Dual Universe Creators

A landing pad on L core. Built on top of core, with a bit of margin so you can still place biggest elements and / or build a bit, and expand underground. Easy to place with its big pillars Can be seen on VR: Aerogics L Core Landing Pad *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Yellow Plastic: lines on landing area Luminescent White Glass: inside lights Luminescent Yellow Glass: outside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura L6 is part of our Lightweight Series. Designed to have a lot fewer elements and also cut down on Honeycomb usage. The L Series is a cheap, lightweight alternative for those needed fast deployment of rigs. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Greetings! I present to you a warp cell factory that produces 240 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 15m Quanta 2 - Blueprint + Buffs/Help setting up, 30m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 50m Quanta

base spatial "Orbitonia" fabriqué par DeadZonne nous vendons uniquement en token et je fais le deployment car c est un peu particulier avec la tete en bas... il faut un parking large deja installé pour deployer la station spatial a coté. vous devez avoir de quoi installer un ascenceur 10.OOO tons sous la station dans sa grille de construction. la station est visible avec le VR: Spaceboys fuel Alioth

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

Thank you to everyone who was interested in this project. This has been sold to Fyrestrider. Please reach out to him in-game with any questions. This was sold as a one-time piece, DRM-Free Core BP and token. I do not have the ability to make another, only Fyrestrider does. Perso is a shore-based fixed mining platform. Originally designed for The Wendence Bauxite Meganode on Feli by the now-defunct Cracker Barrel Org. Construction started 12478 and completed early 12482, it reached peak production in 12490. Decommissioned in 12501 and transported via VTOL to its current position at Satrion Corporation's Feli Restoration Plant. ::pos{0,5,10.4711,-153.5337,18431.2520} Surrogate VR - Perso The restoration of Perso has seen multiple setbacks. Lack of interest and funds to restore the mining relic has led Satrion Corp [RION] Board of Directors to fund simple upgrades, such as auto-mining units, fuel refining, and a converted second-floor executive lounge for ore production and repair parts. Other restorations include all new lights throughout, upgraded safety barriers for NQSHA compliance, as well as all-new gas-filled windows in all areas for a comfortable mining experience. "We believe the current upgrades will more than suffice for today's demanding mining needs." Said Armand Reed, CEO and head of product development at Satrion Corp. Both lower-level and rooftop cranes are non-functioning. Stairs from first-floor offices to the second-floor executive lounge have been removed, as well as stairs to rooftop access. Elevators have been retrofitted in these areas for more dynamic access to second-floor ore refining and rooftop storage. Ground level access to fuel refining with large amounts of Nitron storage. Detection zones to auto open and close doors. A force field to the executive lounge catwalk to ensure pressurization allowing this rig to be transported to moons for non-atmospheric applications. All new electrical for the upgraded areas. Fully compliant with the current Novean Institute of Standards. All concrete sub straights have passed all inspections for compressive strength. All metal girders have received full restoration and a fresh coat of Rooster Red Paint from the Sinnen Paint Company. (Certification Available upon request) Note: This was not designed for habitation. Does not include bathroom facilities or sleeping quarters. Please check system-wide and local planetary authorities before converting for such uses. Any unauthorized conversions will be at the new owner's full expenses and liabilities. Satrion Corp [RION] is not liable for any future fines. Check with your local authorities. Features: Five Auto-Mining Units (With equipped hyperdiamond core-bits, Non-Cason Compliant) Five ore refinery stations. (Room for more, electrical not included) One Nitron Refining. One X4 Refining. (Compatible for X1, X2, X3 - Tank scrubbing required for fuel type change) All New LIghts All New Windows Upgrade pressurized doors and locks. Safety barriers installed Emergency Exit ladders have been installed. Redecking of the rooftop landing pad (NQSHA Compliant Lighting added) Satrion Corp [RION] is selling Perso as-is and does not include any warranty. It will be a DRM-free one-of-a-kind token. We will hand out our only Core Blueprint as well as the tokenized construct at the time of sale. It is recommended a certified NQSHA inspection is complete before attempted use of any lower-level or rooftop crane. You will need to make arrangements with a rigging company of your choice if you do not have the means to transport this yourself. ((This is a one-of-a-kind piece. I will not replicate this after this piece sells. I am also not keeping a copy of any blueprint or core blueprint after the sale. It will be the only one in existence unless you decide to make more blueprints))

PYRAMID LUMEN GLASS FACTORY This factory can make a ton of luminescent glass in a day! 12000m3 per day! Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Pays for its self on day one! READ OUR BIO FOR MORE INFO

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

Available at Coords: ::pos{0,2,38.9120,109.2847,89.6767} is this beautiful 8-bay mining station! - Plenty of room below to collect ore processed from calibrations - Basic Container M to collect ore, with a beautiful shroud to cover - Shrouded mining units - Easy Access - Up to 8 Mining Units to place, no matter their size - Feel free to VR to MATTENASH INDUSTRIES to take a look before buying Friendly reminder to not buy in VR. Happy Mining!

This is my entry for the 'Build Your Legacy' competition and while I think it fits the requirements I do not like it as much as the speeder I submitted. I think it is mainly due to the colours as I have not built with Tier 1 ore (Except concrete) for a long time so I only really had the colours provided to work with. It does feature a pad for parking your speeder underneath the structure. My favourite aspect of this design was the stands I setup for the mining units.

Better then Dirt No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

This mining factory is suitable for 8 Mining Units and 2 M Size Container or 1 L Container for Ore Storage. Build on cheap rescources it can be almost hand-crafted in your Nanocrafter. The blueprint do not contain any Mining Units or Containers. Feel free to place yourself. Get your blueprint at the dispenser. If you want to have the honeycomb and elements too, have a look on the second dispenser. You can also write me an message if blueprint is not available at the dispenser

Looking voor Flexibel Space Storage? You've found it! A space station to place nearby the planet(s) where you collect the Ore from your Mining Units. You can adjust the number of containers you need by yourself. Just add or remove some. A complete fuel industry 'in-house' is present in the station. All containers and fuel are accessible through a Container Hub in the operating room downstairs. Don't worry, you don't have to walk. Elevators bring you up and down. At the bottom of the space station you find 4 small landing pads to accommodate a drop off point for your small planet surface haulers. Your 'L-core-slow-boot-Freighter' can land on top of the station to pick-up the ore. Wanna have a look at the station? Very easy, visit the Space Station Shop in VR: DSGI Allioth Space Storage Wanna buy a blue print? Located at ::pos{0,0,217810.3365,173069.0911,-75076.1042} you can have a real life view and buy the blue prints. !!! Don't buy the Blue print when you are in VR !!!!

Tiered of not having a good spot to park your ship? Want to have a cool platform to display your creations on to sell? Or u just want a cool looking landing platform for your base. This landing platform could be the solution. It is the full size of an L core, whit room below to place at least a big EXL container. -Big enough to park or showcase multiple ships -Stairs for easy access to the platform -Lights for decoration set to blinking in a neat pattern ;) -Highly detailed -Comes whit a re-color kit The Landing Pad is available as BluePrint from a dispenser located near the platform. U can take a look through VR, search for "CCU Voxel Library" Location >Alioth ::pos{0,2,34.8012,72.5860,258.3008} Whit our all in one service we offer u the following options: BP from dispenser 10M All honeycombs needed from dispenser 1.25M All lights if u want those from dispenser 1.4M Take care Noveans and enjoy your day!

M core with landing area on top Identical to the other M landing pad module but without interiors (uses less honeycombs) 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Purple Plastic: replace with color of your choice when customizing 3.5k alu 700 plastic 200 iron 100 carbon fiber / steel