Dual Universe Creators

Ikara Industries presents the "Ikara Warp Cell Tower S01 V2". Optimized Version of the "Ikara Warp Cell Tower S01 " You want to visit distant planets, but flying takes too long? Then the "Ikara Warp Cell Tower S01 V2" is just the thing for you. With this Warp Cell Tower you can produce up to 528 Warp Cells per day depending on your talents. (testet with level 4 talents on all parts) The Tower includes: - 9 L container for pure ore - 1 L container for the warp cells - Container script (ContainerMonitoring) provided by DU_ASTco - Schematics monitor provided by GcGoat - S core - 2 to 8 units each for the production of the Warp Cell intermediate parts - 16 Uncommon glass furnaces for manufacturing the warp cells. - The outer walls can be replaced with the separately available Ikara Panel Kit S01. What else you should know: - All signs can activate with the manual button underneath the main screens - For efficient and uninterrupted warp cell production, the factory should run for 24 hours without warp cell schematics. VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries or Ikara Industries Exchange (in the Yellow Hall of Alioth Exchange) Any questions? - Message to @Ikara2184#2629 on Discord.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Vortex Geometry has developed a mining platform. The platform is called "DREDGER" and is very easy to operate and has an awesome futuristic look and feel. The container is located at the top of the structure, a hub container is connected to it, for convenient access to the ore at the level of the character's height. By the same principle, the mining units themselves. The platform is designed for 4 L Mining Units ____________________________________________________________________________________________________ NOTICE!!! * Blueprints what we are sold it is non core blueprints. ** When ordering more than one BP, you get a discount 15%(BP). If you have any questions, or want make order - please contact me on the discord.

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

M Core Landing pad

Put your favorite cantina song on repeat as you plan your next builds and adventures. All are welcome, but your droids will have to wait outside! During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and even the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. Static Model of the Cantina is on display at LSA Industries HQ, 13Km SE of Alioth Exchange (VR Location 'LSA Industries Alioth') *What is on display is what is on the blueprint, all furnishings, screens, lights, chairs, etc

This is the first construct I designed in beta. (Almost) free blueprint with No DRM. That means you can deploy one copy, then create your own core blueprint to make as many more as you require. Classic "Brutalist" style in concrete, iron and glass. Space for up to 8 miners. Surrogate pod for VR calibrating. Luminescent glass! Chimneys! Dispenser at Hadron HQ Alioth ( ::pos{0,2,-21.7618,122.5465,114.3602} ) When placing, the opening at the base faces away and to your right, 45 degrees from straight ahead. Rotate so that corner faces you and the opening will be facing you. The concrete foundation is 7 voxels high and can be set down to accommodate most terrain on Alioth with minimal or no flattening.

PYRAMID SHIP PARTS FACTORY: A SHIP BUILDER'S DREAM! MAKES EVERY SHIP ELEMENT EXCEPT ENGINES ENGINE FACTORY COMING SOON ALSO MAKES PROGRAMMING BOARDS AND DATA BANKS HAS EXTRA ASSEMBLY LINES TO ADD YOUR OWN EXTRA PARTS THIS FACTORY IS A BEAST! DONT MISS OUT! OUR SCREEN FACTORY IS A GREAT COMPLIMENT TO THIS FACTORY LIKE ALL OUR FACTORIES; COMES WITH: INGAME AND DISCORD SUPPORT. ALL MACHINES ARE LABELED TO MAKE SCHEMATIC PLACEMENT A BREEZE. ALL CONTAINERS ARE HUBBED TO MAKE ADDING STORAGE CAPACITY A BREEZE TOO! ENJOY! CHECK OUT OUR BIO FOR MORE PYRAMID CO INFO

Last few months I have been working on this Market Replica. It worked out pretty well. Just check it out in VR. (Market Replica East and Market Replica West) Note: No market machines included. ;-) Place your dispensers there or do what you like. Beneath the base there is a ton of space to make a factory or anything you like. Currently available @ Drack shipshow. Later available @ Kosmos showroom.

A simple Mine site with a Large container and 4 MU, a screen and a keyboard. Token is a full package that you can deploy where you want. Version exist without Script.

50% off blueprint price at the moment on dispenser A stylish workshop for building XS,S,M core's, plenty of room for deploying your voxel library cores with storage on platform and plenty of freedom to customise your workshop inside like copy and past all your voxel librarys to the inner walls and corners of the workshop for easy access for when your building, placement rules are 1 click down and the enterances are facing you when u deploy the BP you can check it out in VR search for loaded industries showroom for anyone that purchased before 7th may please let me know and i come and release the drm on your building

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

50% off blueprint price at the moment on dispenser This is the standalone outpost style pad, built on a large core placement rules are just 3 clicks down when your blueprint is flush with the core your stood on once you have it lined up, if your flush on soil/ground just do 2 clicks down you can view at the location written on the right of the screen or view in VR search for loaded industries showroom and your find the structure at the end of the runway, dispenser is located on the structure any question please message me on discord

my little entry for the NQ Build Your Legacy contest, only started last week so not to long on the build but im happy how it turned out which is pretty hard putting detail together with the rules of no more than 700 meters of honeycomb, comes with lobby, office, living room, bedroom, bathroom and storage area for ship parts, ive always built large core buildings but ive enjoyed playing around constructing a building this size with compact rooms that have a true feeling of space for the size of our avatars, i will look forward to doing more on release :)

PYRAMID FUEL FACTORY: MAKES FUEL, AND A LOT OF IT MAKES; NITRON 600KL PER DAY KIRGON X1-X4 300KL PER DAY OF ONE OR APPROX 75KL OF EACH EASY TO SET UP, EASY TO EXPAND STORAGE WE NOW HAVE A MODEL THAT MAKES XERON TOO 100KL PER DAY same price READ OUR BIO FOR MORE INFO