Dual Universe Creators

2B Designs Hangar L Core Size Hangar - Plenty of Workspace - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - Good Size Landing pad - Elevator / Hole Access to floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) VR: "2B Hangar 2B01 Display" For a display of the Hangar Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Medium core variant of the Deluxe pads at the store location they use the same type of voxels the ones that where built where in a different color to show the flexability of the pads as far as matching whatever you want to use them for. The pads in the pictures are a grouping of 6 pads set to a center 7th core that a customer wanted. Enjoy!!! p.s. bottom stem can be deleted if not wanted so just the walkway and pad underneath up to you! VR ADMI temporary store to get location and dont buy in vr.

Large Hanger Pick your accent color or Luminescent color glass of your choice when you deploy your hanger. Build Comes Standard with Blue Luminescent Glass. The build is sized to accommodate the XL Gates when you are ready to add hanger doors, admire the magnetic gantry cranes. location: ::pos{0,2,5.1035,163.8590,28.5577} POC: Puunene#4859 VR: Puunene Hangers

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

Own a Warp Beacon of your own - Then make one , in this faithful recreation of the must have strategic element. Get the Bacon cooking ! With DIA customised industry, storage and schematics monitoring and IC industry AR HUD scripts, incorporated into a modern stylish command room, you'll know precisely what you need and when you'll get your coveted beacon. Configured to be able to produce two beacons per month, all machines and storage are linked and signed with what to produce and appropriate maintain levels. Come see the wonder at the DIA Plaza and find the BP dispensers in our Showroom display. For those not interested in cooking bacon, but other tasty treats, get the voxel shell to build your own factory into - only 20Mq

When not crashing into the ground at 5000km, perhaps you'd like a place to land nicely with a touchy of style on something that's super easy to put together? Sounds like CzarsLandyPad might work for you. I like the looks, my mom likes the looks, my dog thinks it's stylish, and my goldfish can put it together. Customizable from XS size all the way to custom multiple core sizes. As a perk, when assembled, a landing pad can also house all kinds of stuff inside....yes, inside! Tall enough for a large container which we all know can house many dead bodies from your pvp conquests or imagination. DRM free It's on an XS dynamic core so you can put it anywhere and even dock and transport. Come see them in action: Alioth Space VR coming soon

Pyramid Container Factory: OUR TOP SELLER Can run 2 L schematics or 2 M schematics or 1 L 1 M simultaneously. producing 16L or 32 M per day. or 12 L and 24 M. At the same time it will produce S, XS containers @ 48 and 96 per day simple design. Ore in, waste out, product out. everything is container hubbed for easy expansion. READ OUR BIO FOR MORE INFO

This M Core Factory Shell will fit Tier 1-3 ore refiners and product plus assembly lines. Fits 1 XL Assembly lines. 1 basic or 1 uncommon. Plus a mix of any lines you want. Makes organizing your production easy. Room for all your containers in the ceiling. BP Requires M Core 1 Basic container XS (schematic container) 1 Detection Zone M 4 Elevator XS 1 Relay XS 2 Screen XS 2 Sliding Door M You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000} 6 Square Light M 6 Square Light S 9 Vertical Light M 7 Vertical Light XS 4 Window M