Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Roads for the ADMI Deluxe Pads easy to place and easy to change colors for! Location is the same ::pos{0,2,-24.6313,16.7490,95.7777} as the pads and vr.

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check you joins before you deploy construct.

Features: The Ta'veren Mega Factory is a fully modular, easily-expandable, space or static factory BP for those of you who want to link up a machine to print an end part. This factory is set to produce all components for tiers one to four. All parts with multiple outputs are designed to cycle contents. If you need more links, simply add a new box and transfer unit, remove the link from the topmost box to the bottom transfer unit, pointing to your new transfer unit, whose output goes to your new box, and link the new box to the bottom transfer unit. If you find it isn't producing as many parts as you need, simply add a new machine on top of it and have the output go to the next box. All industries are named with what they produce, as are the output boxes, so you can easily identify where things link. Color coded borders surround industries with what Tier. Also comes with DU-Locura-Storage-Info for ores and IndyHUD for your industry monitoring.

Last few months I have been working on this Market Replica. It worked out pretty well. Just check it out in VR. (Market Replica East and Market Replica West) Note: No market machines included. ;-) Place your dispensers there or do what you like. Beneath the base there is a ton of space to make a factory or anything you like. Currently available @ Drack shipshow. Later available @ Kosmos showroom.

A wall made of 3006 animated lights on a dynamic core to welcome visitors :) You can see it here : ::pos{0,2,-23.9491,-10.5283,119.8070} (Yentico base in front of Alioth Market 13) To visit in VR, search "Light Wall" Peace - YesmanDu974

Available at Coords: ::pos{0,2,38.9120,109.2847,89.6767} is this beautiful 8-bay mining station! - Plenty of room below to collect ore processed from calibrations - Basic Container M to collect ore, with a beautiful shroud to cover - Shrouded mining units - Easy Access - Up to 8 Mining Units to place, no matter their size - Feel free to VR to MATTENASH INDUSTRIES to take a look before buying Friendly reminder to not buy in VR. Happy Mining!

L core Outpost Pad, the perfect companion for the Outpost Building Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store

M core with landing area on top, and one level of rooms below for decorating / small industry / storage 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Blue Plastic & Luminescent Icy Blue Glass: replace with color of your choice when customizing 4k alu 1.5k plastic 500 iron 100 carbon fiber / steel

We are thrilled to announce the launch of the Double L Core Hangar. This hangar is designed to provide you with the ultimate storage solution for your ships. With its Double L Core design, it offers ample space for your ships while keeping them safe and secure. The Double L Core Hangar is built to last, with a sturdy construction that can withstand even the toughest of conditions. It is equipped with the latest technology to ensure that your ships are always in top condition, with advanced climate control systems that regulate temperature and humidity levels. Whether you’re a seasoned pilot or just starting out, the Double L Core Hangar is the perfect choice for all your storage needs. So why wait? Get your hands on the Double L Core Hangar today and take your flying experience to the next level! 2 Blueprints included VR: SKY Blueprint Store ::pos{0,2,54.1655,109.9058,46.1828}

Deluxe pads in space on a Large core took a min but its now done the current configuration is red lum glass and black carbon fiber witch is totally epic looking! These 2 colors can be easily swapped when placing to your choice of colors. ( if you see orange steel and lum glass also switch kept trying to find and couldnt) Available at admi temporary store until i finish the official admi store thanks !

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

12 Large (static) core runway 2x6. full built with skirt runway is all at the top of the cores so can make skirt taller if desired to put stuff under it. Will be making another much larger version in the future after i make more quanta! vr Admi build store or visit at ::pos{0,2,-24.6842,16.8702,151.5735} runway is outside the landing zone for display will eventually put the landfall pads around it as they are built for it. Thanks for looking and buying and all that stuff!!!!!

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

Welcome to the Dark Forges Scrapyard. VR: DARK FORGES HQ The idea of the Scrapyard is that new players can come and buy elemets that you had on your constructs that's totally destroyed and do not have the quanta to buy/make a new one. Or for the old experienced player that are building new stuff and need to test and experiment with maby a new heat shield etc, so instead of buying/making new stuff, you can save some of your hard earned quanta by paying us a visit. The DAFO think with this idea you bring more to the game, yes you can dismantle an element. But you never know what you will get out of it due to the random component you get. And so to sell the element or even a ship, you can get more out of it. Because face it, you will have more of use of an UNC.atmo L engine, even if you just can repair it 1-2 times more, than one UNC.reinforced frame in your pocket. And yes. We even sell ships at the Scrapyard. We sell them either repaird, with elements that do not have full repairtimes on them, or unrepaird so you can get it cheaper and need to repair it your self. We even buy elements that's broken, the repairtimes are what determines the price of the element/ship that we are looking at to buy. So if you are a scavanger come by and show us what you have. If you are a new or old player looking to save some quanta come on by and check whats in stock. For the best updated prices, head on over to DAFO discord, and check out the Scrapyard chanel. !REMEMBER! The items at the Scrapyard change all the time. So you will need to check out the discord, or visit to see whats in stock!!