Dual Universe Creators

We Create Voxels presents "Diglett" - a voxelised rendition inspired from the original Pokemon series. Available in both Static and Dynamic blueprints, Diglett is a hollow hull and makes the perfect mining outpost for Pokemon fans. Available for purchase at: ::pos{0,2,36.9091,101.8558,144.5942}

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

We proudly present our first static entry under Prometheus first fire. Made by Vorkan and DotHack, this space station is built on a L space core and has all the accommodations you need to live into space and do all your activities. It also has a lot of space under the large landing pad to suit your factory needs and expand as you like. You want to relax after some asteroid expedition or any PvE/PvP adventures? Go take a breather in your personal sky bar that will surely give you the best view. Comes with: 1 L landing platform 4 S landing platforms 1 fuel factory 1 maintenance unit 1 DSAT 8 Expanded XXL containers as main cargo (plenty of place to put more) 4 L containers for the fuel factory all the factory elements needed for the functioning of the fuel factory All elements included in the BP. BPs available to buy in several locations: ADMI build store VR: ADMI build store (go to the Prometheus first fire floor at the top of the structure) Coordinates - ::pos{0,2,-24.6842,16.8702,151.5735} Paragon Hex showroom VR: Paragon Hex Showroom Coordinates - ::pos{0,2,35.3441,107.0564,-13.1840} Vega Industries (coming soon) VR: Vega Showroom Coordinates - ::pos{0,2,-22.4597,13.9911,-0.0001} For any questions, contact vork on discord

Decorative Element 20 Voxel Diameter drm free VR "Alioth Marina"

Designed by AtmoCorp, a subsidiary of Infinity Corporation. The AtmoCorp T2 Outpost is the next step up from your Starter outpost. Designed to be deployed on any terrain, the T2 Outpost comes with a personal landing pad, two floors of living space, and an outdoor terrace and jacuzzi. With a Container Hub and up to ten large containers pre-installed, with T5 talents included it has a storage capacity of 1920kl. *NEW updated version includes four Basic Mining Units and a rack to hold them. If you don't plan on mining, it can be deleted. The Outpost is built on the top half of a Medium Core. It can be placed with the lower door at ground level, with half the core below the ground to allow for an underground factory. Or the core can be raised up as high as you want, and the lower door and support structure can be copy and pasted to extend it to the ground. Blueprint for sale for 5M 7km south of Market 7 ::pos{0,2,19.3915,97.2582,147.7494} Or in VR search for "AtmoCorp Alioth" DM [IC]Atmosph3rik#6658 on DISCORD with any questions.

L core Modular Space station with a Atlas L core Elevator docking cradle (it can dock other elevators with small modification) , you can easily expand the station with additional modules like the SKY Aegis SPC Dual PAD Visit at VR: SKY Aegis SPC Core Atlas Blueprints available at Alioth: ::pos{0,2,54.7335,109.8047,69.0288}

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The X6 marks the smallest X series made by Locura. Like all other X Series units, the X6 brings all the features you could expect from a Locura X Series rig. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Make a feature of your unsightly DSAT and turn it into an observatory. Voxel shapes only... pls decorate it in your own style... dm me if you want the image and i'll link it. Available to view on my Alioth Base to the left of the hangar behind my Yacht's dock. DRM FREE.... so you can copy and paste it onto an existing core. BP's available in the lil BP shop on my Alioth base HERE ::pos{0,2,2.4733,104.9278,1.5932} You can view all of my creations in vr....Orri Alioth Base... and you will arrive in the airport arrivals hall thanks for looking :-)

We are thrilled to announce the launch of the Double L Core Hangar. This hangar is designed to provide you with the ultimate storage solution for your ships. With its Double L Core design, it offers ample space for your ships while keeping them safe and secure. The Double L Core Hangar is built to last, with a sturdy construction that can withstand even the toughest of conditions. It is equipped with the latest technology to ensure that your ships are always in top condition, with advanced climate control systems that regulate temperature and humidity levels. Whether you’re a seasoned pilot or just starting out, the Double L Core Hangar is the perfect choice for all your storage needs. So why wait? Get your hands on the Double L Core Hangar today and take your flying experience to the next level! 2 Blueprints included VR: SKY Blueprint Store ::pos{0,2,54.1655,109.9058,46.1828}

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

Features: 600kl of storage Colonist Description: You never imagine surviving a Neutron Star meant you would also start your new life on a new planet still working long grinding hours for some affluent jerk. No matter where you go there is the predator and the prey. At least the neighborhood is safe, and you don't have to worry about the type of accidents that happen on an asteroid. Owner Description: You paid the ticket for six other sods to accompany you to the new world, there was nothing in their contract that stated how they should be treated when you bought them, and we do mean the people not the tickets. Yes the bots do most of the work, but you still prefer a human that satisfies the eye for cleaning your mansion, you need an engineer to repair the bots, and well let's not forget the accident with the plants when you bought the droid from that shady dune dweller on Haven. (Tokens will not be made available)

Greetings! I present to you a warp cell factory that produces 540 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 20m Quanta 2 - Blueprint + Buffs/Help setting up, 45m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 75m Quanta

At daytime a fairly normal looking tower, but at night it seems to be burning. 5,000,000 quanta for a batch of 8 blueprint copies. Dispenser is in the penthouse underneath the landing pad in the top of the tower. Deploying strategy: 1. deploy the base core 2. deploy the North core, then the East, then the South and then the West core 3. deploy the first floor on the base core 4. deploy the second floor on the first floor 5. the second floor bp copy is DRM free so you can mulitply it to make your Lotus tower higher 6. deploy the top floor on the final second floor core NOTE! Possible problems: while connecting the North, East, South and West cores to the base core you may have to remove glass panels from the base (4 in the center) and then place them back when the core is placed. Check out the tower in VR: The Burning Lotus or visit at location: ::pos{0,2,40.7757,116.8397,0.0000} Have fun!