Dual Universe Creators

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

This will Produce with no indy boosting talents every 24 hours: Uncommon Assembly Line XS 240 Uncommon Assembly Line S 60 Uncommon Assembly Line M 15 Uncommon Assembly Line L 3.75 Uncommon Assembly Line XL 2 Uncommon 3D Printer M 15 Uncommon Chemical Industry M 15 Uncommon Electronics Industry M 15 Uncommon Glass Furnace M 15 Uncommon Honeycomb Refinery M 15 Uncommon Metalwork Industry M 15 Uncommon Recycler M 15 Uncommon Refiner M 15 Uncommon Smelter M 15 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

PYRAMID FUEL FACTORY: MAKES FUEL, AND A LOT OF IT MAKES; NITRON 600KL PER DAY KIRGON X1-X4 300KL PER DAY OF ONE OR APPROX 75KL OF EACH EASY TO SET UP, EASY TO EXPAND STORAGE WE NOW HAVE A MODEL THAT MAKES XERON TOO 100KL PER DAY same price READ OUR BIO FOR MORE INFO

Last few months I have been working on this Market Replica. It worked out pretty well. Just check it out in VR. (Market Replica East and Market Replica West) Note: No market machines included. ;-) Place your dispensers there or do what you like. Beneath the base there is a ton of space to make a factory or anything you like. Currently available @ Drack shipshow. Later available @ Kosmos showroom.

Static construct for mining units. DRM FREE S core 3 L container for up to 576kL. (lvl5 container skill) Over two weeks storage of mining an 600L/h T1 Field. Space for 12 mining units and 2 reinfocred sliding doors (Not included in BP) Containers/Surrogate etc. can be removed after placement with no impact on design. Could also fit forcefields (prepared on 4 sides) if you need ramps. Room for custom voxel letters on 2 sides. (See picture, BP is blank) Shopping List: S Core (Nano craftable) Ressurection Node/ VR Pod VR Station (Nano craftable) 3L Container + Hub 94m3Orange Plastic (Nano craftable) 408m3 Gray Plastic Visit my VR on alioth. VR: Hadron HQ Alioth

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

Features: The Ta'veren Mega Factory is a fully modular, easily-expandable, space or static factory BP for those of you who want to link up a machine to print an end part. This factory is set to produce all components for tiers one to four. All parts with multiple outputs are designed to cycle contents. If you need more links, simply add a new box and transfer unit, remove the link from the topmost box to the bottom transfer unit, pointing to your new transfer unit, whose output goes to your new box, and link the new box to the bottom transfer unit. If you find it isn't producing as many parts as you need, simply add a new machine on top of it and have the output go to the next box. All industries are named with what they produce, as are the output boxes, so you can easily identify where things link. Color coded borders surround industries with what Tier. Also comes with DU-Locura-Storage-Info for ores and IndyHUD for your industry monitoring.

Decorative Element 20 Voxel Diameter drm free VR "Alioth Marina"

The Terrans are at it again. With the Terran Offworld mining OP, (OmO), you will get a plattform with a custom LUA script. Were you will know how mutch money your tiles cost you a week/12 weeks by adding the quanta they cost. So that means that you have controll on the tile cost out in the cosmos. There are room for 7 L MU´s AND a small manufactering capability, like fuels och convert the ore directly to pures and so on. And the best part is that there are 8 L containers for the ore your gathering, and 1 L container for fuel storage and 2 L containers for other storage. With this large amount of L containers you will not need to travel that often to empty out the ore.

In the process of moving, blueprints are available to Kosmos Exchange. It's Honeycomb...in space! No longer will you need to make element only ships deep in space, put some voxels on it and style that thing up! PvPers, come on, put a skin on that naked hot dog you're shooting with. You can even dress it up as an actual hot dog with the right voxels at your fingertips. Factory is built on my Fidget station technology and features T1-T3 honeycombing capabilities. Easy to use LUA control for the honeycomb machines (html needs to be enabled for T3 due to a technical issue with Aerogics honeycomb script so using SilverZero's older script that still works like a champ). Come see it in VR at "Czar in Space Showroom" either fly outside or head to the small unmarked door on the end with the landing pad sets. Located in person here ::pos{0,0,-41989.3752,202219.7557,33651.8498}