Dual Universe Creators

--DU creators website is very bad i got hacked do not trust it-- All likes removed from my ships In the closing weeks of DU’s beta phase, I spent many days producing this industrial warp hauler for us all to enjoy post launch. Using a source image found online, I carefully created the Hyperion in stunning detail. The key was to remain faithful to the concept art and achieve a performance that would rival any ship in its size class. The appearance of this full size S core might deceive you, but rest assured, the handling and capability of the ship will not disappoint. Utilizing 5x Basic Container L the Hyperion can comfortably handle 1KT worth of cargo to and from a 1G planet. This is not the hard limit as with good flight talents and a seasoned pilot, the ship is capable of more than double the recommended weight. The Hyperion PRO comes equipped with 8 Advanced Military Atmospheric Engines and 6 Advanced Safe Space Engines instead of Basics. This is the only difference between the versions. The Hyperion is intended as a warp capable hauler for moving large amounts of cargo efficiently. A shield is included in the blueprint, however, it is not recommended for use in the PVP zone as it has no weapons by default. All engines can be swapped out to increase performance but you can find the recommended engine loadout on the Hyperion PRO (rated for 2KT). Please note that exceeding the recommended weight of the ship may cause brakes and wings to underperform. The inertia matrix has been fine tuned to negate as many unwanted rotational forces as possible, even under extreme load. Once again, I have installed the open source LUA for container content information and element status (coded by Krengus of ASTCo). For the flight script, I opted to use Arch HUD by default (made by Archaegeo). as it provides a clean, customizable interface that is effective at displaying all the information you need as you focus on flying and it has everything you need. Last but not least, a special thanks to everyone who supported my work and helped me achieve everything I have in the last 2 years. If I made a list of names then it would be longer than this description and I’m sure I’d miss a name or two unintentionally. I hope you know who are and post launch, we continue to share many more laughs, knowledge, stories and ships! Many thanks and enjoy the Hyperion! // For any information or Token request contact me on discord Captain Harlock#8115 - FinalX#2672 or RyanPryde#8917 - Midacre#3312 // Tokens are available! (upon request) Basic version 20 million quanta Pro version 40 million quanta New 1.4.16_x version updates to lua to work with current version Shield script updated still manual rgb Ship info updated still manual rgb Arch hud updated The basic and Pro version Blueprints will be sold separately All the Buyers of the basic version the can get a Pro version Blueprint for the half price All the elements are buffed with LvL 5 talents! All my blueprints have 50% discount included in the price till the end of the month! VR: Kosmos Public DSAT Showroom Dispensers : Alioth Exchange Green hall 7 Alioth Kosmos HQ Location ::pos{0,2,2.8943,105.4507,53.0078}

Here is the upgrade to the pocketJet, the pocketJet (rare). The three military engines are rare producing a top speed of 2500 with blistering acceleration and precision handling. This could be the fastest pocket ship in the game that looks like a ship. It also carries two passengers. Dispenser location: ::pos{0,2,53.8853,90.0610,40.1070}

Build by Ch3w8a (Shenluan#8552) The logical sequel to the BIG S, a model aimed at the highest possible performance. A little Borg gem. 12 L Containers Warp-drive All elements repairable easily Shield M

Zero Cool is unique experimental sci-fi style supersonic heat-resistant ship. @youtube = https://www.youtube.com/watch?v=Bs4aii8Hk6c It's very easy to control and can lift about 2000t of cargo (give or take based on talents). It will very easily go over 1500km/h in lower atmo with only 30% throttle. It's powered by 6x uncommon maneuver atmospheric L engines, but stock engines will work fine too, they'll just eat bit more fuel and warm-up time is longer. It has about 17g lift from wings, which should be able to get 2000t of cargo into space from any planet's surface. most important part about this ship, is that it's equipped with heat shield, which prevents you from taking damage when going supersonic speeds in atmosphere. you can easily fly 2000km/h in lower atmo and 5000km/h in upper atmo. it's not 100% as it depends how good you are at flying, for example if you start turning at high speeds, there's a risk that some elements may take heat damage or break completely, but if you know how to fly and don't make any sudden turns, then no problem! I have gone around alioth twice at about 5000km/h and haven't had any issues. This ship is designed for effeciency and ease of use, it will get you from A to B faster than normal ships. It only has 2xM containers + 4x S containers, but you can easily squeeze 4 more S containers on it. This ship is almost as small as S core, but reasons why it uses M core, is because smaller size M core ships are more heat resistant and also so that you can tow S core ships with it.

New Product by DarthShelL in association with Stellar Forge Rapid ongoing development DHP hybrid v.1 A little taste of what's to come ask in our creators page about options and upcoming features. VR: Stellar Forge

DM Deravi#6100 on Discord, currently based out of Haven 14. I made this version after launch to be as affordable as possible. It doesn't inspire in any one category but it drags a good weight across a planet's surface and can lug a little over 100 tons into space at an angle. It works in first and third person views and is made from brick and carbon fibre so it's quite light. It ALMOST fits on an XS core but those foils are a bit tall. Has 2 S containers, 3 XS. A TIE Fighter isn't the most efficient design for a primarily atmospheric ship (those scattered S space engines are just enough to brake gravity and not much else) but it looks great and is very safe and fun to fly.

The Bad Flyers Friend! a 10 pack small container ship that works epic tons of thrust and power for the small ship and operates super awesome XS core ship and plenty of fuel 43,028km/h with just the fuel in it for space so pretty fast too!. Available at ADMI build store vr name is same so if you need the cords for the sore. ::pos{0,2,-24.6842,16.8702,151.5735} on alioth

This is a FLYING GUILD HALL. For any fans of SWG, player housing stood out even to this day as an amazing system from the technical programming side to the completely unique way players utilized it- so much fun for bringing people together or even being the envy of the server for having the largest, shiniest, most visited, etc. That spirit is very much alive in DU and one of the reasons I felt inspired to bring back a taste of the 'feel-good' content from gaming over the years. This high-accuracy recreation has enhanced use you wish you had 20 years ago, namely, it FLIES now! Create your most fancy halls once again and bring them along where-ever your adventures take you! FEATURES: -Large open spaces perfect for countless uses, make a vendor mall, make a lounge bar, make anything! -5 Large Sub-level rooms: great for storage, bedrooms, trophy-sets, art galleries, etc -2 Side rooms with extra storage room/ staircases to top pad -Top landing pad fits full S-core ships -Full art gallery of hand-picked screenshots featured by Sony Online Entertainment. -2 Moisture Vaporators to help you stay moist! -Plenty of power and lift if you want to use for common casual hauling. (6 Large Atmo Engines, 4 Large Space) **VERSIONS- This isn't the true TATOOINE guild hall, this is just a tribute. During beta I made the Generic and Naboo versions, then a Sith, then this one. It was easier to just add the mounds on top for my take on this style using the traditional hall. Most fans will remember in SWG there were 4 models for Generic, Naboo, Corellia, and Tatooine but Tatooine had a uniquely different model from the rest. Perhaps I'll get around to making that one too, one day... *Reminder: as with all flying buildings by LSA, these models can be 'buried' or snuggly fit into other static builds and effectively used nearly the same. There are no current plans to copy guild halls to static cores.

As he clawed his way into the launch of Dual Universe, Resource was heard screaming, "NO SHOEBOXES". Surely a ship could be built that could satisfy the detailed mind of a this ship builder with performance we all want, NO EXPECT without looking like a shoebox. And so as he toiled away in the darkness of Thades shadow at the Crash Industries skunkworks, the Cambria took shape. A T shape to be exact. But how would Resource achieve the high altitude lift he wanted, no required AND avoid a wall of engines? These are the challenges that drive some mad as they rebreathe the same stale air inside their helmets. The space anguish spiraled out of control as the ship went from 2, no 4, no 4.5 containers! Just when some would break down in a pile of mangled voxels, Resource looked up and saw his masterpiece. His first thought? I wonder if I can cram a medium shield in there? ... the answer was yes. The Cambria by WarpForged is a small core (small footprint) hauler that safely lifts two XL mission packages (2.8+ kt in 4L & 1M containers) from Alioth's surface with level 4 pilot talents. This hauler is made for everyone who needs to get stuff done. It's a good looking ship without a bunch of extra elements you're going to have to repair if the inevitable happens. This ship is available as a blueprint and fulfilled as a token by the wonderful crew at Hadron ::pos{0,2,-21.5141,122.5144,170.2965} Special thank you to my friends at Crash Industries, Kosmos, and Outer Rim Explorations!