Dual Universe Creators

Simple Mining Outpost VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

PYRAMID LUMEN GLASS FACTORY This factory can make a ton of luminescent glass in a day! 12000m3 per day! Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Pays for its self on day one! READ OUR BIO FOR MORE INFO

Available in two different styles! Need 7680kl of storage in a box a lil larger than a XS core? This is the box for you! 10 XXL containers in the space that would normally be only 4 containers. Perfect for docking to ships, or base set ups. Perfect for any place, where you need to save space. Purchase 1 BP for 5m, or 3 BPs for 10m. --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

*Updated 11/1/22* Now includes Jericho's MU-Monitor Pre-Installed. Simply add MUs and link them to the programming board to see all info on one screen!! New BPs Available at D4nkWorks Showroom These are Long-Term Mining Towers with space for 8 Auto-Miners Designed to fit ANY terrain. The bottom of the tower can be sunken into the land as far as needed and has ladders for access from the ground. Add a surrogate pad and you can easily VR there to calibrate your off-world tiles. The landing pad on top fits S core ships easily and provides EZ access to all 8 miners and the Hub. Landing activates the screen which shows how much ore is currently available. LUA included. Basic Mining Towers have space for your Org name on the side to let people know who's mining in style!

A nice litle house for you to relax in, or have it as an office away from office. And when you just need to chill, why not cook a nice steak on the grill on the deck, looking out over the sea.

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Hadron Landing Pad Medium ---Features:--- Detailed voxelwork. Only Tier 1 voxel used. 800m3 Plastic 200m3 Brick 16 easy to place L-Container storage. Plenty of space for adding additional industry like a fuel refinery. With the voxel preview and the coming core snap feature, the pad will easily integrate with your base. Centered to the build box of the M core to allow for more storage or industry below. Visit our showroom in VR (outside area).

Looking voor Flexibel Space Storage? You've found it! A space station to place nearby the planet(s) where you collect the Ore from your Mining Units. You can adjust the number of containers you need by yourself. Just add or remove some. A complete fuel industry 'in-house' is present in the station. All containers and fuel are accessible through a Container Hub in the operating room downstairs. Don't worry, you don't have to walk. Elevators bring you up and down. At the bottom of the space station you find 4 small landing pads to accommodate a drop off point for your small planet surface haulers. Your 'L-core-slow-boot-Freighter' can land on top of the station to pick-up the ore. Wanna have a look at the station? Very easy, visit the Space Station Shop in VR: DSGI Allioth Space Storage Wanna buy a blue print? Located at ::pos{0,0,217810.3365,173069.0911,-75076.1042} you can have a real life view and buy the blue prints. !!! Don't buy the Blue print when you are in VR !!!!

L core Outpost Pad, the perfect companion for the Outpost Building Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

50% off blueprint price at the moment on dispenser A stylish workshop for building XS,S,M core's, plenty of room for deploying your voxel library cores with storage on platform and plenty of freedom to customise your workshop inside like copy and past all your voxel librarys to the inner walls and corners of the workshop for easy access for when your building, placement rules are 1 click down and the enterances are facing you when u deploy the BP you can check it out in VR search for loaded industries showroom for anyone that purchased before 7th may please let me know and i come and release the drm on your building

Sick of building in the dark? Our Work Shop is fully Illuminated for any time of the day building. Stop by on Alioth and take a look. Dispensers on site,

PYRAMID STORAGE ROOM: DONT WANT TO LINE UP 100 CONTAINERS? DONT WANT TO MESS WITH SCREEN LUA? THIS MIGHT BE THE THING FOR YOU! 100 L CONTAINERS PERFECTLY STACKED AND LINKED IN STACKS OF 10 TO HUBS WITH CONTAINER MONITOR LUA. ONLY 1MIL QUANTA ENJOY!

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.