Dual Universe Creators

UPDATE now available in new release. Just came back to the game, prices may be negotiable contact me in game or on discord Vazrik#6937 *4,000,000 per core, Not including materials. Recommended Galvanized gray aluminium and Luminescent White glass. 4100 honeycomb single voxel thick per core 8200 honeycomb double voxel thick per core 1 L core per core Roughly 200 Luminescent glass per core (may vary but its a good starting guestimate) *Custom built to match your current setup. *Accurate runway measurements and markings(doubled in size to increase visual and utility) *Recommended at least 16 cores in length, 13 cores in length is minimum for this design. Redesigns are necessary for anything smaller, this may be possible to achieve but will be at additional cost. *Can add taxiway's or possibly parking pads if needed, should be no change in price per core depending on the request.

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

(Contains empty open spaces for starter industry placement.) Due to the hostile environment they live in the Dune Dwellers of Haven are not discrete in their willingness to steal materials and technology from the UEF. While they may not hide from other factions they do make great efforts in shielding themselves from the hot punishing sun. Note: Does not include Mining Silo, Sand Raptor, or Dune Hauler. (Tokens will not be made available) Featured by: - Landmark Explorer Twitch Channel

The plan was to test out how to make a space station about 65KM from the planet. Assuming I'd succeed the idea behind the station was to use it for making fuel and basic scrap without having to land on the planet. So I obviously succeeded at making the space station however, the location was completely wrong for the job. It turns out you need to make the space stations away from where your bases are and stock them with resources you need at those locations. That said it was fun doing it for the first time and the views are super.

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

We are also located at the Alioth Exchange in the Red Isle This Static Core Factory produces all size cores This is what it will produce every 24 hours with no industry talents XS Static Cores---720 S Static Cores-----180 M Static Cores----30 L Static Cores-----7.5 For any questions, please reach out to me on Discord We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

ALL PRICED CUT FOR THE NEXT 2 MONTHS FOR BP'S NO TOKENS AVAILABLE FOR THE TIME BEING "Some vermit alien stole!!!!??? my gas station and dragged it up into space!!!" Its a labor of fun really a simply easy to run gas station with all fuel types ready to pump out for your use in space. No lua no mad scripts just put in your ore and let the machines run and it all just simply works no need to make a large crazy factory for gas. Just keep this beast fed it will keep you flying. I'm not doing tokens and the schematics needed are below. Hope everyone likes it and comes and gets one for themselves. VR to Broken Skull Ship Shop

Ikara Industries presents the "Ikara Landing Pad KIT T1 (DRM Free)". You have a nice ship but you don't want to land on earth. Then the Ikara Landing Pad KIT T1 is just what you need. The landing pad kit includes - DRM Free - Staircase to the landing pad - 2 different designs - Recess for two screens Placement rules: Hold SHIFT, If you set the modules. What else you should know: Examples: Building a S Core version 4 x Modules Variant 1 Building a M Core version (one side) 4 x Module Variant 1 (4 voxels remain, just move the panels by 2 voxels in each direction) to Buy, Questions? - Message @Ikara2184#2629 on discord.

Available in two different styles! Need 7680kl of storage in a box a lil larger than a XS core? This is the box for you! 10 XXL containers in the space that would normally be only 4 containers. Perfect for docking to ships, or base set ups. Perfect for any place, where you need to save space. Purchase 1 BP for 5m, or 3 BPs for 10m. --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

This factory is perfect for starting a mega factory in space from scratch. All T1 setup is already in BP with all products and parts. You can easy start to build everything you need with this setup. 5 floors T1 to T5 and a big space with view on planet with glass panel You only need puts ores and schematics to begin. To visit the factory in VR, contact me on discord : kromen New Alioth Dispenser ::pos{0,2,41.7148,93.8707,74.8080} Visit Factory ::pos{0,0,-13786.3354,203690.3859,55550.9950} VR : Space Factory Beginner Credits for scripts : https://github.com/LocuraDU/DU-Locura-Storage-Info https://github.com/codeinfused/Indy-Hud Credits for Landing pad and wall : https://du-creators.org/makers/Loaded%20Industries

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

50% off blueprint price at the moment on dispenser This is a complete kit of my landing pad without basement, you can make any size landing pad you like even connect 4 cores together for extra large one or even larger, ive tried to make the instructions as simple as i can but hopefully if your interested in this kit you already know how to copy and paste and rotate etc please check out the pictures for more info and if you need any questions answered dm me on discord loaded#2378, location on your right in the info and the dispensor is in front on the landing pad, i also added a base part with no wiring details also u will want plenty of medium glass panel to go over the wiring detail, can also change the colour to your what ever you like. PS no need to press shift when adding the leg stands

Step up your mining ops with a Thumper Mining Laser from Dumboiz United. This S-Core mining unit is here to do some work! 4 mining units converge at a singular point, making gathering your surface harvest easier than ever! One large container is neatly stored up top, with a VR platform and container hub placed conveniently at the ground level. The core itself sits on the floor of the build box, making placement easy, and cleanup a breeze. Quit wasting time at your mining units! Calibrate 3/4 of your mining units from one spot, harvest all of the surface ore from one spot, and find your mining station from from a kilometer away with the scale and light emitted from this laser! Everyone has a platform, now. Everyone's going to have a Thumper. (Currently equipped with Basic Mining Units -- if you want to upgrade your laser, message isyron#4015, bring 4 upgraded units, and he'll do the swap and give you the BP!)

Vortex Geometry has developed a mining platform. The platform is called "DREDGER" and is very easy to operate and has an awesome futuristic look and feel. The container is located at the top of the structure, a hub container is connected to it, for convenient access to the ore at the level of the character's height. By the same principle, the mining units themselves. The platform is designed for 4 L Mining Units ____________________________________________________________________________________________________ NOTICE!!! * Blueprints what we are sold it is non core blueprints. ** When ordering more than one BP, you get a discount 15%(BP). If you have any questions, or want make order - please contact me on the discord.

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI