Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Moved to Alioth, 7km north of Market 6. ::pos{0,2,39.2832,101.0451,299.8752} VR to "Pagoda".

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

VR "VO Factory Sales" This will make all sizes and all models of atmo fuel based Engines including Hover engines!! You can make x4) Large, x2) Medium x2) Smalls and x2) X small engines at the same time All my factories are built to make it easy for the new players or players that dont have much experience in factories and everything is labeled to let you know what to set each unit and each unit or set of units also lets you know what schematics are needed!

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

The newest addition to Terran empires buildings. This is the mining plattform Terran Excavator (TE), that are adressed to the new players. But yet at the same time to the experianced player, who can use it for higher tiers of ore due to the low cost. There are room for two (2) Mining units. and a capacaty of mining storage of 48 KL (With talents), in 4 small containers on the roof. There are also room for two (2) small parcel containers outside, if needed to use the mission system. And ofcourse there are even a resnode, vr station and vr pod installed. And there are still more room for you to add more storage. The "TE" is coming in five different tiers of MU´s. Basic Uncommon Advanced Rare Exotic The (*) shows witch one are up for a full package sale. We even have the "Territory helper" scrip installed for you to keep track on the cost for your tiles.

No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

This L Core Silo is great for extra storage space with room for 10 Expanded XXL containers. Place this in the middle of your flower and start filling. Room for parcels containers and more. You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Hadron Landing Pad Medium ---Features:--- Detailed voxelwork. Only Tier 1 voxel used. 800m3 Plastic 200m3 Brick 16 easy to place L-Container storage. Plenty of space for adding additional industry like a fuel refinery. With the voxel preview and the coming core snap feature, the pad will easily integrate with your base. Centered to the build box of the M core to allow for more storage or industry below. Visit our showroom in VR (outside area).

VR: "VO Factory Sales" This will produce all Uncommon Engines 24 Hour Production with no talents Uncommon Military Atmospheric Engine XS - x240 Uncommon Military Atmospheric Engine S - x60 Uncommon Military Atmospheric Engine M - x15 Uncommon Military Atmospheric Engine L - x3.75 Uncommon Military Space Engine XS - x240 Uncommon Military Space Engine S - x60 Uncommon Military Space Engine M - x15 Uncommon Military Space Engine L - x3.75 Uncommon Military Space Engine XL - x1.8 Uncommon Military Hover Engine S - x63.8 Uncommon Military Hover Engine M - x15 Uncommon Military Hover Engine L - x3.9 Uncommon Military Flat Hover Engine L - x3.9 Uncommon Military Vertical Booster M - x15 Uncommon Military Vertical Booster XS - x254.8 Uncommon Military Vertical Booster S - x63.8 Uncommon Military Vertical Booster L - x3.9

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

This is the IC small core storage and industry building. There is enough room in the bottom for 6 10 stacks of large containers and some refiners or other industry. It includes 4 hub stations and screens and programming boards up to for easy inventory (Lua not included). It also includes a mesh floor for easy moving and linking of elements from the hub area.

Shop station A nice looking round station that is perfect to build a shop in it. Can also serve as a storage place. And u can make it very easy custom because i dont touch the side of the round parts. -fits 144 L container! Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Pyramid space warp cell factory: Just like our static version but for space! 244 per day. Up to 288 with higher talents. Instructions in factory on how to operate it. Can start with one warp cell schematic and work your way up. Follow a 1-1-1 ratio of warp cell schematics, advanced anti-matter core, advanced quantum alignment unit Follow a 1-3 ratio of advanced anti-matter capsule to warp cell schematics. That way you don’t have to drop 45mil on schematics right away. Read our bio for more info and where to find the schematic list. Happy warping!!