Dual Universe Creators

Production Per 24 hours with no industry talents Basic Assembly Line XS- x720 Basic Assembly Line S- x180 Basic Assembly Line M- x45 Basic Assembly Line L- x11.25 Basic Assembly Line XL- x6 Basic 3D Printer M- x45 Basic Chemical Industry M- x45 Basic Electronics Industry M- x45 Basic Glass Furnace M- x45 Basic Honeycomb Refinery M- x45 Basic Metalwork Industry M- x45 Basic Recycler M- x45 Basic Refiner M- x45 Basic Smelter M- x45 Transfer Unit- x11.25 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

50% off blueprint price at the moment on dispenser This is a complete kit of my landing pad without basement, you can make any size landing pad you like even connect 4 cores together for extra large one or even larger, ive tried to make the instructions as simple as i can but hopefully if your interested in this kit you already know how to copy and paste and rotate etc please check out the pictures for more info and if you need any questions answered dm me on discord loaded#2378, location on your right in the info and the dispensor is in front on the landing pad, i also added a base part with no wiring details also u will want plenty of medium glass panel to go over the wiring detail, can also change the colour to your what ever you like. PS no need to press shift when adding the leg stands

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

Decorative Element drm free VR "Alioth Marina"

PYRAMID FUEL FACTORY: MAKES FUEL, AND A LOT OF IT MAKES; NITRON 600KL PER DAY KIRGON X1-X4 300KL PER DAY OF ONE OR APPROX 75KL OF EACH EASY TO SET UP, EASY TO EXPAND STORAGE WE NOW HAVE A MODEL THAT MAKES XERON TOO 100KL PER DAY same price READ OUR BIO FOR MORE INFO

XS Core Bunker. At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} More Comming Soon!

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 my latest static building is a large factory you can visit in vr seacrh for loaded industries showroom and exit that building and your find this factory across runway, this large core factory pretty much takes up the full height of a large static core and comes with 5 floors, you can copy and paste more racks and place as you need them or you can even delete all racks and turn in to a showroom or anything you like, there are 2 different blueprints one with and one without a expanded small gate so you can build without spending millions on a door that you can add later if you wished, any questions please message me on discord, location to your right for dispensers and please dont buy in VR

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Warp Cell Cube Design inspired by the famous Mario Bros Warp Cube, this XS Core is packed to the bone with industrial machines and design to have a production capacity of 520 warp cells per day, needing only to feed with the 10 ores required for warp cell production, Pure Hydrogen and the 6 schematics needed for warp cell production. Features: - Capacity: 520 warp cells per day with moderate T1/T2 production talents - Feeds from Ores and Hydrogen, so no need for additional machines (refiners e.g.) - Easy setup: when powered on, all machines will be calibrated to produce the right amount of intermediate products to feed into the 16 Glass furnaces for Warp Cell production - Easy maintenance: elaborate monitoring screen, showing the status of each (sub)assembly being produced as well as the inventory levels of the Ores, blueprints and Hydrogen. - Token available on request, please do expect some time needed for the production of the machines - Support during setup on request (although should work straight from the box) No more need for giant setups for warp cell manufacturing! This XS core is probably all you need for your personal warp cell needs! Location for watching the cube in action: ::pos{0,2,7.7358,80.4968,220.3335} visitable in VR though: Warp Cell Cube Demo

** UPDATED PRICE AND VR LOCATION ** Tired of boring mining platforms? This industrial mining outpost raises your mining operations to the next level! Outpost has been designed to house max 5 mining units. It has 1 large container for ores, 1 small container for fuel and 1 refiner to refine ores to M size container if needed. There are 3 different landing platforms for your haulers or personal aircrafts for easy access. You can access fuel, ore and refined ore directly from landing platforms. Naturally you can use elevator access from the ground if you arrive with very large vessel. I will also sell VTOL ships which I use with these platforms. Let me know if you are interested of these also. Volume discount is possible. Please pay attention on details, there are plenty. You can now check out this building via vr: "Odz Mining Outpost MO31" Sale for pb and other Odz stuff can be found from: Location: ::pos{0,2,-0.8187,178.5356,52.3225} Surrogate: Odz ShowRoom (dont buy stuff if surrogate, you have to come visit) Message Odzord#2815 for questions.

M core with landing area on top Identical to the other M landing pad module but without interiors (uses less honeycombs) 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Purple Plastic: replace with color of your choice when customizing 3.5k alu 700 plastic 200 iron 100 carbon fiber / steel

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.