Dual Universe Creators

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

VR "VO Factory Sales" Materials cost on the market was about 6 mil. The cost of BP is $6 mil and that includes me deploying it. You can supply materials and i supply BP and deployment and you just pay me $6mil or i supply everything and you pay $12 mil. The price includes x3) Basic Containers L per section (x9 total). THIS Does Not Include Mining Units. Tri Hex Mining Structure allows you to mine from 3 hexes in 1 building. Equipped with a Surrogate Pod, VR and Motion for container hub. Has Landing pad design ontop with elevator access to main floor. Set up to x8 MUs on each section and room for more if needed. Has Hideaways for up to 10 L containers for each section. I do not have a setup to show anyone step by step. I have this set for token deployment only due to the hard to get ppl to understand the setup. I can place it way faster than the time to walk anyone thru the process.

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

Ikara Industries presents the "Ikara Warp Cell Tower S01 V2". Optimized Version of the "Ikara Warp Cell Tower S01 " You want to visit distant planets, but flying takes too long? Then the "Ikara Warp Cell Tower S01 V2" is just the thing for you. With this Warp Cell Tower you can produce up to 528 Warp Cells per day depending on your talents. (testet with level 4 talents on all parts) The Tower includes: - 9 L container for pure ore - 1 L container for the warp cells - Container script (ContainerMonitoring) provided by DU_ASTco - Schematics monitor provided by GcGoat - S core - 2 to 8 units each for the production of the Warp Cell intermediate parts - 16 Uncommon glass furnaces for manufacturing the warp cells. - The outer walls can be replaced with the separately available Ikara Panel Kit S01. What else you should know: - All signs can activate with the manual button underneath the main screens - For efficient and uninterrupted warp cell production, the factory should run for 24 hours without warp cell schematics. VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries or Ikara Industries Exchange (in the Yellow Hall of Alioth Exchange) Any questions? - Message to @Ikara2184#2629 on Discord.

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

Note: Some furnishings in this blueprint require the Art Deco (Silver Backer Rewards) Features: 600kl of storage Once a simple house for servants at the Ivory Island Resort. After new management took over servants were evicted and the housing upgraded to include luxury amenities, staff now commute to work from the mainland. This house includes a new custom art piece that is AI Generated through the use of variables and prompts. Furnishings also include Art Deco pieces from old Earth, that are limited to the most affluent of clients. (Tokens will not be made available)

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

VR "VO Factory Sales" This will make every type and every size screen on the market! Screen and Sign Factory 24 Hour Production with no Talents x 3.75) Expanded Modern Screen XXL x 3.75) Expanded Modern Transparent Screen XXL x 60) Modern Screen L x 240) Modern Screen M x 240) Modern Screen S x 15) Modern Screen XL x 240) Modern Screen XS x 60) Modern Transparent Screen L x 240) Modern Transparent Screen M x 240) Modern Transparent Screen S x 15) Modern Transparent Screen XL x 240) Modern Transparent Screen XS x 240) Screen M x 240) Screen S x 1) Screen XL x 240) Screen XS x 240) Sign L x 240) Sign M x 240) Sign S x 240) Sign XS x 3.75) Super Expanded Modern Screen XXXL x 1) Super Expanded Modern Transparent Screen XXXL x 240) Transparent Screen L x 240) Transparent Screen M x 240) Transparent Screen S x 240) Transparent Screen XS x 240) Vertical Sign L x 240) Vertical Sign M x 240) Vertical Sign XS If you have any questions please feel free to reach out to me on Discord: theOmega28.36#1869

*Updated 11/1/22* Now includes Jericho's MU-Monitor Pre-Installed. Simply add MUs and link them to the programming board to see all info on one screen!! New BPs Available at D4nkWorks Showroom These are Long-Term Mining Towers with space for 8 Auto-Miners Designed to fit ANY terrain. The bottom of the tower can be sunken into the land as far as needed and has ladders for access from the ground. Add a surrogate pad and you can easily VR there to calibrate your off-world tiles. The landing pad on top fits S core ships easily and provides EZ access to all 8 miners and the Hub. Landing activates the screen which shows how much ore is currently available. LUA included. Basic Mining Towers have space for your Org name on the side to let people know who's mining in style!

BP dispenser located on Alioth at ---> ::pos{0,2,24.6416,120.5044,3.8850} That building is in an L Core. I don't like the huge factory blocks at all, so I took an L Core and gave myself free rein in the dimensions and design of the building. From my point of view, the entire core does not always have to be used. It is important to me that buildings fit in well with their surroundings, be it in the city or in the country. The building is an empty shell! Setting up the factory or your office in the building is entirely up to you. Below the asphalt there is enough space for you to build your own cellar with containers and industry. you can find the core in the center below the floor if you have any questions or suggestions for improvement, please let me know! VR: "Calpone Showroom" dispenser ---> ::pos{0,2,24.6416,120.5044,3.8850}