Dual Universe Creators

Static construct for mining units. DRM FREE S core 3 L container for up to 576kL. (lvl5 container skill) Over two weeks storage of mining an 600L/h T1 Field. Space for 12 mining units and 2 reinfocred sliding doors (Not included in BP) Containers/Surrogate etc. can be removed after placement with no impact on design. Could also fit forcefields (prepared on 4 sides) if you need ramps. Room for custom voxel letters on 2 sides. (See picture, BP is blank) Shopping List: S Core (Nano craftable) Ressurection Node/ VR Pod VR Station (Nano craftable) 3L Container + Hub 94m3Orange Plastic (Nano craftable) 408m3 Gray Plastic Visit my VR on alioth. VR: Hadron HQ Alioth

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Built in the same theme as my #1 selling L Core Factory. 3x's the room and still includes the full L core landing pad on top for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

Derrick (Nodding Donkey, Pump Jack) Mining Unit. Holds 4 Mining unit L. 1x L container with Hub. Screens and board for Lua. Space underneath for Ore Collection. Comes with 4 Basic MUs, 1 L Container, 1 Hub, 2 Screens, Prog Board, Vr Pod, lights etc.. Most Voxels in Iron. All Basic Stuff

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

L core tower with Hangar and lots of space for Industry VR: SKY Blueprint Store ::pos{0,2,54.1655,109.9058,46.1828}

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

derrick d'exploitation minère fabriqué par Efchaos 4 mineur + 1 container M il reste de la place autour pour ajouter des mineur ou meme un conteneur XXL expanded avec aussi un container a colis XXL VR: Spaceboys beach club n'achetez pas en VR

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

Back in beta I began piecing together a static L-core for my large Tatooine city project based on Star Wars Galaxies/Battlefront - Now you can enjoy it as well! Everything is an original version or elaboration based on the old school style. FEATURES: • Main trading hub building • 3 Custom workshops/houses • Speeder/podracer parking • Two XS-sized landing pads • Negotiator's Patio/Lounge • Junkyard • Defense Turret (Has 1 M, 2 S containers within) • Unique decorations: moisture vaporators, display carts full of commodities, (Entry sign reads 'Trading Post' in Aurebesh-font) • Space for additional buildings, alleys, yard decorations, the possibilities are endless! ***SWAPPABLE DYNAMIC PIECES: Blueprint includes most everything shown in the sample pictures but the central 'City Shuttleport', 'Bazaar', and 'Vehicle Garage' are optional sold-separate dynamic (or static) cores. This gives you even greater power over your city as you can change out the look/feel of different areas on the fly without having to copy/paste things. ***Screen images, Art, Logos -Hutt Clan Logo assets.prod.novaquark.com/54643/5f222890-c181-4cb6-8e41-921b6e3fa1a3.png -Flag of Tatooine (twin suns) assets.prod.novaquark.com/54643/897fa331-4dd1-4635-9f97-1803b38385c6.jpg *Blueprint will include extra 'fluff' details on the carts, dispensers, or additional polishes as they're added. I can't remove dispensers from main hub due to a bug NQ is trying to fix so for now what I have is what everyone else gets but you can choose to not spawn dispensers in now with the optional system.

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

Greetings! I present to you a warp cell factory that produces 540 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 20m Quanta 2 - Blueprint + Buffs/Help setting up, 45m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 75m Quanta

DPS Pads - built as building area pads, also usable as showroom and parking pads. Single static XS 2,500,000) and S (3,000,000) BPs DRM protected. DRM free BIY kit and space versions available soon. VR: Deeh Store (dispenser + preview -> basement) If you have questions, don't be shy - contact me on Discord!

Modern, spacious and affordable accommodation. The balcony style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony of the 2nd floor provides a great cover for several personal speeders, protecting against casual collisions and weather, should the environment be a little rough. Built on the lowest of the constructs grid structure, this spacious condo provides ample opportunity for further expansion upwards, should the new owners wish to add on a 3rd floor. With big windows and a front and back balcony, one can always enjoy spectacular views, while resting in comfort. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}