Dual Universe Creators

PYRAMID AMMO FACTORY RGEAMS This factory makes a ton of ammo! makes 4 types of rail gun ammo: M and S and L* electromagnetic and antimatter produces approximately 2500 S and 1500 M per day depending on your talents. we also make custom ammo factories. 5 mil down 5 mil on completion Since launch *THIS FACTORY MAKES ALL THE NECESSARY PARTS FOR L AMMO TOO. JUST PLOP AN L ASSEMBLY LINE DOWN AND LINK FROM THE APPROPRIATE CONTAINERS. I CAN HELP WITH THIS UPGRADE IF YOU CONTACT ME. READ OUR BIO FOR MORE INFO

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

New pads from The Gray Order (changed name from ADMI to Gray) Large core fully detailed with easy to use placement the footings are a basic voxel shape so if you need to make it taller is super easy! There are 2 dispensers one for regular 6mil and other is for discount option if you want 10 for 10mil off ( 50mil instead of 60mil) thanks for shopping cords for base are same VR "ADMI build store" position ::pos{0,2,-24.6313,16.8071,150.4663} name subject to change soon will alter here too.

Pyramid space warp cell factory: Just like our static version but for space! 244 per day. Up to 288 with higher talents. Instructions in factory on how to operate it. Can start with one warp cell schematic and work your way up. Follow a 1-1-1 ratio of warp cell schematics, advanced anti-matter core, advanced quantum alignment unit Follow a 1-3 ratio of advanced anti-matter capsule to warp cell schematics. That way you don’t have to drop 45mil on schematics right away. Read our bio for more info and where to find the schematic list. Happy warping!!

Floating Dock DRM free VR: "Alioth Marina"

Pyramid mega container factory: Makes every size container xs s m l xl xle makes every size ammo container xs s m l makes two of each size at a time all machines labeled to make schematic placement a breeze schematic lists for all our M core factories can be found on our discord like all our factories comes with in game and discord support

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

Welcome to DarkWarp. A S-core warpcell´s factrory. Used by the Terran Empire. If you can fuel the little monster, it gives 16 WC/H. An awesome small factory for personal use, but also for selling warpcells, it will give you aprox. 380 WC/day. And thats more that enoght to earn some quanta. Come on by VR: Dark Forges HQ to check it out.

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

50% off blueprint price at the moment on dispenser This is a complete kit of my landing pad without basement, you can make any size landing pad you like even connect 4 cores together for extra large one or even larger, ive tried to make the instructions as simple as i can but hopefully if your interested in this kit you already know how to copy and paste and rotate etc please check out the pictures for more info and if you need any questions answered dm me on discord loaded#2378, location on your right in the info and the dispensor is in front on the landing pad, i also added a base part with no wiring details also u will want plenty of medium glass panel to go over the wiring detail, can also change the colour to your what ever you like. PS no need to press shift when adding the leg stands