Dual Universe Creators

Newest Build from Dead Reckoning Shipworks. The Phoenix. Med core light hauler. Has been tested to haul 1.5 kt off Alioth Come see it in VR at Dead Reckoning Ship sales.

cargo lift capacity - to order Large Core This is an L core space elevator.

Inter City One by Titan Aerospace is a fun pocket speeder, driven by 3 medium atmo engines for maximum thrust and compactible with a full fuel tank. Even on basic engines top speed is over 1,200 km/h, depending on talents. Built for speed and agility its great to fly and means you'll never be stranded. The engines can be upgraded for even higher speeds.

Suborbital Superspeeder Single-Seater - - - 5,000+ km/h at edge of atmosphere --------------------------------------------------- For reference, please also see "Anisoptera v1" and "Anisoptera v2" on this website (the previous versions). The Anisoptera v3 X1 (internal code name: "Fast and Furious") is the latest version of this famous dragonfly-alike designer speedboat. The original designs called for a fast boat that could fit many different types of ship hangars, thus the resulting concept was that of a very slender ship hull. That in return resulted in a low drag amount and therefore high possible speeds if powered adequatly. Overheating starts at 1,800 km/h, first damage at around 2,300 km/h. At the edge of the atmosphere, in suborbit, no damage and overheating, and speeds in excess of 5,000 km/h. The version 3 has the following improvements over V2: - even higher speed (same atmospheric 2,300 km/h as before but now beyond 5,000 km/h suborbit) - slightly increased wing lift capacity - more brake power And the best is: from the outside there is almost no difference! NOTICE All versions avalable: - NEW! Anisoptera v3 (suborbital superspeeder one-seater) - NEW! Anisoptera v3 (suborbital superspeeder two-seater) - Anisoptera v2 (atmospheric speeder one-seater, THIS version) - Anisoptera v1 (atmospheric speeder one-seater, Poor Man's edition) AVAILABLLE NOW FOR A LIMITED TIME ON "Tropico" (VR), ALIOTH

After designing the other guild halls I wanted to try one in a more sinister style. Celebrating the darker, and richer side this blueprint uses upgraded engines, drastically increased lift and cargo capacity (for use as an everyday mission runner) and more elegant texturing in its striking appearance. Blueprint contains all furniture and screens for art gallery shown here. *Like the other guild halls, this is a FLYING BUILDING. FEATURES: -Large open spaces perfect for countless uses, make a vendor mall, make a lounge bar, make anything! -5 Large Sub-level rooms: great for storage, bedrooms, trophy-sets, art galleries, etc -2 Side rooms with extra storage room/ staircases to top pad -Top landing pad fits full S-core ships -Full art gallery of hand-picked screenshots featured by Sony Online Entertainment. -Plenty of power and lift if you want to use for common casual hauling. (8 Large Atmo Engines, 4 Large Space)

Divinity is a high performance 2 Container L ship designed for quick and easy errand runner. It features 4 Advanced Military Atmosphere Engines and 2 Maneuver Space Engines. The inside is open for personalization. Come visit us at ::pos{0,0,-313343.0662,978877.0950,-453292.8373} OR Visit us in VR. Search for "SF1 Showroom". I will place the ship for you if you bring me the parts and the blueprint. I have level 4 placement skills in everything and 5 in a few. I will be at full 5's in February. Feel free to stop back by for handling increases!

