Dual Universe Creators

Ikara Industries presents the "Ikara Static Cores Factory". You want to build something, but you don't have the cores. The way to the market is too far for you! Then the "Ikara Static Cores Factory" is just what you need. With this Cell Tower factory you can produce the following cores per day depending on talents. XS up to 847 S up to 384 M up to 34 L up to 16 (tested with level 4 talents on all parts) The tower contains: - 9 L container for pure ore - 2 L containers for core output - Container script (ContainerMonitoring) provided by DU_ASTco - Schematics Monitor provided by GcGoat - S-Core - 1 to 4 per core production - Open and light flooding design - Exterior walls can be added with a little customization using the Ikara Panel Kit S01, sold separately What else you should know: - All signs can be activated with the manual button next to the elevator - To ensure efficient and uninterrupted core production, the factory should run 24 hours without main core schemes. VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries Any questions? - Message to @Ikara2184 on Discord

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Roads for the ADMI Deluxe Pads easy to place and easy to change colors for! Location is the same ::pos{0,2,-24.6313,16.7490,95.7777} as the pads and vr.

Features: 600kl of storage Colonist Description: You never imagine surviving a Neutron Star meant you would also start your new life on a new planet still working long grinding hours for some affluent jerk. No matter where you go there is the predator and the prey. At least the neighborhood is safe, and you don't have to worry about the type of accidents that happen on an asteroid. Owner Description: You paid the ticket for six other sods to accompany you to the new world, there was nothing in their contract that stated how they should be treated when you bought them, and we do mean the people not the tickets. Yes the bots do most of the work, but you still prefer a human that satisfies the eye for cleaning your mansion, you need an engineer to repair the bots, and well let's not forget the accident with the plants when you bought the droid from that shady dune dweller on Haven. (Tokens will not be made available)

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

New pads from The Gray Order (changed name from ADMI to Gray) Large core fully detailed with easy to use placement the footings are a basic voxel shape so if you need to make it taller is super easy! There are 2 dispensers one for regular 6mil and other is for discount option if you want 10 for 10mil off ( 50mil instead of 60mil) thanks for shopping cords for base are same VR "ADMI build store" position ::pos{0,2,-24.6313,16.8071,150.4663} name subject to change soon will alter here too.

•The first and only Warp Cell Factory provided on the most compact of cores! (XS) •Blank design, customise its facade to match your environment! •Easy display & management system! •Every Element accessable without space wasting walkways! •*Provides up to 173 Warp Cells per 24 hours! • Use either Pures or Ores! Or a combination of both! • Available as Static or Space version! [UPDATED 2024] The bottom (Catalyst overflow) can be used as the Schematics Container, requiring no additional construction edits. [UPDATED 2023] No overlap - Future update ready! Optimised to hold 3 days production in Ores AND Pures! (over 300kl storage!) "SWARM Flotilla Shop" Surrogate Pad available for preview of working display! * Based on Talent application. Talent application and setup provided upon request for an additional 8,000,000ħ Contents: Basic 3D Printer 2 Basic Chemical Industry 2 Basic Electronics Industry 3 Basic Glass Furnace 6 Basic Recycler 2 Basic Refiner 7 Basic Smelter 2 Canopy Windshield flat M 4 Canopy Windshield flat S 8 Container Hub 7 Container M 2 Container S 11 Container XS 14 Long Light M 2 Manual Switch 2 Programming Board 2 Static Core Unit XS 1 Transfer Unit 1 Transparent Screen M 1 Transparent Screen XS 2 Uncommon 3D Printer 2 Uncommon Checmical Industry 1 Uncommon Electronics Industry 12 Uncommon Glass Furnace 8 Uncommon Refiner 3 Uncommon Smelter 1 Vertical Light S 5 Glavanized Dark Gray Aluminium 402 Schematics Required: (Cost of 35,407,939ħ) Al-Fe Alloy 1 Calcium Reinforced Copper 1 Cu-Ag Alloy 1 Glass 1 Advanced Glass 1 Ag-Li Reinforced Glass 1 Polycarbonate Plastic 1 Polycalcite Plastic 1 Polysulfide Plastic 1 Basic Component 1 Basic Connector 1 Uncommon Connector 1 Basic LED 1 Uncommon LED 1 Basic Antimatter Capsule 1 Uncommon Antimatter Capsule 1 Advanced Antimatter Capsule 2 Basic Quantum Core 1 Uncommon Quantum Core 1 Advanced Quantum Core 2 Advanced Antimatter Core 6 Advanced Quantum Alignment Unit 6 Warp Cell 5 Pure Hydrogen 1 Pure Oxygen 1 Pure Aluminium 1 Pure Carbon 1 Pure Iron 1 Pure Silicon 1 Pure Calcium 1 Pure Copper 1 Pure Sodium 1 Pure Lithium 1 Pure Silver 1 Pure Sulfur 1

