Dual Universe Creators

50% off blueprint price at the moment on dispenser loaded industries presents large core space landing pad, this is the same as my ground version with basement thanks to daddyshark for doing the conversion for me, you can easily add these to any other building you have in space just square up the blueprint and do 2 clicks down when level on the core your stood on or just place in space any where you like, dispensor can be found at my base

PYRAMID AMMO FACTORY RGEAMS This factory makes a ton of ammo! makes 4 types of rail gun ammo: M and S and L* electromagnetic and antimatter produces approximately 2500 S and 1500 M per day depending on your talents. we also make custom ammo factories. 5 mil down 5 mil on completion Since launch *THIS FACTORY MAKES ALL THE NECESSARY PARTS FOR L AMMO TOO. JUST PLOP AN L ASSEMBLY LINE DOWN AND LINK FROM THE APPROPRIATE CONTAINERS. I CAN HELP WITH THIS UPGRADE IF YOU CONTACT ME. READ OUR BIO FOR MORE INFO

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

In the process of moving, blueprints are available to Kosmos Exchange. Space!!!! It's got electrolytes. It's time to upgrade from that voxel thick landing pad with containers strewn about? You'd like some style? You like furniture from Ikea? Look no further, I've got you covered with the new modular series of stations offering you usability and looks in one package. This station features ample landing and hangars for XS-M size ships. A big pass-through hangar for building or parking up to M core ships, 3 XS core hangars and 3 wide XS-S hangars. In addition, there is a ton of storage space, about 2 M cores worth of factory space, and plenty of space for you to customize living spaces. With the new blueprint snap, adding additional modules (coming soon) will be a breeze and seamless to help make your space experience more immersive. All future modules will have connection points with transition stairs or walkways to make moving between cores easy. Moving to space starts here See it in VR at "Czar in Space Showroom" Dispensers are there too

Greetings! I present to you a warp cell factory that produces 240 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 15m Quanta 2 - Blueprint + Buffs/Help setting up, 30m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 50m Quanta

Greetings! I will build you a customized factory based off of the layout I use for my own personal factory. My factories are always easy to understand and to expand upon. You're welcome to check it out in VR at "PvP Shop". Pictures are from another build I am currently selling. Reach out to me on discord for more information. TMA#0001

Warp Cell Cube Design inspired by the famous Mario Bros Warp Cube, this XS Core is packed to the bone with industrial machines and design to have a production capacity of 520 warp cells per day, needing only to feed with the 10 ores required for warp cell production, Pure Hydrogen and the 6 schematics needed for warp cell production. Features: - Capacity: 520 warp cells per day with moderate T1/T2 production talents - Feeds from Ores and Hydrogen, so no need for additional machines (refiners e.g.) - Easy setup: when powered on, all machines will be calibrated to produce the right amount of intermediate products to feed into the 16 Glass furnaces for Warp Cell production - Easy maintenance: elaborate monitoring screen, showing the status of each (sub)assembly being produced as well as the inventory levels of the Ores, blueprints and Hydrogen. - Token available on request, please do expect some time needed for the production of the machines - Support during setup on request (although should work straight from the box) No more need for giant setups for warp cell manufacturing! This XS core is probably all you need for your personal warp cell needs! Location for watching the cube in action: ::pos{0,2,7.7358,80.4968,220.3335} visitable in VR though: Warp Cell Cube Demo

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom

A nice looking space shipyard (Big L core) with a lot of lights!! perfect for ship building in space. The bridge on the side are for u voxel liberies u can get to them realy fast with elevators on the ground. If u have any questions ask me on discord Jasper_1. Are u looking for space stations space hangars space factory look no further!! and dm Jasper_1 discount if u buy more: 2 for 12 mil 3 for 15 mill 4 for 20 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Tired of pads being too small for your need? Zealot Company has your needs covered with this quadcore landing pad! It has a complete interior for your storage needs and elevators for mobility around the structure. Stop by for an in-game look at ::pos{0,2,-23.5467,16.8591,36.0142}, you can purchase the bp at ADMI Build Store at the Zealot Company dispensers. Note: Due to the snap tool not overlapping element with voxels each pad has its own set of elevators, some will need to be deleted, if you want and then centered.

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Simple' version, a lower cost entry into the Omnifactory with minimal industry elements required to deploy. This does mean expanding capacity is a little more involved than the up-coming 'Expanded' version, requiring each new industry machine to be linked to each component storage directly. However, the layout configuration and open structure allow this to be accomplished with minimal effort. BP dispenser is set up inside the Omnifactory for a extremely reasonable price of 25Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got less lag! Sometimes, you just need a big space to set up storage or your own customizable factory layout. I got you. Big wide open modular with tons of space inside. Containers, sure. Factory, sure, dead noveans from your pvp conquests...sure. I'm using mine as a nice place to store my voxel libraries so they're not just out in the open cluttering all my pretty space views. Big L size space on top for landing too. Come see it in VR at "Czar in Space Showroom" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155}

This mining platform was designed to mine up to 4 ore types using L mining units. While the mining platform will default to one mining unit per T1 ore, this can easily be changed to mine different ore with upgraded mining units. To expand the number of mining units, just link to the additional units to the mining PB and to one of the containers. To modify the ore type, rename the container element and replace the ore with the new ores full name. Adding/modifying the mining units or containers will require the programing boards to be restarted. This is an early release version of the platform, so some of the items have been reduced or removed due to availability or cost. To further save on deployment cost, you can change the honeycomb type to fit your available ore type.

Greetings! I present to you a warp cell factory that produces 540 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 20m Quanta 2 - Blueprint + Buffs/Help setting up, 45m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 75m Quanta

Production Per 24 hours with no industry talents Basic Assembly Line XS- x720 Basic Assembly Line S- x180 Basic Assembly Line M- x45 Basic Assembly Line L- x11.25 Basic Assembly Line XL- x6 Basic 3D Printer M- x45 Basic Chemical Industry M- x45 Basic Electronics Industry M- x45 Basic Glass Furnace M- x45 Basic Honeycomb Refinery M- x45 Basic Metalwork Industry M- x45 Basic Recycler M- x45 Basic Refiner M- x45 Basic Smelter M- x45 Transfer Unit- x11.25 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions