Dual Universe Creators

*Updated 11/1/22* Now includes Jericho's MU-Monitor Pre-Installed. Simply add MUs and link them to the programming board to see all info on one screen!! New BPs Available at D4nkWorks Showroom These are Long-Term Mining Towers with space for 8 Auto-Miners Designed to fit ANY terrain. The bottom of the tower can be sunken into the land as far as needed and has ladders for access from the ground. Add a surrogate pad and you can easily VR there to calibrate your off-world tiles. The landing pad on top fits S core ships easily and provides EZ access to all 8 miners and the Hub. Landing activates the screen which shows how much ore is currently available. LUA included. Basic Mining Towers have space for your Org name on the side to let people know who's mining in style!

Marina Walkway Set Walkways with handles: - straight - 22.5° - 45° Stairs 45° (Z-axis) Industrial Pillar with attachment for the Walkways drm free VR: "Alioth Marina"

S Core Storage building Clean up your tile. Place Containers or a small factory inside Pb Requires 1 Sliding door M 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A1 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Features: The Ta'veren Mega Factory is a fully modular, easily-expandable, space or static factory BP for those of you who want to link up a machine to print an end part. This factory is set to produce all components for tiers one to four. All parts with multiple outputs are designed to cycle contents. If you need more links, simply add a new box and transfer unit, remove the link from the topmost box to the bottom transfer unit, pointing to your new transfer unit, whose output goes to your new box, and link the new box to the bottom transfer unit. If you find it isn't producing as many parts as you need, simply add a new machine on top of it and have the output go to the next box. All industries are named with what they produce, as are the output boxes, so you can easily identify where things link. Color coded borders surround industries with what Tier. Also comes with DU-Locura-Storage-Info for ores and IndyHUD for your industry monitoring.

welcome to the redlined showroom, this showroom is on a large static core you can visit in VR search loaded industries showroom, it has 2 very large showroom floor space 1st and 2nd floor to display your ships etc or can even use for just about anything you like,

PYRAMID STORAGE ROOM: DONT WANT TO LINE UP 100 CONTAINERS? DONT WANT TO MESS WITH SCREEN LUA? THIS MIGHT BE THE THING FOR YOU! 100 L CONTAINERS PERFECTLY STACKED AND LINKED IN STACKS OF 10 TO HUBS WITH CONTAINER MONITOR LUA. ONLY 1MIL QUANTA ENJOY!

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

Custom UI driven Advanced Weapons Factory capable of crafting 64 weapons simultaneously at max efficiency. Schem monitor/factory monitor also preinstalled.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

Update 2.0 also i trade for ore on bps so if you dont want to use your quanta i trade for ore. There are 2 versions of this one with 5 containers placed as in picture for reference on placing and one without both are the same price. Available at alioth vr "admi build store" for location and such will be building onto this location as time goes foward and sales too lol.

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

M-Core factory shell.

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.