We Create Voxels presents "Diglett" - a voxelised rendition inspired from the original Pokemon series. Available in both Static and Dynamic blueprints, Diglett is a hollow hull and makes the perfect mining outpost for Pokemon fans. Available for purchase at: ::pos{0,2,36.9091,101.8558,144.5942}

A Fuel and Cell Station Module on M core Small landing pad on top for S core size ship Control tower with 360° view! 4 corridors to connect other modules / space elevator No machine on the blueprint Lower area has several spots for various industry machines, ie: - rounded area can hold up to 20 containers L - 36 refiners / smelters in angled corners - 16 chemicals / glass furnaces in center can be seen on VR: Aerogics Space Station

This M core build is the perfect starter base. Plenty of room for factories, XS ship storage or a cosy house. Simple yet effective detailing. Orange steel highlighting looks great in any colour. Version 2 has been replaced with easier to craft materials. Contact: Actimist#4020 Primary designer: culphy Contributors: Actimist Factory worker: Location: Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941} Search "NovaX Estates [Ships & Builds]" in the VR terminal to find us in-game.

Greetings! I will build you a customized factory based off of the layout I use for my own personal factory. My factories are always easy to understand and to expand upon. You're welcome to check it out in VR at "PvP Shop". Pictures are from another build I am currently selling. Reach out to me on discord for more information. TMA#0001

Derrick (Nodding Donkey, Pump Jack) Mining Unit. Holds 4 Mining unit L. 1x L container with Hub. Screens and board for Lua. Space underneath for Ore Collection. Comes with 4 Basic MUs, 1 L Container, 1 Hub, 2 Screens, Prog Board, Vr Pod, lights etc.. Most Voxels in Iron. All Basic Stuff

PYRAMID WARP CELL FACTORY: BETTER THAN THE REST CHEAPER THAN THE REST MAKES APPROX. 244 WARP CELLS PER DAY! 288 WITH LVL 4 TALENTS! LVL 4 PUT DOWN SERVICE 5MIL DOES NOT COME WITH SCHEMATICS. LIST OF SCHEMATICS NECESSARY CAN BE FOUND ON OUR DISCORD. UNLIKE THE OTHER MODELS FOR SALE ON DU THIS FACTORY COMES WITH EVERYTHING LABELED FOR EASY SCHEMATIC PLACEMENT. SCREEN LUA, SAME BASIC DIMENSIONS AS OUR OTHER FACTORIES SO THEY WILL ALL LINE UP NICELY. LIKE ALL OUR FACTORIES; EVERYTHING IS CONTAINER HUBBED FOR EASY EXPANSION, COMES WITH DISCORD AND IN GAME SUPPORT DISCORD: THE PYRAMID CO, https://discord.gg/MsMDcbgWBB CHECK OUT OUR SPACE CORE VERSION! MAKES THE SAME AMOUNT AS OUR STATIC VERSION!

--- 24 Hour Production with no boosting talents--- Basic mining Unit L - 24.5 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom