the planet surface to a space station without having to rely on an annoying AGG tower with an hour-long ascend or fiddly autopilot ships. Load up with cargo, select the target floor, wait, dock - unload! Belovator M: - 5 kilotonnes of cargo lift from the surface of Alioth without any piloting skills/talents - 10x Basic Container L - Uncommon Engines It has less than two thirds the engines of the Belovator X, and being uncommon engines rather than advanced, this Belovator is much cheaper to place. You can easily upgrade this frame yourself and have it grow with your enterprise. The voxelframe is identical to the Belovator X, and all slots for additional containers, tanks and engines are marked or easily identifiable. It comes with the same amount of brakes and adjusters as the Belovator X, so you only need to add thrust, tanks and cargo space. Feel free to contact us anytime if you need assistance or have questions about this process. Stats are for unskilled pilots, cargo lift depends heavily on pilot skills. The lifting capability improves dramatically for a pilot with just lvl 2+ talents on atmo engines. The configuration of the elevator is done via Lua parameters and is limited to a few parameters to keep the complexity simple. Control of the elevator via touchscreen and/or HUD with very few buttons. Blueprint Dispensers available at: Alioth Exchange (Red Hall) ::pos{0,0,-18727.2003,113457.0318,-74341.2089} SPPA Alioth Showroom ::pos{0,2,34.3389,111.0206,0.6303} You can also take a look at our space elevators at our WIP Showroom on Alioth. Surrogate: SPPA Alioth Shop If you want to test one of the Belovators in advance, contact us in Discord and we will give you access. If you have any questions or need support, feel free to join our Support Discord. There we provide a FAQ, how to set up your Belovator properly and how to place a spacecore with correct alignment to the elevator. https://discord.gg/MbRPe8GujN

The pride of C.L.A.T. Revan is a monster hauler and leisure craft with 10 large containers. If youre looking to travel the Verse in style look no further than the most capable craft DU has to offer. a Hybrid of a SWTOR Fury Interceptor and a nose changed to allow non marketization penalties.

Easy to handle and fast, perfectly balanced. Simple and convenient to build. This ship allows you to scan the entire safe zone with a very small investment. Great for DSAT or as a small hauler, with a container M provides enough space for a good load. Talent level at least 3 recommended BP: Dispenser location in Alioth. :: pos {0,2,13.8418,104.1626,23.9106} TOKEN including the 3 scanners. PM me

The E1 Spirit for your consideration is an executive hauler for you and your friends in style. The cargo variant the c1 is still under construction. Medium core 1-2kt hauling capacity depending on flight talents. Dothack (vega) did the outside of ship and Emladra (gray) did intiriors. This is a Prometheus build or colabaration. Uses rare engines for good thrust and lift enjoy! was super fun to make!

Zenith is a low cost warp ship, that is able to pick up some cargo with its 10 small containers. Zenith is also over engineered with space / atmo brakes, so you will have the extra safety when needed.

Black Icarus is my first supersonic heat-resistant ship build, it's cheap to make, but packs a punch! It's designed as fast travel ship as it can do 3000+km/h in atmosphere without taking heat damage. It uses specialized heat shield to prevent heat damage, see it in action on youtube: https://www.youtube.com/watch?v=Kps0fKjOGPo This ship is good for running your daily errands quickly! It has enough cargo capactiy and lift to be able to carry stuff from/to markets and you can also do some surface mining. it takes 30-60 minutes to fill the cargo with ore when surface mining (depending on areas and talents) and that's something that most people are willing to do and this ship is perfect for those runs, it can circle entire alioth in under 10 minutes. It's not perfect as this was my first supersonic ship and you might break a wing or brake here and there, but just take it easy and you'll be fine. making sudden / sharp turns while going supersonic can cause more damage, so when going supersonic, keep it as steady as possible. I highly recommend custom hud with altitude hold capabilites, because it's most effective at about 1-2% atmo, you can keep throttle at about 10% and it will go 3000+ easily, while barely spending any fuel. I used this ship for my daily errands for a week before i had to refuel. It's rather cheap to build and uses all the basic parts. NOTE - i have NOT tested cargo lift, but based on stats, it should be able to do about 1200 tons depending on talents. I think most i ever did was 700t and it didn't have any issues.