I am pleased with this ship design, which I called Elemental because I designed it to carry ore (elements) back when underground mining was done on planets. I have kept updating it as game updates so it is fully functional to date though the Adjustors need a little tweaking still since there is a small error in placement after one of the updates to item mass. Considering my 'Voxelmancy' is not as good as it could be I am really happy with how this ship looks. The ship is a small Core 1G hauler designed to carry just over 1KT of cargo (about 2.73 KT of weight including its own weight). I have stress tested the landings with about 1.22 KT of cargo but the landings gets a little bit more like a fall towards the atmosphere / space boundary at around this weight. If a lighter materials was used to build the ship then this could probably increase this carry weight a little (the ship is made of solid silver). The ship also has a Rocket engines to give the ship a bit of a kick into space if you slightly overload the cargo capacity or if you choose an angle that is too step to reach space with normal engines. They do have to be used close to the space / atmosphere boundary since the ship has 1 medium Rocket Fuel tank. The ship also features four downward facing atmospheric engines to provide more lift during landing when the ship is excessively overloaded in a 1G environment and coming in for a landing at slow speeds. LUA is required to allow them to be turned off and on to avoid wasting fuel all the time, though I have given these engines their own fuel tanks to avoid stealing fuel from the normal engines. I have engines facing in all directions for space flight with the majority pointing down wards and backwards, the remaining engines really being intended for manoeuvring. The Atmospheric engines point in every direction except pointing downwards since you have gravity to help you out with that direction. The values of Space and atmospheric thrust for this ship are the forward thrust values and not the total thrust values for all directions. I use a small amount of LUA on this ship since making my own interface is on my list of things to do in Dual Universe, currently I only use it for engine controls, to set the desired altitude and extend / retract the landing gear. Max Atmospheric speed is just 20,000 KM/H in space and 1000 KM/H in atmosphere before you start burning up. Lastly it is of made of solid glossy Silver, because when they released element resistances. Silver was the best basic material with resistance to weight ratio, without having to consider making an alloy. To be honest I actually quite like how it looks so I have been built all my ships out of this material.

DHP - Darth's Handy Platform This is the hybrid version. Can easily and fast bring you to your space station and also allow you to sniff around the orbit ------------ current software version - 2.0.5 ------------ = Manual = *Modes This version of DHP software has two modes which you can switch by pressing manual button at the bottom of the screen. Those modes are *Manual mode* and *Elevator mode* **Moving [Manual mode] Horisontal movement is only allowed in manual mode! [WASD] for moving in corresponding directions and even strafe with ALT + A and ALT + D by default Also you can double tap [W] if you want to hold your forward acceleration **ECU ECU allows you to release remote control while keep flight. Remember that you can easilly release ECU control or any control you want by pressing [ctrl + backspace]. **Elevator mode In this mode you can see a keyboard and the whole interface are pretty easy to understand. Keep in mind that DHP won't let you crash it with landing. It will stop right at the surface so don't worry and be free to set altitude to 0 or lower if you don't know exact surface altitude. **Important You have to set the correct values to all parameters which you can find in advanced options of your remote controller and ECU: [RMB->Advanced->Edit Lua parameters] If you see wrong numbers on the fuel bar then it's because you did not set correct values to those params. ------------ ::pos{0,2,34.2994,114.1250,183.7602} or VR to "LYB showroom" Don't buy anything in VR!

Looks like a plane Has 1 L basic atmo engine 4 medium space engines. room on the interior to add more storage Contact me on Discord for Token sales

Spaceship, Speeder and Double-Seater - - - --------------------------------------------------- For reference, please also see "Anisoptera v1" to "Anisoptera v3" on this website (the previous versions). The Anisoptera v4 X2 (internal code name: "Gliese") is the latest version of this famous dragonfly-alike designer speedboat and completes the evolution towards a fully space-capable speedboat. The original designs called for a fast boat that could fit many different types of ship hangars, thus the resulting concept was that of a very slender ship hull. That in return resulted in a low drag amount and therefore high possible speeds if powered adequatly. Overheating starts at 1,800 km/h, first damage at around 2,300 km/h inside atmosphere. The version 4 has the following improvements over V3: - even higher speed (same atmospheric 2,300 km/h as before but now towards 30,000 km/h in space) - more brake power And the best is: from the outside there is almost no difference! NOTICE All versions avalable: - NEW! Anisoptera v3 (space-capable superspeeder one-seater) - NEW! Anisoptera v3 (space-capable superspeeder two-seater) - Anisoptera v3 (suborbital superspeeder one-seater) - Anisoptera v3 (suborbital superspeeder two-seater) - Anisoptera v2 (atmospheric speeder one-seater, THIS version) - Anisoptera v1 (atmospheric speeder one-seater, Poor Man's edition) AVAILABLLE NOW FOR A LIMITED TIME ON "Tropico" (VR), ALIOTH

From the Prometheus Class fleet, here is our Flagship! The "Torch of Prometheus" is leading into Darkness of Space. Through space and time there will be only place for the brave and the bold. Expanding horizons and discovering new worlds with this Ship. It comes with an AGG, Warpdrive Adv. Military Engines and Crew Rooms. Stats are boosted between skill lvl´s from 4 - 5 so there is a little more to get out of it. If you buy a copy a boosting Service is included. Most skills are lvl 5. Use the VR Port and look for "16t".