Dual Universe Creators

It is said that skilled pilots can make the Dune Hauler fly, while newer ones will want to stick closer to the ground. For the Dune Dwellers of Haven this common hauler is a staple in their fleet, and is a common sight on the flatter surfaces of the planet. (Tokens will not be made available) Featured by: - Landmark Explorer Twitch Channel

Fully Loaded Alioth - Jago: 10 WCs only! - - - WARP TUBE A stylish, well-designed warp shuttle that holds two XS containers. Everything has been optimized and reduced to minimum to save on weight and thus on warp cell consumption. The hovers function also as low-consumption propulsion that can be used for low distances, and provide above 160 km/h without usage of any regular engine. The Warp Tube also features two diagonal rocket engines (800 L) that help to avert any crashes due to inexperience by giving lift and forward speed at the sme time, and also help lifting off from space platforms. Strong lights illuminate dark areas where you try to land. Last but surely not least, the boat is packed with brakes to such extend, that - to give an example - landing from orbit on Jago's surface does not require any engine thrust! With other words, as part of the weight reduction the fuel consumption has been minimized, too. That leaves more space for cargo. OVERLOAD HINT: The Warp Tube can get into space from Alioth with both XS containers full and the pilot's inventory full too, if you fly an outgoing spiral. :-) See all ships using VR, at "Tropico". Contact at Discord: "Hirnsausen#3973"

DM Deravi#6100 on Discord, currently based out of Haven 14. I made this version after launch to be as affordable as possible. It doesn't inspire in any one category but it drags a good weight across a planet's surface and can lug a little over 100 tons into space at an angle. It works in first and third person views and is made from brick and carbon fibre so it's quite light. It ALMOST fits on an XS core but those foils are a bit tall. Has 2 S containers, 3 XS. A TIE Fighter isn't the most efficient design for a primarily atmospheric ship (those scattered S space engines are just enough to brake gravity and not much else) but it looks great and is very safe and fun to fly.

Includes spacious board room with mood lighting that warmly highlights the rich wood grain of the table and exposed hardwood beams, automatic fireplace, animated fish tank, seating for 10 in the board room and 7 on the open air roof deck where the built in grill is located.

Highly maneuverable runabout designed for traversing large space stations quickly and efficiently. Starlantis and Utopia II for example. Mult-axis space engines and plenty of adjustors make this easy to fly and navigate in 360 degree space. Dispensers can be found on the Starlantis space station here. ::pos{0,0,-1000011.0777,593180.0550,-1418890.2448}

Now on version 3 that includes all the VPT work that wasn't around when I first made it. The Spindler was my second ship that I made and my first to see space. Many moons later I've completely redesigned it with better, prettier voxel work, upgraded engines and really better stats all the way around. While my first space faring ship worked, this one will help you make that transition to space so much easier and with much better style than I had. ArchHUD Check it out at my base or in VR at "Czar on Haven"

A very fast podracer I built during beta and have revised slightly since the reset. This is an atmosphere-only ship though you may wish to add a space brake for those pesky accidental takeoffs. This should be considered a novelty ship that is not intended to haul. There is no storage built into the ship itself. With appropriate talents, and basic tier flight elements, you can easily reach 1500 kmh in atmosphere. Without talents, you can still likely reach 1500 kmh, but the ship will likely start to burn up.

The Hyaku Choxie was featured in the official launch trailer! With considerable screen time, to boot- 10/2023: The Hyaku Choxie is available again on Haven! See my new workshop through VR at "Choxie's workshop" Visit the store on Haven, ( ::pos{0,27,-80.8401,89.2208,241.0850} ) BSW's first commercially successful model, the Hyaku Choxie is a multi-role S-core ship inspired by Quatro Bejeena's MSN-00100 Hyaku Shiki mobile suit from Yoshiyuki Tomino's 1985 masterpiece "Mobile Suit Zeta Gundam". The original Hyaku Choxie was composed of gold voxel. The III-B type is made of cheaper materials such as polished yellow steel and aluminum, effectively saving on weight and cost without a sacrifice to looks! Features: -Fully detailed luxurious interior with passenger seats and navigator seat. -Quality-of-life LUA scripts including Navigator HUD, Damage Report, Warp Map and Inventory control. -An array of lights, all on toggle switches, set to imitate real-life aircraft; landing lights, indicator lights at the wing tips and tail, headlights, cabin lights etc -1 L-size container (can provide lvl 5 container handling talents), tested with 179kL of hematite (over 750t) -Overtuned with excessive atmospheric and space thrust, as well as lift. Meticulously balanced adjustors and elements by our in-house engineer guarantees a smooth flying experience. -Warp Drive This ship's design philosophy was to cover as many bases as possible, to be an everyday ride and a cost-effective warp-capable shuttle. Able to carry passengers, a moderate amount of cargo, and light enough to be cheap on warp cells, this ship is ideal for solo freelancers or small operations looking for a general purpose machine. Check them both out at VR station: "Choxie's Workshop" Feel free to contact me on Discord, I am in the official DU and DU-creators channels. If you interested in purchasing blueprints, here is a fast way to get to my base (If you're on Alioth): -Go to any of the Alioth districts with teleporters, and teleport to district 9. -Take the shuttle to Haven from District 9. This will put you at Haven Market 9. -My base is about 35km south of Haven District 9.

As he clawed his way into the launch of Dual Universe, Resource was heard screaming, "NO SHOEBOXES". Surely a ship could be built that could satisfy the detailed mind of a this ship builder with performance we all want, NO EXPECT without looking like a shoebox. And so as he toiled away in the darkness of Thades shadow at the Crash Industries skunkworks, the Cambria took shape. A T shape to be exact. But how would Resource achieve the high altitude lift he wanted, no required AND avoid a wall of engines? These are the challenges that drive some mad as they rebreathe the same stale air inside their helmets. The space anguish spiraled out of control as the ship went from 2, no 4, no 4.5 containers! Just when some would break down in a pile of mangled voxels, Resource looked up and saw his masterpiece. His first thought? I wonder if I can cram a medium shield in there? ... the answer was yes. The Cambria by WarpForged is a small core (small footprint) hauler that safely lifts two XL mission packages (2.8+ kt in 4L & 1M containers) from Alioth's surface with level 4 pilot talents. This hauler is made for everyone who needs to get stuff done. It's a good looking ship without a bunch of extra elements you're going to have to repair if the inevitable happens. This ship is available as a blueprint and fulfilled as a token by the wonderful crew at Hadron ::pos{0,2,-21.5141,122.5144,170.2965} Special thank you to my friends at Crash Industries, Kosmos, and Outer Rim Explorations!

If you loved the games, I think you'll love this dragster sled. 2400km/h at sea level. Moltres Shield™. Embrace the flame! Contact seller for details and setup instructions for the Moltres™.

New Product by DarthShelL in association with Stellar Forge Rapid ongoing development DHP hybrid v.1 A little taste of what's to come ask in our creators page about options and upcoming features. VR: Stellar Forge