=== Rebellion === "When an affordable ship actually performs better then most expensive ships out there, it might be a Rebellion... " The Rebellion is a ship created by Hagbard and Chewie_1. It was one of the most popular ships during Beta. It can be build without having to invest a fortune and is an ideal ship for new and experienced pilots. The ship technology and Lua was done by Hagbard with efficiency and performance in mind The great High Quality Voxelwork was done by Chewie_1 using the 2d voxelplaner gifted to the community by jaylebreak. It has includes a warp drive, uncommon Atmo engines and a Shield S. Free Boost to my placement skills if you visit Hagbard on Alioth. - Atmo/Space/Warp capable - 300-1000 tons of cargo depending on pilot and placement talents - fast, light and designed to be as efficient and easy to fly as possible - Features Hagbard's flight control script with brake assistant Alt hold and tons of other usefull features Oct. 20th 22: The DU Player Kukacha created a parts list to help player have an easy overview on which parts to get: https://docs.google.com/spreadsheets/d/1SC6omX1ykK6Aef5Pq0dxvJCkHTPk-JDOBHxrO-BM-_c/edit#gid=0 Update Rebellion 2b ( Oct 14th 22) ==> Updated for DU Release version. No overlapping elements, fully equipped BP, so that you can decide when placing which elements to actually include. You can place it without Warp,Shield,Canopies,Lights,encampment chairs, screens,Lua Board, Database,landing gears to save time and quanta if you prefer. For now we cannot offer this BP for free anymore, so we tried to make it affordable and are offering a "release discount" of only 1.5m Quanta for a limited time. Important Note: The Lua on this ship was designed for Input Scheme Keyboard and any Mouse controlled input scheme is NOT supported! ==== Some features for the included HUD ==== - Full Autolevel in space and Atmo -- In Space choose to autloevel based on nearest planet gravity or choose your own "reference" by pressing a key combination and keep the current leveling -- when entering the pilot seat in space, the current orienation will automatically be used for autoleveling - Altitude Hold/Orbit Hold seamless transition from alt Hold to orbit Hold just by changing target Altitude -- Fully Automatic re-entry from space to atmo - Adaptive engine thrust. By default fly with ultra fuel efficient Maneuver engine and hovers. When needed (or manually activated), additional military engine and vertical boosters will be activated automatically - Collision avoidance -- when in AltHold and ground is detected, target Alt will be adjusted automatically -- when falling towards ground and descend speed is too high in the last 100m, brakes and vertical boosters will be used automatically to slow down descend speed - Can be "flown" underwater. - Speed Limiter saves you from heat damage automatically - can be flown by using A/D,W/S and throttle controls only. The ship will control the roll axis (Q/E keys) automatically to avoid sideways drift and allow smooth cornering - Non obtrusive HUD avoids visual on screen clutter -- optionally press Shift Alt 4 to display all HUD Widgets when needed - Vertical Boosters present but will not consume any space fuel in low load situations, Boosters will be activated automatically when high descend speeds are detected near ground - Display of brake distance to make your space travel easier The rebellion was build to make it upgradeable. - The 4 main engines can be exchanged with higher tier variants easily. Just make sure that those engines which should be "off" by default get an engine tag "2nd" - The rebellion has space reserved for a shield generator s == Waypoint Mgmt System ( since 1f) == The Rebellion 1f has >180 built in waypoints included in the LUA. Press Alt & Cursor Up/Down to access the Waypoint selection The wapoints are organised in groups. Skrip to the next group using Alt & CursorLeft to go one group forward or Shift additionally for backwards. == Using custom your own Waypoints == you can create a small Lua file on your PC to define your own wapyoints in the HUD. The file has to be placed in <Dual Universe Install Dir>\game\data\lua\ Filename has to be poilist.lua Here is the a sample file content: -=-=-=-= cut here =-=-=-=- local poilist = { version = "Poilist 1" } function poilist.loadLocations() p = {{}} p[1] = {"Hagbard","Showroom", "::pos{0,2,37.9534,63.5323,7.9565}"} p[#p+1] = {"Other","Chewie Base", "::pos{0,2,9.4456,45.4257,108.8897}"} p[#p+1] = {"Other","Yobbous Base(must see)", "::pos{0,2,39.3317,21.6829,87.5876}"} p[#p+1] = {"Other","Hedronic Library Teoma", "::pos{0,8,1.5059,133.7962,99.1187}"} return p end return poilist -=-=-=-= cut here =-=-=-=- Use that as a template to create your own POI list. Fell free to add more POIs as needed. The parameter Order is "group","Name","POSstring" The display name in the UI will be Group-Name BP's will be made available again soon(TM)